|
Description
The S2267M module allow to control one load, being small enough (43 x 47 x 18,9 mm) to fit behind a wall switch or junction box. It allows to control both internal relay either using any conventional electric switch (push buttons are not supported) or remotely, using any X-10 compatible controller.
This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.
|
|
Features
- Allows to control one load, either locally or remotely, using any compatible X-10 controller;
- Potential free inputs, compatible with electric switches (push buttons are not supported);
- Can be programmed to receive group commands (e.g. All Units Off);
- Can be programmed to accept up to 16 X-10 address (per load);
- Compatible with all X-10 devices;
- Higher receiving sensitivity (25mVpp).
|
Technical information
- Supply voltage: 230V +/- 10% 50Hz;
- Power consumption: <1 W;
- Maximum load: 800W;
- Supported loads: resistive, capacity and inductive;
- Ambient temperature: -10C to +50C;
- Receiving signal sensitivity: 25mVpp;
- Dimensions: 43.25mm x 47mm x 18.9mm;
|