|
Description
The MCT-302 is a fully supervised PowerCode™ magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.
|
Technical information
- Frequency (MHz): 433,92;
- Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse width modulation;
- Overall Message Length: 36 bits;
- Alarm Inputs: 2, one internal and one external, with a separate 24-bit transmitter ID each;
- Auxiliary Input Circuit Type: N.C. / E.O.L., selected with DIP switch E.O.L. Resistor Required: 47 kO;
- Message Repetition: Repetitive transmission (once every 3 minutes) or one-shot, as selected with on-board DIP switch;
- Supervision: Signaling at 60-minute intervals or according to the local standard from the reed switch (if enabled) or from the aux. input (if the reed switch is disabled) ;
- Response to Tamper Event: Tamper report every 3 minutes (until the tamper switch is restored) ;
- Power Source: 3.6 V Lithium battery, size 1/2 AA, Tadiran;
- Battery Life Expectancy: 3 years (for typical use) ;
- Operating Temperature: 0°C to 49°C;
- Dimensions: 81 x 22 x 23.5 mm;
- Weight: MCT-302 (excluding battery): 34g;
- Magnet: 13g;
- Standards: Meets FCC Part 15, MPT1349 and Directive 1999/5/EC;
|