With this device you can control your IR devices using any X10 controller that you have (remote control, PC interface, security system, etc.).
- When the controller receives a X10 command he sends one IR command using the IR eye.
- The controller responds to 16 X10 programmable addresses, a total of 32 different IR commands can be sent.
- Each address can send 2 different commands.
- Rating Voltage: 230V/50Hz;
- Static State Wastage: < 1W;
- IR Transmit Distance: Up to 3 meter IR emitter cable;
- IR Learning Distance : <5cm;
- IR emitter jack plug : 3.5mm;
- IR Signal Limitation : 38KHz , command length less than 250ms;