The Smart Switch 6 is an intelligent adapter plug which can be switched by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Switch 6 is more than an ordinary socket. Plug it into any power outlet in your home and that outlet is instantly smarter because lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Save on what you spend.
Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you know.

It does that via the Aeotec LED Ring. 16 million colours of light are used to visually communicate how much electricity is being used.

See what you spend.
Smart Switch 6 doesn’t just visually communicate how much electricity you’re using, it also reports it back to your Z-Wave gateway in real-time. From anywhere in the world you’ll be able to see which devices are turned on and how much that is costing you. Compatible gateways will also help you store and analyse your historical energy consumption. Besides a colored LED ring at the Smart Switch shows the energy consumption of the connected device.

The LED ring can be configured as follows:
• Disabled: The LED ring is switched off permanently
• Bicolored: Blue shows that the connected device is switched on, White shows that it is switched off
• 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device)

The Smart Switch 6 has a dimension of only 60 x 60 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Switch 6 owns an additional USB port alongside.

The Smart Switch 6 is an intelligent adapter plug which can be switched by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Switch 6 is more than an ordinary socket. Plug it into any power outlet in your home and that outlet is instantly smarter because lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Save on what you spend.
Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you know.

It does that via the Aeotec LED Ring. 16 million colours of light are used to visually communicate how much electricity is being used.

See what you spend.
Smart Switch 6 doesn’t just visually communicate how much electricity you’re using, it also reports it back to your Z-Wave gateway in real-time. From anywhere in the world you’ll be able to see which devices are turned on and how much that is costing you. Compatible gateways will also help you store and analyse your historical energy consumption. Besides a colored LED ring at the Smart Switch shows the energy consumption of the connected device.

The LED ring can be configured as follows:
• Disabled: The LED ring is switched off permanently
• Bicolored: Blue shows that the connected device is switched on, White shows that it is switched off
• 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device)

The Smart Switch 6 has a dimension of only 60 x 60 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Switch 6 owns an additional USB port alongside.

With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW116 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

The AEOTEC Nano Dimmer is a flush-mounted radio module which turns a standard light installation into an intelligent smart home component with Z-Wave wireless technology.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls (switch/dim) the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Energy Illuminator Micro is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.

The length of the Aeotec LED Strip (AEOEZW121-2) is not long enough for you to create the perfect room atmosphere? No problem! Thanks to the Aeotec LED Strip Extension 1.2m which is separate available, you can easily extend the main LED Strip. A 6-pin connector makes installation quick and easy.

Paint your home in new light and choose from more than 16 million colors the perfect shade that meets your mood. Your home is no longer decorated with just furniture and and photos – use the power of light. The LED Strip by Aeotec is the first ready-to-use Z-Wave LED Strip for Smart Homes. After mains connection, it can be included to a Z-Wave network. Switch the LED Strip via wireless switch, smartphone or sensor controlled and change the shade of a color anytime from anywhere. The Aeotec LED Strip has separate warm white, cold white and color LEDs which has a higher quality than ordinary LED stripes.Furthermore, the Aeotec LED Strip is not only dedicated to your home four walls, it is also suitable to illuminate your balcony, terrace and garden, because it can be used indoors and outdoors as well.

With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes.
The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb.

• Cold white: 4745K to 7050K;
• Natural white: 3710K to 4745 K;
• Warm white: 2580K to 3710K ;

Well-known manufacturers such as Samsung and Philips also use the same LED technology.
An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors.
Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.

This sensor offers information whether a door or window is open or closed.
The product consists of a magnetic element and the main unit. One of the parts is mounted on the moving part of the window or of the door, the other part is placed on the frame. The installation can be done with screws or double-sided tape.
The sensor is a battery powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus.
Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced.
The unit offers a tampering control and sends an alarm message when tampered.
The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.

No more large pieces of plastic on expensive doors. Door / Window Sensor 6 is small, nearly invisible and paintable. Easily installed the door/window sensor is mounted onto the corner of a door or window using double sided tape. Its custom-made, inbuilt lithium ion battery allows it to have a perfectly small profile measuring only 9 mm.

Door / Window Sensor 6 fills the traditional role of a security and safety sensor, providing a Z-Wave network with crucial door open / door close information in style.

