|
Description
The Window blind control allows to control 24 V DC motors of window blinds. The control is performed with polarity reversal, which makes this device suitable for a wide variety of window blind solutions among others Velux roof windows.
The unit will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.
|
|
Features
The control allows opening and closing windows. After a learning process the control is able to set the window blind to a specific position e.g. half open.
The tiny unit with a size of 98 mm x 53 mm x 23 mm had a weight of only 67 gr. And fits almost everywhere near the window given.
The unit is powered by the 24 V DC as well and consumes only 0.3 W in standby mode. With typical blind motors a 0.6 A power supply should be used.
|
Technical information
- Outputs: 2 wires, 24 V DC with polarity reversal
-
Interaction: 1 button for inclusion, exclusion and association
-
Dimensions: 98mmx53mmx23mm
-
Wireless behaviour: receiver
-
Z-Wave type: slave
-
Power supply: via 24 V DC
-
Distance: up to 100 m outdoor, up to 30 m within buildings
|