Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Fibaro

    Fibaro available on eurox10.com

    View as Grid List
    Sort by
    Display per page

    Home Center 3

    ZWFIB FGHC3
    €699.87 incl tax
    Home Center 3 is the most advanced smart home hub available on the market. It combines the most outstanding and cutting-edge features in terms of hardware technology and UX characteristics. The device has been created in close cooperation with FIBARO users and installers and comes as the result of our ten years smart home experience. Integrate FIBARO with over 2000 third-party products operating in various technologies and easily control different kind of smart appliances such as lighting, roller blinds, HVAC, alarm, surveillance or watering system – everything done with a simple press of a button, gesture or with a word. Everything packed up in an ingenious and refined design.
    Availability: In stock

    Home Center 3 Lite

    ZWFIB HC3L-001
    €170.97 incl tax
    Smart home starts here!

    New wireless communication using the Z-Wave 700 technology
    Efficient hardware architecture
    Designed for smaller automation systems
    Scenes/Macros programming through block scenes and LUA
    Highest data security
    Availability: In stock

    Z-Wave Home Center 2 Gateway

    ZWFIBHOMEC2
    €319.80 incl tax

    Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).

    Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.

    Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.

    Availability: Usually available for shipment within 4-6 business days after ordering.

    6 Pack FIBARO

    PK_DOM_FIB01
    €869.86 incl tax €1087.32 incl tax
    Pack with 6 FIBARO devices:

    1 x HomeCenter3;
    ZWFIB FGHC3
    +
    5 x FIBARO insert modules of your choice
    ZWFIB FGS-214 - Fibaro Smart Module
    ZWFIB FGS-224 - Módulo inteligente dual Fibaro
    ZWFIB FGR-223 – Blind Control Insert
    ZWFIB FGS-213 - Relay Insert
    ZWFIB FGS-223 – Relay Insert 2
    ZWFIB FGD-212 - Dimmer 2 - 250W Universal Insert Module
    ZWfibFGRGBWM441 - RGBW Controller

    Note: In the observation field please define the references and quantities of your choice.

    FIBARO Nice HubPowerbank

    HUBPOWERBANK
    €101.98 incl tax
    The FIBARO Nice HubPowerbank is a mobile 3G/4G (LTE) router with USB power supply. HubPowerbank allows you to connect the Yubii Home or Home Center 3 Lite hubs to a backup power source and if installed a SIM card, to an additional WiFi internet connection.

    Single Switch 2 - Relay Insert 1 channel Switch2 Z-Wave Plus

    ZWFIB FGS-213
    €77.49 incl tax
    FIBARO Single Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: In stock

    Double Switch 2 - Relay Insert 2 * 1.5 KW Z-Wave Plus

    ZWFIB FGS-223
    €77.49 incl tax
    FIBARO Double Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: In stock

    Fibaro Smart Module

    ZWFIB FGS-214
    €77.49 incl tax
    The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off.
    Smart Module (FGS-214) allows to control one device or circuit and the Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.
    Availability: In stock

    Fibaro Double Smart Module

    ZWFIB FGS-224
    €77.49 incl tax
    The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
    The Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.
    Availability: In stock

    Dimmer 2 - 250W Universal Insert Module

    ZWFIB FGD-212
    €77.49 incl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).
    Availability: In stock

    Dimmer Bypass 2

    ZWFIB FGB-002
    €15.99 incl tax

    Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

    Availability: In stock

    Roller shutter 3

    ZWFIB FGR-223
    €77.49 incl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.
    Availability: In stock

    RGBW Controller 2

    ZWFIB FGRGBW-442
    €77.49 incl tax
    FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

    FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

    Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
    Availability: In stock

    Z-Wave Wall Plug w/ metering - F plug (Shucko)

    ZWFIB FGWPF-102-5
    €75.03 incl tax
    Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
    Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: [email protected] ;
    Skype: EuroX10.com
    Availability: In stock

    Walli controller

    ZWFIB FGWCEU-201
    €57.81 incl tax
    The FIBARO Walli Controller is a part of FIBARO Walli line of smart devices. The smart wall-mounted Z-Wave remote controller can activate scenes or control various types of Z-Wave devices, e.g. switches, dimmers, roller shutters. A Pre-set configurations allow to easily adjust operation for specific type of controlled devices
    Availability: In stock