Recessed Door Sensor is a new small and compact Z-Wave sensor with the size of 2.5*7 cm (main body), that tells you and your Z-Wave network if a door is open or closed. It is nearly invisible, as the sensor is installed with the help of a slight drill hole hidden away on the top of your door. Installing Recessed Door Sensor is easy, as you only have to add it to your home’s network activating its battery and associating it with your Z-Wave system.

Z-Wave Aeon Labs Multisensor 6 - Gen5
AEOEZW100
ZW100

Make your home really intelligent. One tiny device packed full of intelligence. A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence. It can detect movement, vibration and measure the temperature, luminosity, air humidity and UV radiation.

With the ceiling mount called "Recessor" you can integrate the Aeotec multi sensor into the ceiling - almost invisible and effective. Analogous to integrated ceiling lamps the sensor disappears almost complete in the ceiling. Simultaneously the detection area for the multi sensor (i.a. motion and light intensity) is enlarged.

Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.

Many people protect their home in different ways with smoke sensors, door locks and secrurity systems. But the dangers which are coursed by water mostly the people underestimate.

With the Water Sensor 6 of Aeotec your are secured of water damages perfectly. The unvinsible sensor detects minuscule amounts of liquids which can be caused by a little leak in the water pipe. An overflooding bath tub or sink doesn't cause hugh damages because the sensor can sends an alert before it is too late.

In combination with other devices in your Z-Wave network you can turn off electrical devices, close water valves or turn on pumps.

By the compact form of the Water Sensor 6 it is possible to place it nearly everywhere you want. Furthermore it contains addionally a vibration sensor which detects tamper and emergency events as well as a temperatur sensor.

With the Water Sensor 6 of Aeotec you are protected against water damages. This device is already greatful but with the Water Sensor Dock it becomes more greatful.

The installation of the dock offers several advantages to you.

Firstly you have got the opportunity to monitor two different areas in a distance of 1m from the water sensor. Connect the two spot sensors to the dock and then you can monitor separate areas. So you enlarge also the level of secrurity.

Secondly you can use the dock as loading station of the water sensor to power it with mains electricity. Connect the provided USB cable to the dock and the Water Sensor 6 does not longer need the batteries.

The siren will warn everybody in the building by a loud sound and a flashing light about an alarm. This product is especially suited for security applications in combination with other Z-Wave devices such as door or windows sensors or motion detectors.

The siren gives a loud sound and a flashing warning light, so everybody in the building will know immediately that an alarm has occurred. The noise level of the siren is > 105 dB in range of 1 meter. The device can be plugged into any typical electrical outlet. During a power failure, the siren can operate with a internal lithium battery.

With the new Z-Wave USB Stick Generation 5 by Aeon Labs your PC, notebook, Barebone, Raspberry Pi etc. change into a central controller of your smart home.

The control of the Z-Wave network is realized via "Z-Wave Serial API" (according to "Z-Wave Application Programmers Guide, INS10247"). It‘s also used by well-known Z-Wave control programs such as IP Symcon, Homeseer etc. This allows you to use the USB stick GEN5 universal with other Z-Wave software solutions. Thanks to the integrated battery, you can also include or exclude any devices in your Z-Wave network by pushing on the local button, when PC or Notebook is turned off.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Aeotec’s new Z-Wave Plus repeater and range extender.

Aeotec’s new repeater and range extender.

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone. Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house.
The main body is anchored using a back mount. The device has three clamps and reports W, kWH, V and A (up to 60 Ampere).

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone.
Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house. The main body is anchored using a back mount which opens to easily. The device reports W and kWH.

The smart Aeotec LED Bulb 6 Multi-White turns your home lights into smart lights. The LED bulb fits into every E27 bulb holder. It can be connected to a Smart Home gateway via Z-Wave wireless technology after being connected to mains power. The required Z-Wave chip is already integrated into the bulb’s housing. You can vary brightness and light color easily via remote control, smartphone or table. Daylight, candle light or a mixed white: As of now you can define light atmosphere according to your wishes and requirements.

Aeotec Nano Dimmer Bypass for use with Aeotec Nano Dimmer has been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.

The smart Aeotec LED Bulb 6 Multi-White turns your home lights into smart lights. The LED bulb fits into every E27 bulb holder. It can be connected to a Smart Home gateway via Z-Wave wireless technology after being connected to mains power. The required Z-Wave chip is already integrated into the bulb’s housing. You can vary brightness and light color easily via remote control, smartphone or table. Daylight, candle light or a mixed white: As of now you can define light atmosphere according to your wishes and requirements.