|
Features
The PUX Programmer and Controller is able to send and receive both standard X10 commands as well as X10 extended commands. Keypad selections enable selection of transmit signal levels, single or continuous signal transmission, user selection of zero crossing degree shift and display or log the level of noise or signal on the power line on the Liquid Crystal Display (LCD).
|
|
Applications
Programming tool for MicroModules.
Display signal strength on line from other transmitters and two way receivers.
Use to test potential installation sites for possible installation problems.
|
Technical information
Power: 120 to 277 V AC (+/- 10%)
Frequency: 50 Hz
Current draw: 270mA at 240V AC/50Hz
|
|
Warning
For professional use! When installing consult an electrician.
|