    Walli Switch

    ZWFIB FGWDSEU-221
    €76.26 incl tax
    An intelligent switch integrated with the button used in a system with one or two independently controlled loads. Designed for quick installation in sockets. Equipped with a LED ring and functionalities known from Fibaro modules.
    Availability: In stock

    Walli Dimmer

    ZWFIB FGWDEU-111
    €76.26 incl tax
    Intelligent lighting dimmer with integrated light switch. Works with commercially available lighting source such as: LED diodes, compact lamps, traditional bulbs and halogen lamps. The device is equipped with automatic calibration functions and active power and energy measurement.
    Availability: In stock

    Walli Roller Shutter

    ZWFIB FGWREU-111
    €76.26 incl tax
    Intelligent roller blinds controller that allows you to manage the gate, roller blinds, blinds and scenes with a single click.
    Availability: In stock

    walli Smart Outlet type F

    ZWFIB FGWOF-011
    €76.26 incl tax
    An intelligent electrical outlet that allows to control and manage the device connected to it. Equipped with a LED ring, informing about current consumption. The maximum load is 3680W.
    Availability: In stock

    walli conventional outlet

    FGWSONF-011
    €23.37 incl tax
    An conventional electrical outlet that matches the design of the smart Walli outlets and switches.
    Availability: In stock

    Walli N USB Outlet

    ZWFIB FGWU-021
    €39.36 incl tax
    Socket with a double USB charger with a 2400mA charging current (total).
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Walli N TV-SAT Outlet

    ZWFIB FGWTFEU-021
    €39.36 incl tax
    High quality tool-free TV-SAT socket with 2 SAT connectors and 1 TV connector.
    Availability: In stock

    Walli N Ethernet Outlet

    ZWFIB FGWEEU-021
    €29.52 incl tax
    Double Ethernet socket equipped with 2 RJ45 cat.6 sockets.
    Availability: In stock

    Double cover plate for Walli devices

    ZWFIB FG-Wx-PP-0003
    €6.15 incl tax
    Double cover plate for Walli devices.
    Availability: In stock

    Triple cover plate for Walli devices

    ZWFIB FG-Wx-PP-0004
    €7.38 incl tax
    Triple cover plate for Walli devices.
    Availability: In stock

    Single cover plate

    FG-Wx-PP-0001
    €4.92 incl tax
    Single cover plate

    Fibaro Intercom

    ZWFIB FGIC-002
    €822.87 incl tax
    The FIBARO Intercom is a smart/intelligent, elegant and multifunctional solution for those of you who always want to know who is at the door and what is going on around the house. The device allows you to take calls from the visitors not only when you are at home, but also when you are out. One screen - with an ultra-wide view of 180 degrees - lets you see a detailed preview of all the devices installed in the house and around it.

    The FIBARO Intercom also allows the visitors to leave video messages, when we cannot talk to them - it will be recorded in high, Full HD, resolution, onto a memory card. The device also has night mode, which is activated automatically right after dark and allows you to clearly see, who the unexpected night guests are.

    The FIBARO Intercom is also infallible if you forget the keys to our apartment. It will allow you to open the door using the app, by bringing the bluetooth-equipped phone closer to the device or by entering a predefined PIN code.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Swipe

    ZWFIB FGGC-001
    €195.57 incl tax
    FIBARO Swipe (FGGC-001) is a revolutionary, battery-powered gesture control pad that allows you to control devices through the Z-Wave network. Swipe your hand up, down, left or right in front of the pad, make circular gestures and use sequences of gestures to get full and intuitive control of your smart home.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Fibaro Keyfob

    ZWFIB FGKF-601
    €63.96 incl tax
    FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.

    Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.

    Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.

    Built-in locking system will ensure that unauthorized person will not take control of your home.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Fibaro Button

    ZWFIB FGPB-101-x
    €63.96 incl tax
    FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device that allows you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In Panic Button mode, each press of the button results in triggering the Fibaro Alarm.
    With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.

