|
Description
The Dimmer plug-in module is a 300W receiver unit that
works as a remote dimmer.
The connected lamp can still be switched on and off locally.
The dimmer function, however, is by an X10 remote
control.
The dimmer module can be used at any wall outlet in the
house with incandescent lamps between 40W and 300W.
As the dimmer is simply inserted into wall outlets like an
ordinary plug, there is no installation necessary. Just
adjust the settings on the front side to the desired device
address (e.g. F9) and note this address down in a list.
The lamp connected to the dimmer module can still be
controlled locally by its own switch, but do not forget to
leave the local switch in the "ON" position, otherwise
the lamp cannot be controlled by an X10 controller. Switch
the lamp off by remote control.
The LM12E responds to STANDARD X10 protocols: "All
lights on" or "All units off" from any X10 controller set to
its house code, regardless of unit code. Or alternatively,
by individual unit control using "On", "Off", "Bright" and
"Dim".
|
|
Features
• On/Off and dimmer control of incandescent
lighting.
• Available in a wide range of plug styles (British,
German, French, Italian, Euro-style, Swiss,
Australian / New Zealand, Danish, Czech etc.).
• Designed to operate with 230 VAC 60W to 300W
incandescent or 12 V halogen lamps.
|
Technical information
• Supply voltage: 230V ±10% 50 Hz
• Supply current : = 20 mA capacitive
• Making capacity: 60 to 300W
(incandescent + 12 V halogen lamps
only)
• Regulating time:
4,4 sec ± 0,2sec from fully on to off
• EMC: EN 50081-1, EN 50082-1,
EN 6100- 3-2, EN 61000-3-3, EN
60555-2
• Electrical safety: according to EN
60950 and EN 60065
• Signal sensitivity: 15 mVpp min 50
mVpp max at 120 kHz
• Input impedance: = 55 Ohms (L - N)
at 120 kHz
• Ambient temperature:
- 10° C to + 50° C (operation)
- 20° C to + 70° C (storage)
• Dimensions:
52 x 122 x 33 mm
(width x height x depth without plug)
|
|
Warning
By default the Plug type sent is the Shucko (used in Austria, Bulgaria, Croatia, Finland, Germany, Greece, Hungary, Iceland, Latvia, the Netherlands, Norway, Portugal, Serbia, Slovenia, Spain and Sweden).
If you wish to order another Plug type, when you place your order, please refer the type of plug that you want in the observations field.
The available Plug types are:
- AU - Australian;
- CH - Swiss;
- F - French;
- G - Shucko;
- E - compatible with most types of plugs existent in Europe;
- I - Italian;
- IL - Israelian;
- SA – South African;
- U – United Kingdom ;
|