Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Fibaro

    Fibaro full range of smart home products available on eurox10

    View as Grid List
    Sort by
    Display per page

    Z-Wave Home Center 2 Gateway

    €486.99 excl tax

    Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).

    Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.

    Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.

    FIBARO Home Center 2 (Black Edition)

    €486.99 excl tax
    Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).
    Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.
    Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.

    Home Center Lite

    €227.63 excl tax
    Fibaro Home Center Lite is a consumer electronics device used for home automation. This small sized (90x90x33 mm) gateway communicates and manages up to 230 devices wirelessly using Z-Wave.

    The new Home Center Lite controller allows for even greater integration of home multimedia with the Fibaro System (in case multimedia devices are compatible with the system). Manage your TV, home cinema, Hi-Fi and others by the FIBARO App. Play with scenes and associations, change channels and adjust volume. Using Fibaro, you don’t need any other remote than your smart phone or tablet.

    Thanks to the built in power management functionality, you can monitor the current energy consumption and the power consumption history while being able to spot the devices consuming the most of it. Detailed statistics are presented as clear charts, helping you compare numbers and estimate upcoming bills.

    The Home Center Lite is equipped with a mighty, incredibly energy efficient Cortex A8 processor (720MHz).

    Compared to the Fibaro Home Center 2 the Home Center Light supports no VoIP, no voice control and no scripting language for advanced scene control.

    Relay Insert 1 channel Switch2 Z-Wave Plus

    From €40.64 excl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Relay Insert 2 x 1.5KW

    €48.77 excl tax
    FIBARO Double Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control two independent devices drawing up to 1500W each. As with all other Actors, FIBARO Double Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    From €40.64 excl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Dimmer 2 - 250W Universal Insert Module

    From €40.64 excl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

    Dimmer Bypass 2

    €9.75 excl tax

    Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

    Roller shutter 3

    From €40.64 excl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

    RGBW Controller 2

    From €40.64 excl tax
    FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

    FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

    Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.

    Z-Wave Wall Plug w/ metering - F plug (Shucko)

    €52.84 excl tax
    Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
    Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: info@eurox10.com ;
    Skype: EuroX10.com

    Z-Wave Wall Plug w/ metering - E plug (French))

    €52.84 excl tax
    Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
    Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: info@eurox10.com ;
    Skype: EuroX10.com

    Fibaro Intercom

    €723.57 excl tax
    The FIBARO Intercom is a smart/intelligent, elegant and multifunctional solution for those of you who always want to know who is at the door and what is going on around the house. The device allows you to take calls from the visitors not only when you are at home, but also when you are out. One screen - with an ultra-wide view of 180 degrees - lets you see a detailed preview of all the devices installed in the house and around it.

    The FIBARO Intercom also allows the visitors to leave video messages, when we cannot talk to them - it will be recorded in high, Full HD, resolution, onto a memory card. The device also has night mode, which is activated automatically right after dark and allows you to clearly see, who the unexpected night guests are.

    The FIBARO Intercom is also infallible if you forget the keys to our apartment. It will allow you to open the door using the app, by bringing the bluetooth-equipped phone closer to the device or by entering a predefined PIN code.

    Swipe

    €138.13 excl tax
    FIBARO Swipe (FGGC-001) is a revolutionary, battery-powered gesture control pad that allows you to control devices through the Z-Wave network. Swipe your hand up, down, left or right in front of the pad, make circular gestures and use sequences of gestures to get full and intuitive control of your smart home.

    Fibaro Keyfob

    €40.64 excl tax
    FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.

    Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.

    Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.

    Built-in locking system will ensure that unauthorized person will not take control of your home.

    Fibaro Button

    From €40.64 excl tax
    FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device that allows you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In Panic Button mode, each press of the button results in triggering the Fibaro Alarm.
    With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.

    Fibaro Motion Sensor Z-Wave Plus

    €48.77 excl tax
    The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: info@eurox10.com ;
    Skype: EuroX10.com

    Flood Sensor Z-Wave Plus

    €48.77 excl tax

    The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

    The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

    The Sensor will work on 12 or 24 VDC or battery.

    Z-Wave Plus Smoke sensor

    €52.84 excl tax

    The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).

    Smoke detection is signaled through siren and LED diode blinking.

    The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.