    FIBARO Smart Implant

    ZWFIB FGBS-222
    €57.81 incl tax
    This small device allows you to control the door of your garage or heating system, as a smart complement to your alarm system or simply to make all devices smart in your home. As an additional development of the Universal binary Sensor, the FIBARO Smart Implant controls the connected device, can be used for scene control, has a temperature sensor and is compatible with binary sensors. In addition to controlling the devices (ON / OFF), the device reads the sensor data and amplifies the existing Z-Wave network.
    Availability: In stock

    Fibaro Motion Sensor Z-Wave Plus

    ZWFIB FGMS-001 ZW5
    €75.03 incl tax
    The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: [email protected] ;
    Skype: EuroX10.com
    Availability: In stock

    Flood Sensor Z-Wave Plus

    ZWFIB FGFS-101 ZW5
    €77.49 incl tax

    The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

    The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

    The Sensor will work on 12 or 24 VDC or battery.

    Availability: In stock

    Z-Wave Plus Smoke sensor 2

    ZWFIB FGSD-002
    €84.87 incl tax

    The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).

    Smoke detection is signaled through siren and LED diode blinking.

    The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.

    The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

    Availability: In stock

    Z-Wave Plus CO Sensor

    ZWFIB FGCD-001
    €129.15 incl tax
    The FIBARO CO sensor will make your home safer and prevents danger caused from the ‘silent killer’ carbon monoxide (CO). The sensor detects reliable carbon monoxide in the air and alarms in case of exceeded limits. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.

    The device alarms via an integrated siren and blinking LED. Additionally, automatic scenes can be triggered within the Z-Wave gateway and notifications can be sent.

    Additionally the device is equipped with a temperature sensor.

    The FIBARO CO Sensor is a life-saving device, therefore tests to conform compliance with the applicable requirements of the standard EN 50291-1:2010 are conducted by the BSI Group accredited testing laboratory.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Door/Window Sensor 2

    ZWFIB FGDW-002-x
    From €63.96 incl tax
    FIBARO Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices.

    Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet.

    In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.

    Radiator Thermostat Starter Pack

    ZWFIB FGT-START
    €116.85 incl tax
    Fibaro Thermostatic Head is an intelligent thermostatic head, which controls the temperature in the room, using the in-built or external sensor and regulating the heat level automatically, according to your individual preferences. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via app to easily manage temperature throughout the week. With additional Fibaro Radiator Thermostat Temperature Sensor it is even more precise in adjusting the right temperature in your home.
    Availability: In stock

    Fibaro Thermostat for Radiator Valves

    ZWFIB FGT-001
    €103.32 incl tax
    FIBARO Radiator Thermostat is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via app to easily manage temperature throughout the week.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    Fibaro Radiator Thermostat Sensor

    ZWFIB FGBRS-001
    €24.60 incl tax
    The Fibaro Radiator Thermostat Temperature Sensor is a wireless temperature sensor which can be used with Fibaro Radiator Thermostat to provide best temperature regulation. It can be placed anywhere in the room and the device will use it as a reference point for the room temperature. One head can be paired with only one sensor, but one sensor can be paired with three heads.
    Availability: In stock

    10 pack Walli Switch

    PK10 FGWDSEU-221
    €682.65 incl tax
    10 units of the same reference

    An intelligent switch integrated with the button used in a system with one or two independently controlled loads. Designed for quick installation in sockets. Equipped with a LED ring and functionalities known from Fibaro modules.

    10 pack Walli Dimmer

    PK10 FGWDEU-111
    €682.65 incl tax
    10 units of the same reference

    Intelligent lighting dimmer with integrated light switch. Works with commercially available lighting source such as: LED diodes, compact lamps, traditional bulbs and halogen lamps. The device is equipped with automatic calibration functions and active power and energy measurement.

    10 Pack walli Outlet type F

    PK10 FGWOF-011
    €682.65 incl tax
    An intelligent electrical outlet that allows to control and manage the device connected to it. Equipped with a LED ring, informing about current consumption. The maximum load is 3680W.

    10 pack Walli Roller Shutter

    PK10 FGWREU-111
    €682.65 incl tax
    Intelligent roller blinds controller that allows you to manage the gate, roller blinds, blinds and scenes with a single click.

    1-Wire digital

    DS18B20
    €6.76 incl tax
    1-Wire digital thermometer to be used with ZWfibFGBS-001 from Fibaro. Also compatible with other equipments using 1-wire technology.

