|
Description
The ST814 is a combined Temperature/Humidity Sensor which is designed for both desktop use and wall mountable. The device has a local LCD display which either shows the temperature or the humidity. 4 buttons allow switching between minimum, maximum or actual values, humidity versus temperature and Fahrenheit versus Celsius
The device can report its values via Z-Wave and allows to set trigger level for direct control of other Z-Wave device when the measured value hits the trigger point. This makes the ST814 a very powerful and flexible tool to measure environmental values and control device within a Z-Wave network.
|
|
Features
- Max. & Min. Ranger Hold
-
Digital TN LED Display
-
LED Backlight
-
Built in Beep Tone
-
0°C freeze indication
-
Design for table placing/wall mounting
-
3 x 1.5V AA type battery operation
|
Technical information
- Protocol - Z-Wave
-
Frequency - 868.42MHz (EU) / 908.42MHz (US)
-
Code Type - Learning
-
Transceiver - Yes
-
Operating Range - Up to 100 feet
-
Power - 3x 1.5V AA
-
Operating Temp. - -10°C- 50°C (-14°F~122°F)
-
Z-Wave Certification - ZC08-09080001
|