|
Description
The RF interface is a receiver that converts RF signals originating from the X10 remote control units into X10 commands and subsequently sends them over the lighting circuit.
The RFIX35 makes wireless and remote operation of the X10 system possible. The RF interface can be mounted on a junction box or against a distribution box, but can also be mounted against the rear wall of the meter cabinet, if required. The RFIX35 can also be plugged into a wall socket outlet.
|
|
Features
- Transposes Radio Frequency (RF) signals from remote control devices into X10 commands on the power line;
- Easy to install;
- Possibility to control only one user definable letter code (16 addresses)
-
- Possibility to receive standard RF or "RF-secured" codes;
- A maximum of eight remote control units can be registered in the RF-secured mode;
- Designed as a wall- or ceiling mountable unit or stand-alone use;
|
Technical information
- Mains voltage: 230Vac, 50Hz;
- Max. power consumption: <2W;
- Ambient temperature: 0 to 40 °C;
- Frequency: 433,92 MHz; X-10 RF (NEC) compatible protocol;
- Max communication distance: 100 m (open field);
- Protection class: Class II, Double insulated;
- Type of protection: IP 40 with wall or ceiling installation, IP 20 with installation on the wall;
- Standards: IEC 60950;
- Dimension (H x W x D) 120 x 80 x 30 mm;
- Color RAL9001;
- Power cable Length: 1.5 m;
- Color: White;
|