Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Dual-Tech Motion Sensor (PIR & Microwave) with Pet Immunity

    €39.75 excl tax
    The detector provides an analysis of environmental conditions through the entire movement speed frequency spectrum, allowing focus on intruders and eliminating environmental factors of false alarms. The spectrum analysis is embedded in the VLSI based electronics of the detector assuring high reliability and trouble free operation.
    As the LC-104-PIMW-W is a combined technology (PIR & microwave) an alarm signal relay activation occurs only when signals from both sensors (PIR & MW) are present at the same time. The effective detection range is the range of which the patterns (PIR & MW) are intersected. The GAIN potentiometer adjustment changes the MW signal intensity so that the effective pattern will be scaled.
    SKU: LC-104-PIMW-W




    TechInfo:
    • Detection Method: Quad (Four element) PIR & microwave pulse Doppler;
    • Power Input: 9.6 to 16VDC;
    • Current Draw; Active: 25mA, Standby: 20mA;
    • Temp Compensation: Yes;
    • Alarm Period: 2 ± 1 sec;
    • Alarm Output: NC, 28VDC 0.1 A with 10 Ohm series protection resistors;
    • Tamper Switch: NC 28VDC 0.1 A with 10 Ohm series protection resistors;
    • Warm up Period: 1min;
    • LED Indicator: LED’s are blinking during warm up period and self testing;
    • Red LED: ON during alarm;
    • Green LED: PIR CHANNEL;
    • Yellow LED: MW CHANNEL;
    • RF Immunity: 10 V/m plus 80% AM from 80 MHz to 2GHz;
    • Static Immunity: 8kV contact, 15kV air;
    • Transient Immunity: 2.4kV @ 1.2joules;
    • Operation Temp: -10ºC ~ +55 ºC ;
    • Dimensions: 118mm x 62.5mm x 41mm;








    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent




    TechInfo:
    • Detection Method: Quad (Four element) PIR & microwave pulse Doppler;
    • Power Input: 9.6 to 16VDC;
    • Current Draw; Active: 25mA, Standby: 20mA;
    • Temp Compensation: Yes;
    • Alarm Period: 2 ± 1 sec;
    • Alarm Output: NC, 28VDC 0.1 A with 10 Ohm series protection resistors;
    • Tamper Switch: NC 28VDC 0.1 A with 10 Ohm series protection resistors;
    • Warm up Period: 1min;
    • LED Indicator: LED’s are blinking during warm up period and self testing;
    • Red LED: ON during alarm;
    • Green LED: PIR CHANNEL;
    • Yellow LED: MW CHANNEL;
    • RF Immunity: 10 V/m plus 80% AM from 80 MHz to 2GHz;
    • Static Immunity: 8kV contact, 15kV air;
    • Transient Immunity: 2.4kV @ 1.2joules;
    • Operation Temp: -10ºC ~ +55 ºC ;
    • Dimensions: 118mm x 62.5mm x 41mm;