|
Description
The Programming and Measuring Interface (PMIX35) is a power line communication interface suitable for X10 and other compatible systems. In addition to supporting the standard and extended protocols of X10, this interface also measures the quality of various signals. With the supplied PMIX35 software, technical problems in installations can be quickly localized and resolved, a new installation can be tested for reliability and modules can be quickly and easily programmed.
|
|
Features
- Sending and receiving commands;
- Measuring the signal level and noise level of incoming messages;
- Measuring network impedance;
- Sending messages with quick-selection buttons;
- Sending messages with two preset macros;
- Running macros automatically;
- Sending messages with adjustable transmission levels;
- Logging of received and sent messages with error analysis;
- Easily accessible network diagnostic information;
- Automatic programming of modules at the touch of a button;
- Network validation measuring method with reporting for the reliable delivery of new installations (available starting from software version 1.1);
- Support for the PMIX35 ASCII protocol similar to the CTX15/35 protocol;
- Support for the CTX15/35 protocol;
|
Technical information
- Rated voltage 230 V, 50 Hz;
- Total power consumption Max. 2.5 W;
- Signal transmission Adjustable from 0 to 5 Vpp (per 25 mV) in 5 O at 120 kHz according to EN 50065-1, EN 50065-2-1, EN 50065-4-1;
- Transmission regulation: Transmission level adjusts itself automatically to the power line impedance;
- The maximum adjustable level is 5Vpp;
- Transmission synchronization 1 pulse burst at 0°/60°/120°;
- Signal sensitivity 25mVpp-6Vpp at 120 kHz ± 4 kHz;
- Signal/noise ratio 1.35:1;
- Minimum ambient temperature 0°C;
- Maximum ambient temperature 40°C;
- Atmospheric pressure 86 pkA - 106 pkA;
- Relative humidity (non condensing) 30 to 90%;
- Standards NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2;
|