    Adapter DIN for Fibaro micromodules, with buttons

    Eufix
    From €33.95 incl tax
    This adapter DIN is designed to mount the Fibaro dimmer micromodules or, as it were, in FGD-212 model micromodules with push-buttons. The dimensions of the adapter are appropriate for a standard DIN TH35 type rail. The base board contains a set of screw terminals, where all the wires can be safely connected.

    Adapter DIN for Fibaro Micromodules, without buttons

    D212NP
    From €33.90 incl tax
    This adapter DIN is designed to mount the Fibaro dimmer micromodules or, as it were, in FGD-212 model micromodules without push-buttons. The dimensions of the adapter are appropriate for a standard DIN TH35 type rail. The base board contains a set of screw terminals, where all the wires can be safely connected.

    Extendable Module Box

    CMEB
    €14.90 incl tax
    Din rail enclosure that can be used to mount Fibaro modules on DIN rails.
    Availability: 17 in stock

    Expander for Extendable Module Box

    CMEB/E
    €13.67 incl tax
    Expander for CMEB box.
    It fits on the side of the CMEB and it makes it 17,5mm wider and adds 8 terminals.
    Availability: 7 in stock

    DIN rail base for relays

    WE 869393
    €6.25 incl tax
    Din rail base for WE 405xxx relays with screw connections.

    RCL424730 230VAC 2CO 8A Relay

    WE 405863
    €10.79 incl tax
    230V AC relay with two 250V AC 8A outputs.

    RCL424012 12VDC 2CO 8A Relay

    WE 405856
    €4.30 incl tax
    12V DC relay with two 230V AC 8A outputs.

    RCL 214730 230VAC 1CO Relay

    WE 86933
    €8.06 incl tax
    230V AC relay with one 250V AC 12A output.

    Netatmo Weather Station

    NWS01-EC
    €189.99 incl tax

    The Netatmo Weather Station contains a unique set of sensors to monitor your living environment's temperature, barometric pressure, humidity, carbon dioxide concentration, noise pollution, and more. The Netatmo App (iOS and Android) displays your Station’s indoor and outdoor measurements into clear and comprehensive dashboards, graphs and notifications.

    Availability: Usually available for shipment within 1-2 business days after ordering.

    Additional indoor module for the Netatmo Weather Station

    NIM01-WW
    €69.99 incl tax

    You can connect up to 3 additional modules to a station..

    This device evaluates the quality of the air confined inside your home by measuring its CO2 concentration. When the C02 reaches an excessive level, the Netatmo weather station can send an alert directly to your iPad, iPhone, iPod Touch or Android terminal, so you can act and ventilate the room/house.

    Availability: Usually available for shipment within 1-2 business days after ordering.

    Netatmo Wind Gauge

    NWA01-WW
    €109.99 incl tax
    The Wind Gauge measures the wind’s speed and direction.It uses the latest in ultrasound technology to produce extremely accurate measurements. The Wind Gauge only operates with the Netatmo Weather Station, sold separately. You can only add 1 Wind Gauge for each Netatmo Weather Station.

    Netatmo Rain Gauge

    NRG01-WW
    €79.99 incl tax

    Netatmo Rain Gauge has an easy-to-read rainfall display and warns you the moment it starts raining.

    Use the Rain Gauge data to determine the best time to water your garden.

    Precipitation is measured in terms of periods of rainfall and accumulated rainfall.

    Mount for Wind Gauge or Rain Gauge

    NWM-01-WW
    €29.99 incl tax
    The Netatmo mount makes it easier to attach your Rain / Wind Gauge to a wall, roof, pole or railing.
    Standard camera mount thread: 1/4-20 UNC bolt.

    logitech harmony hub + command companion

    REMOTE.HUB
    €307.50 incl tax
    Harmony companion, IR Hub to control all your media devices.

    Integration with Z-Wave hubs: Home Center 3
    Home Center 3 Lite
    VERA edge
    Vera Plus
    Vera Secure
    Smartthings

    Compatilbe with Alexa, Google Home, Philips HUE Hub, and any IR (infra-red) controllable device.
    Availability: Usually available for shipment within 1-2 business days after ordering.

    Fibaro

    Close
    Filter by Clear All
    Min: €4.00 Max: €870.00
    4 870