|
Description
• Small enough to fit into most lamp fittings
where it is hidden from sight.
• On/Off control of incandescent lighting.
|
|
Features
The Screw-In Lamp Module is a 100W receiver unit.
It works in conjunction with any X10 controller.
There is no installation to be carried out. Just screw
it in the lamp fitting. It will adopt the first address it
receives through the mains as its house and unit code
(There is an EPROM that stores the house and unit
code even when the power is cut).
The lamp concerned can still be controlled locally by
its own switch, but do not forget to leave the local
switch in the "ON" position, otherwise the lamp cannot
be controlled by an X-10 controller. Switch the lamp
off by remote control.
|
|
Applications
• Create "two-way" switching in conjunction
with SS13E
• Convenience with centralized control of
living room table lamps
|
Technical information
• Supply voltage: 230V ±10% 50 Hz
• Supply current : = 20 mA capacitive
• Making capacity: 40 to 100W
(incandescent lamps only)
• EMC : according to EN 50081-1 and EN
50082-1
• Electrical safety: according to EN 60598
• Signal sensitivity:
15 mVpp min 50 mVpp max at 120 kHz
• Input impedance:
= 55 O (L - N) at 120 kHz
• Ambient temperature:
- 10° C to + 50° C (operation)
- 20° C to + 70° C (storage)
|
|
Warning
By default the Plug type sent is the E27 (used in most European countries).
If you wish to order another Plug type, when you place your order, please refer the type of plug that you want in the observations field.
The available Plug types are:
- ES – Screw-in type E27;
- EB – Bayonet (United Kingdom);
|