This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical loads. A 230V powered pattress box is needed for installation. The product consists of:
the insert, which can be used with or without local control
a special mounting plate to mount the insert into a pattress box
a mounting frame for Duwi Everlux series , color standard white
the switching paddle for local control of the dimmer
The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations. It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.
Replace your conventional wall switch and control the connected load (e.g. ceiling light) in future via Z-Wave wireless technology. Of course local control via wall switch is still possible as is usual. Besides local connected loads (from 10W to 300W) the wall insert can also switch other devices within the wireless network via Z-Wave. For this two switch groups are available: Single and double click. Therewith scene activation is also possible.
If the Z-wave.me wall is included into a network controlled by a controller that supports Z-Wave all communication with the controller is secure and it only accepts special secure commands. All data that is sent to the controller is secured as well.
This device is working with a 2-Wire system, so no neutral wire is required for it to work.
Rocker switch and installation frame in design Busch-Jaeger DURO 2000 (Creme White) are part of this set.