|
Description
The AC-8014 is a 14-channel 868 MHz receiver for TP 8x wireless thermostats . It controls multi-zone heating (also thermoelectric actuating valve-drivers) or cooling systems.
The receiver has a special MODE channel which turns the heating to economy mode. It is designed for heating system control and is not suitable for extending hardwired alarm systems via wireless detectors.
Due to the maximum current limits of the outputs, pulses switching the outputs off for short moments are used (when more then 8 outputs are used). Therefore the AC-8014 should only be used with thermoelectric actuating valve-drivers. It should not be used to control any relays, semiconductor switches etc. LEDs on the receiver’s front cover indicate the status of each output channel.
The AC 8000R built-in power relay module can be used as a pump control. A second AC 8000R module can be plugged-in to provide boiler control. Both relays work with OR logic: they are switched if any of the 1–14 outputs is activated.
|
Technical information
- Power supply: 230 V AC, 50Hz, protection class II;
-
Consumption: 0.02 A stand-by; 0.2 A max. ;
-
Max. power supply load: 1.7A;
-
Internal load-protection: safety fuse F 3.15 A;
-
Max. relay output load: 10 A / 230V;
-
Voltage of outputs 1–14 and COM: 24V DC;
-
Max. load of outputs 1–14: max. 0.4 A per single output and 1.7A total for all outputs;
-
Radio frequency: 868 MHz;
-
Communication range: 100 m (open area);
-
Dimensions: 258 x 214 x 77 mm;
-
Mechanical resistance: IK08 according to EN 50102;
-
Radio characteristics: ETSI EN 300220;
-
EMC: EN 50130-4, EN 55022;
-
Safety: EN 60950;
-
Enclosure: IP30 (EN 60529);
-
Operational temperature: -10 to +40 °C;
-
Can be operated according to ERC REC 70-03;
|