Heating, but not as we know it!
Intelligence and design. These are the hallmarks of Netatmo's thermostat for smartphones. Netatmo called upon world-famous French designer Philippe Starck to turn the thermostat into a minimalist, designer object. But that's not all. The true innovation lies in the fact your heating is now connected to the Internet. Your thermostat will schedule your heating to suit your life. What's more, the Netatmo thermostat is equipped with software that takes into consideration your home's specific characteristics and even the outside temperature. Therefore you always have the ideal temperature. Planning on getting home from work earlier today? Forget to turn off the heating before you went away for the weekend? Not a problem! You can access your thermostat from your computer, tablet or smartphone: the choice is yours. The Netatmo app is available for iPhone, Android and Windows Phone*.
Save money too!
The Netatmo thermostat for smartphones will pay for itself in less than one winter**. Think of all the money you’ll save. These incredible results come from four unique features: 1/ Automatic scheduling 2/ Taking into consideration your home's insulation 3/ Taking into consideration the outside temperature (thanks to its Internet connection) 4/ A new “PID” (proportional integral derivative) algorithm to get you as close as possible to your desired temperature. You can save up to 25% on your energy bills.
The Netatmo thermostat for smartphones is as easy to install as A-B-C. Check your heating system compatibility here.
The Netatmo Weather Station contains a unique set of sensors to monitor your living environment's temperature, barometric pressure, humidity, carbon dioxide concentration, noise pollution, and more. The Netatmo App (iOS and Android) displays your Station’s indoor and outdoor measurements into clear and comprehensive dashboards, graphs and notifications.
You can connect up to 3 additional modules to a station..
This device evaluates the quality of the air confined inside your home by measuring its CO2 concentration. When the C02 reaches an excessive level, the Netatmo weather station can send an alert directly to your iPad, iPhone, iPod Touch or Android terminal, so you can act and ventilate the room/house.
Netatmo Rain Gauge has an easy-to-read rainfall display and warns you the moment it starts raining.
Use the Rain Gauge data to determine the best time to water your garden.
Precipitation is measured in terms of periods of rainfall and accumulated rainfall.
Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).
Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.
Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.
The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).
Smoke detection is signaled through siren and LED diode blinking.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.
The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
|ZWFIB FGD-212 - dimmer|
|ZWFIB FGS-213 - ON/OFF 1|
|ZWFIB FGS-223 - ON/OFF 2|
|ZWFIB FGR-223 shutters|
|ZWFIB FGRGBW-442 - RGBW 2|
The KNX module allows the connection between the Zipato system and an KNX installation.
After connecting the module to an KNX network, ZipaBox enables their users to control their KNX devices from a remote way. Likewise allows the control from inside a KNX network devices from other technologies.
ZigBee is a low-cost, low-power, wireless mesh network standard.
The low cost allows the technology to be widely deployed in wireless control and monitoring applications. Low power-usage allows longer life with smaller batteries.
Mesh networking provides high communication reliability and more extensive range. ZigBee expansion module allowes Zipabox to communicate with all ZigBee enabled devices and integrate them into one unified home automation network.
Since majority of smart energy meters supports ZigBee, Zipabox becomes even more interested for consumers, telcos and utilities to integrate smart metering applications within connected home.
433Mhz spectrum range is traditionaly being used by many simple and cost effective wireless devices.
Long range and high reliability makes those products as the perfect choice for the cost effective security and automation applications where two-way communication is not needed. However, there is a wide vairety of different protocols available on the market and making them work all together is impossible withou a sofisticated gateway device.
By using the 433MHz expansion module, Zipabox allowing you to, not just to connect vast majojrity of the popular protocols based on 433Mhz to work together, but also, to connect them all together to work within a same network with Z-wave, Zigbee and KNX devices.
Integrate wired security sensors and accessories into your Zipato control system by adding the Zipato Zipabox Security Module. The module snaps into a Zipato expansion slot to immediately add a variety of wired inputs. Another expansion module can be snapped onto the Security Module.
Monitor the energy consumption of up to four channels with the Zipato Zipabox Power Module. This add-on module snaps into a Zipato expansion slot. Once connected, the Power Module instantaneously measures voltage, current, and power values for each channel and sends real-time data to your Zipato web portal. Using this information, you can then create energy-saving rules in the Zipato Rule Creator.
To perform the measurement is necessary to use the current clamps ZWZIP_AMPCLAMP35(purchased separately).
VERAEDGE: THE “BRAINS” BEHIND YOUR SMART HOME OR BUSINESS!
With VeraEdge you can do anything today’s most advanced smart homes can do. Cutting edge features like geo fencing let the system know when you’re coming home, so your living room is nice and warm (or cool) when you arrive. (Save energy, automatically, when you leave, too!) One easy, intuitive app spans all platforms (Mac/Window/iOS/Android) to easily keep you in control at all times, wherever you go. Controls all the leading brands of locks, thermostats, and other devices so you don’t need to compromise when selecting components. Create a better system, at a fraction of the price tag of the big guys, and with no monthly fees required.