The S3160M is a in-wall blind/shutter actuator which allows to control any interior or exterior electric blind or shutter (220 VAC), either locally, using the potential-free inputs, or remotely, using any X-10 compatible controller (a remote control, a switch, a mini-timer or even using a mobile phone).

The S3160M operation is very simple: to fully open a blind simply send the command ON; the OFF command will fully close; to partially open or close the blind you can use the Bright/Dim commands (open/close the blinds while the commands are sent).

This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.
The module is also provided with a built-in filter which removes all electric noise generated from the blind or shutter.

• Allows to control any electric (220VAC) blind or shutter (either for internal or external use);
• Potential free inputs, compatible with electric switches (push buttons are not supported);
• Can be programmed to receive group commands (e.g. All Units Off);
• Can  be programmed to accept until 16 X-10 address (per load);
• Built-in noise filter;
• Compatible with all X-10 devices;
• Higher receiving sensitivity (25mVpp).

This is the ideal product to use if you want to remotely control your electric blinds. For example, when used with the mini-timer, it allows you to program the system to open the shutter on the morning, providing you a soft wake-up with the morning sunlight.