The S3160MH is a in-wall blind/shutter actuator which allows to control any interior or exterior electric blind or shutter (220 VAC), either locally, using the potential-free inputs, or remotely, using any X-10 compatible controller (a remote control, a switch, a mini-timer or even using a mobile phone).

The S3160MH operation is very simple: to fully open a blind simply send the command ON; the OFF command will fully close; to partially open or close the blind you can use the Bright/Dim commands (open/close the blinds while the commands are sent).

This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.
The module is also provided with a built-in filter which removes all electric noise generated from the blind or shutter.

• Indicated to shutters with 220VAC motor.
• Can be controlled remotely through the PC or a controller with phone interface.
• Don’t answer to the commands “All Lights ON/ All Units Off”.
• Answer to extended X10 commands.
• Have the pre-set position function that can be activated manually through a key or X10 commands.
• Local control through push-button.
• Compatible with any X10 controller.
• Easy to install behind any switch.
• Prepared to work with double push-buttons normally open with potential free output.

This is the ideal product to use if you want to remotely control your electric blinds. For example, when used with the mini-timer, it allows you to program the system to open the shutter on the morning, providing you a soft wake-up with the morning sunlight.