|
Description
The signal transmission of high frequency pulses via
the mains network can be affected by active or passive
interferences. When used correctly, this equipment will extensively suppress these interferences.
Typical active interference sources are appliances that
do not conform to the EMC regulations. In addition
there are wireless intercommunication systems which
use mains borne signaling. They transmit high
frequency signals into the mains network.
These disturbances are usually carried into the house
network from outside, e.g. from neighbours or
industrial installations. They are suppressed by the
filter. Remaining interferences
generated within the house network are without
significance as the special dynamic filtering techniques
of the X10 system ensure undisturbed performance.
|
|
Applications
• Installed at the breaker panel/fuse box,
prevents X10 signals from leaving /
entering the home.
|
Technical information
Supply voltage: 230V+10% , 50 /60 Hz
Max load: 45A
Filter range: 120 kHz
Filter bandwidth: 4 kHz min. (3dB)
Forward attenuation: min. 50dB sem corrente
Entry impoedance: 20O_ min. a f=120 kHz
Dimensions: 33 x 80 x 72 mm
Temperature: -10°C to 25°C (at work), -20°C to 70°C (stock)
|
|
Warning
For professional use! When installing consult an electrician.
|