|
Description
The phase coupler transmits X10 commands that enter from one phase to the other two phases. These commands are repeated when transmitted to all phases.
The FKX40 Phase Coupler/Repeater is a DIN rail module and must be installed in a distribution box.
|
Technical information
- Rated Voltage: 3-phase, 230 VAC, 50 Hz;
- Total power consumption`: < 2 W;
- Signal transmission: >5 Vpp in 5O at 120KHz in accordance with EN 50065-1, EN 50065-2-1, EN 50065-4-1;
- Transmission synchronization:1 pulse burst at 0°/180°;
- Signal sensitivity: 25mVpp…6Vpp at 120KHz ± 4KHz;
- Signal/noise ratio: 1.35 : 1;
- Connection range: 2.5 mm2 solid;
- Minimum ambient temperature: 0 °C;
- Maximum ambient temperature: 40 °C;
- Atmospheric pressure: 86 pkA - 106 pkA;
- Relative humidity (non condensing): 30 - 90%;
- Degree of protection: Housing - IP40 according to IEC 60 529, Terminal contact - IP20 according to IEC 60 529;
- Standards: NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2;
- Housing complies with IEC 60707: BH 2-30, UL94: V-0;
|