    The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

    Z-Wave Plus CO Sensor

    €81.29 excl tax
    The FIBARO CO sensor will make your home safer and prevents danger caused from the ‘silent killer’ carbon monoxide (CO). The sensor detects reliable carbon monoxide in the air and alarms in case of exceeded limits. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.

    The device alarms via an integrated siren and blinking LED. Additionally, automatic scenes can be triggered within the Z-Wave gateway and notifications can be sent.

    Additionally the device is equipped with a temperature sensor.

    The FIBARO CO Sensor is a life-saving device, therefore tests to conform compliance with the applicable requirements of the standard EN 50291-1:2010 are conducted by the BSI Group accredited testing laboratory.

    Door/Window Sensor 2

    From €40.30 excl tax
    FIBARO Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices.

    Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet.

    In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.

    Z-Wave Universal Binary Sensor

    €32.51 excl tax
    The Universal Binary Sensor is a wireless module that makes it possible to improve the functionality of any sensor with a binary output by allowing it to communicate with the wireless network Z-WAVE and the FIBARO building intelligence system. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. The device can service up to two binary sensors and up to four DS18B20 temperature sensors.
    The Sensor was designed for installation in the housing of a sensor or another device, the functionality of which we wish to improve. The Universal Binary Sensor may be used whenever wireless collection of data from sensors is required. Once additional safety housing have been installed, the Sensor can also be used in areas with high humidity and high temperature. The Sensor’s main function is the integration of the wireless FIBARO system with the existing wire-based and wireless alarm and measurement systems. As an element of the safety system the device is transparent for parametric alarm lines.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: info@eurox10.com ;
    Skype: EuroX10.com

    Fibaro Thermostat for Radiator Valves

    €65.03 excl tax
    FIBARO Radiator Thermostat is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via app to easily manage temperature throughout the week.

    Fibaro Radiator Thermostat Sensor

    €16.25 excl tax
    The Fibaro Radiator Thermostat Temperature Sensor is a wireless temperature sensor which can be used with Fibaro Radiator Thermostat to provide best temperature regulation. It can be placed anywhere in the room and the device will use it as a reference point for the room temperature. One head can be paired with only one sensor, but one sensor can be paired with three heads.

    Radiator Thermostat Starter Pack

    €73.16 excl tax
    Fibaro Thermostatic Head is an intelligent thermostatic head, which controls the temperature in the room, using the in-built or external sensor and regulating the heat level automatically, according to your individual preferences. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via app to easily manage temperature throughout the week. With additional Fibaro Radiator Thermostat Temperature Sensor it is even more precise in adjusting the right temperature in your home.

    Fibaro Starter Kit

    €398.37 excl tax
    Step into the great world of home automation. You don’t know how to start? No worries – Fibaro has prepared a starter kit with a selection of components. Start with 5 devices plus the “Home Center Lite” control center and create a variety of automation function.
    . If the motion sensor detects motion, a lamp, plugged to the switchable socket, is switched on.
    Connect window sensor, home center and the smart plug and switch the light off automatically when the window is open.
    The smoke sensor will warn with an acoustical signal as well as push notification to your smartphone when smoke or arising fire is detected.
    The flood sensor will warn with acoustic signal and push notification, too, when water outlet is detected.
    There are a variety of additional functions, automations and scenarios realizable with the components of the Fibaro starter kit: Find it out!

    6 Pack FIBARO

    €609.02 excl tax €730.85 excl tax
    Pack with 6 FIBARO devices:

    1 x HomeCenter2;
    ZWfibHOMEC2
    +
    5 x FIBARO insert modules of your choice
    ZWFIB FGR-223 – Blind Control Insert
    ZWFIB FGS-213 - Relay Insert
    ZWFIB FGS-223 – Relay Insert 2
    ZWFIB FGD-212 - Dimmer 2 - 250W Universal Insert Module
    ZWfibFGRGBWM441 - RGBW Controller

    Note: In the observation field please define the references and quantities of your choice.

    Pack with HomeCenter Lite and 5 FIBARO modules

    €400.76 excl tax €471.49 excl tax
    1 x HomeCenter Lite FIBARO;
    ZWfibHCLite
    +
    5 x FIBARO insert modules of your choice:
    ZWFIB FGR-223– Roller shutter 3
    ZWFIB FGS-213 - Single Switch 2
    ZWFIB FGS-223 double switch 2
    ZWFIB FGD-212 - Dimmer 2
    ZWfibFGRGBWM441 - RGBW Controller

    Note: In the observation field please define the references and quantities of your choice.

