|
Description
Many people want to put a TV in the kitchen or an attic room where there isn’t an antenna outlet. In the past, this meant installing a coaxial cable from the nearest outlet - invariably a long distance, or a difficult installation, or with a resulting poor picture. One solution is to use a standard Video Sender connected to your main TV.
However, the standard Video Sender only transmits the same channel as the main TV. If two people wish to watch different programs, then the standard Video Sender isn’t your solution. You want the Video Sender with Cable Tuner.
With X10’s Video Sender with Cable tuner, the extra TV can be tuned to any program independent of the program watched on the main TV. This is made easy by the remote control supplied with the kit.
In addition, the standard features of the Video Sender are also available as follows :
- The transmitter unit takes audio and video signals from the satellite set top box, video disc player, DVD, or VCR and converts them to RF.
- A receiver unit in another room converts the signals back to their original format for connection to a TV.
|
|
Features
- View cable TV in any other room in the
house, with no wires.
- Full bandwidth HiFi stereo.
- Simple to use - just plug it in and switch it
on.
- High quality broadband FM modulation.
- Remote control to select channels included.
|
Technical information
- AC supply: 230V/50 Hz;
- Approvals: CE Mark, ETS 300220, ETS 300440;
- Channels: 4;
TRANSMITTER
- RF output: 50,000 µV/m @ 3m;
- Modulation method: FM (Video & Audio);
- Video input level: 1 v p-p (typ);
- Audio input level: 1 v p-p (typ);
- Video input impedance: 75 ohms;
- Audio input impedance: 600 ohms;
- RF input: 433.92MHz;
- Operating range: 100 m open field;
RECEIVER
- Video output level: 1 v p-p (typ) ;
- Audio output level: 1 v p-p (typ) ;
- RF output: 433,92 MHz 1 mW typical@ 3m;
|