|
Features
On/Off function to control fluorescent or low
energy lamps, air conditioner, fan, coffee
pot, etc .
Available in a wide range of plug styles
(British, German, French, Italian, Eurostyle,Australian/New Zealand, Swiss, Danish, etc.).
Designed to operate with 230VAC 500W loads.
|
|
Applications
The switch plug-in module is a receiver unit that works as a remote controlled switch/relay.
The connected load can also be switched on and off locally.
The switch can be used at any wall outlet in the house.
The switch plug-in module can switch incandescent lamps and low energy lamps, appliances with electric motors up to 230VA or halogen floor lamps with foot dimmer up to 500 W (refer also to "technical
data").
As the X10 switch is simply inserted into wall outlets like an ordinary plug, there is no installation
necessary. Just adjust the settings on the front side
to the desired device address (e.g. G7) and note this
address down in a list.
The load connected to the switch module can still be
controlled locally by its own switch, but do not forget
to leave the local switch in the "ON" position,
otherwise the load cannot be controlled by an X10
controller. Switch the load off by remote control.
The AM12E responds STANDARD X10 protocol : "All
units off" from any X10 controller set to its house
code, regardless of unit code. Or alternatively, by
individual unit control using "On" and "Off".
domodica about this product
|
Technical information
Supply voltage: 230V ±10% 50 Hz
• Supply current :=?20 mA capacitive
• Making capacity:
• 500W (incandescent lamps only)
• 1 A (motors)
• 16 A (resistive loads)
• EMC emission: according to EN 50081-1
• EMC immunity: according to EN 50082-1
• Electrical safety: according to EN 60950
and EN 60065
• Signal sensitivity: 15 mVpp min 50 mVpp
max at 120 kHz
• Input impedance:
=?180W (L - N) at 120 kHz
• Ambient temperature:
- 10° C to + 50° C (operation)
- 20° C to + 70° C (storage)
• Dimensions:
52 x 122 x 33 mm
(width x height x depth without plug)
|
|
Warning
By default the Plug type sent is the Shucko (used in Austria, Bulgaria, Croatia, Finland, Germany, Greece, Hungary, Iceland, Latvia, the Netherlands, Norway, Portugal, Serbia, Slovenia, Spain and Sweden).
If you wish to order another Plug type, when you place your order, please refer the type of plug that you want in the observations field.
The available Plug types are:
- AU - Australian;
- CH - Swiss;
- F - French;
- E - compatible with most types of plugs existent in Europe;
- I - Italian;
- IL - Israelian;
- SA – South African;
- U – United Kingdom ;
|