|
Description
O SVX10 is a in-wall signal repeater which amplifies all the X-10 signals received to their maximum value 5V.
It can be easily programmed to amplify all the X-10 messages or only the messages sent on a specific house code.
How does it work?
To increase the signal reliability, all the X-10 messages are sent in duplicate, this means that a command to switch ON a device is sent (A1 A1 AOn AOn). The SVX10 listens to all X-10 messages on the network and retransmit the repeated message with the maximum signal strength.
|
|
Features
- Amplify and repeats all X-10 messages;
- Can be programmed to amplify only the signal from a specific house code;
- Compatible with all X-10 devices;
- Higher receiving sensitivity (25mVpp);
- Higher transmit power (5V).
|
|
Applications
The X-10 signal can be strongly attenuated depending on the installation size and the type of electric devices connected. For example, if you have a X-10 controller connected on the end of an electric circuit (e.g. wall sockets circuit) and you want to control a light (also in the end of the lightning circuit) the X-10 signal can be attenuated, avoiding to be received by the X-10 lamp actuator in the best conditions.
Placing the SVX10 near the distribution box, guarantees that all signal are amplified to their maximum value, assuring that they are received on the best possible conditions.
|
Technical information
- Supply voltage: 230V +/- 10% 50Hz;
- Power consumption: <1 W;
- Receiving signal sensitivity: 25mVpp;
- Transmit power: 5V;
- Ambient temperature: -10C to +50C;
- Dimensions: 46mm x 46mm x 17mm.
Note:
It isn’t advisable to use more than one repeater in a single installation.
|