|
Description
• Replaces any normal switch for X10 control
of lighting (including fluorescent lighting) or
appliances such as heater/fans, etc. rated
up to 10A.
• Works with X10 controller and momentary
action wall switches - including "designer"
wall switches.
• Can also be used like an ordinary switch.
|
|
Features
The X10 wall mounted light switch is a receiver module
that is controlled by any X10 controller.
It can be used like an ordinary switch.
The wall-mounted light switch simply replaces the
normal light switch and is mounted into a flush box.
It can also be controlled by external momentary action
switches connected to terminal 2.
The AW10E responds to STANDARD X10 protocols: "All
units off" from any X10 controller set to its house
code, regardless of unit code. Or alternatively
individual by unit controller using "On" and "Off".
The unit is supplied with cover plate JUNG CD 500
and mounting frame.
|
Technical information
• Supply voltage: 230V +10% -15% 50 Hz
• Power consumption:< 2,5W
• Supply current: = 20 mA capacitive
• Making capacity: 2000W (incandescent
lamps only) 10 A (resistive load)
• EMC emission: according to EN 50081-1
• EMC immunity: according to EN 50082-1
• Electrical safety: according to EN 60950
and EN 60065
• Signal sensitivity:15 mVpp min. 50 mVpp
max. at 120 kHz
• Input impedance: = 180 O (L - N) at 120
kHz
• Connections: screw type terminals for
phase, neutral, switched phase, control
2.
• Ambient temperature:
- 10° C to + 50° C (operation)
- 20° C to + 70° C (storage)
• Available in Schuko form
|