|
Description
The PIOX15 is a micro-module that allows you to connect an X10 network with external systems more complex, such as security systems (with inputs / outputs to 12V) or systems of health care.
This module provides 2 potential free inputs and totally separated from the power circuit. Whenever an input changes state is sent a signal to the X10 address programmed.
Are also available 2 transistor outputs (Max current: 25mA), which can be controlled remotely from any X10 controller.
|
|
Features
- 2 potential free inputs that allows the sending of signals X10 ON / OFF (2 addresses)
- Receive 2 X10 signals and controls 2 transistor outputs (normally open, 25mA);
- responds to commands status request (Status Request)
- Increased sensitivity signal reception X10: (25mVpp);
- More power for sending signals X10: 5Vpp.
|
Technical information
- Voltage: 230V + / - 10% 50Hz
- Consumption in Standby: 1 W
- X10 signal sending power: 5V,
- Operating temperature: -10C to +50 ºC,
- Dimensions: 46mm x 46mm x 17mm
- switches or sockets with no ground wire: the box should have at least 40 mm
- socket with a ground: the box should have at least 50 mm.
|