    5 Pack FIBARO

    €203.21 excl tax €243.76 excl tax
    5 x FIBARO insert modules of your choice
    ZWFIB FGR-223– Roller shutter 3
    ZWFIB FGS-213 - Relay Insert
    ZWFIB FGS-223 – Relay Insert 2
    ZWFIB FGD-212 - Dimmer 2 - 250W Universal Insert Module
    ZWfibFGRGBWM441 - RGBW Controller

    Note: In the shopping cart below, the references of the micromodules that you can add to the pack and their quantities will be available. The total number of references must be a multiple of 5 according to the number of packs you added to the cart.

    you can also use the following links for possible packet references:
    ZWFIB FGD-212 ZWFIB FGD-212 - dimmer
    ZWFIB FGS-213 ZWFIB FGS-213 - ON/OFF 1
     ZWFIB FGS-223  ZWFIB FGS-223 - ON/OFF 2
     ZWFIB FGR-223 ZWFIB FGR-223 shutters
     ZWfibFGRGBWM441 - RGBW ZWfibFGRGBWM441 - RGBW

     

    Set of 5 Fibaro Magnetic Sensors

    €181.35 excl tax €201.50 excl tax
    5 x door-window sensor from FIBARO of your choice:
    ZWFIB FGK-101 | Z-Wave door-window sensor white
    ZWFIB FGK-102 | Z-Wave door-window sensor grey
    ZWFIB FGK-103 | Z-Wave door-window sensor black
    ZWFIB FGK-104 | Z-Wave door-window sensor light grey
    ZWFIB FGK-105 | Z-Wave door-window sensor light brown
    ZWFIB FGK-106 | Z-Wave door-window sensor brown
    ZWFIB FGK-107 | Z-Wave door-window sensor dark brown>


    Note: In the observation field please define the references and quantities of your choice.

    Pack with HomeCenter Lite and 3 FIBARO wall plugs

    €347.53 excl tax €386.14 excl tax
    1 x HomeCenter Lite FIBARO;
    ZWfibHCLite
    +
    3 x plugs from FIBARO of your choice:
    ZWfibWPF– Z-Wave Wall Plug w/ metering - F plug (Shucko)
    ZWfibWPE– Z-Wave Wall Plug w/ metering - E plug (French)


    Note: In the observation field please define the references and quantities of your choice.

    Set of 3 Fibaro Wall Plugs

    €140.24 excl tax €158.51 excl tax
    3 x Wall Plugs from FIBARO of your choice:
    ZWfibWPF– Z-Wave Wall Plug w/ metering - F plug (Shucko)
    ZWfibWPE– Z-Wave Wall Plug w/ metering - E plug (French)


    Note: In the observation field please define the references and quantities of your choice.

    1-Wire digital

    €4.00 excl tax
    1-Wire digital thermometer to be used with ZWfibFGBS-001 from Fibaro. Also compatible with other equipments using 1-wire technology.

    Adapter DIN for Fibaro micromodules, with buttons

    From €27.60 excl tax
    This adapter DIN is designed to mount the Fibaro dimmer micromodules or, as it were, in FGD-212 model micromodules with push-buttons. The dimensions of the adapter are appropriate for a standard DIN TH35 type rail. The base board contains a set of screw terminals, where all the wires can be safely connected.

    Adapter DIN for Fibaro Micromodules, without buttons

    From €21.40 excl tax
    This adapter DIN is designed to mount the Fibaro dimmer micromodules or, as it were, in FGD-212 model micromodules without push-buttons. The dimensions of the adapter are appropriate for a standard DIN TH35 type rail. The base board contains a set of screw terminals, where all the wires can be safely connected.

    DIN rail base for relays

    €5.08 excl tax
    Din rail base for WE 405xxx relays with screw connections.

    RCL424730 230VAC 2CO 8A Relay

    €6.77 excl tax
    230V AC relay with two 250V AC 8A outputs.

    RCL424012 12VDC 2CO 8A Relay

    €3.50 excl tax
    12V DC relay with two 230V AC 8A outputs.

    RCL 214730 230VAC 1CO Relay

    €6.55 excl tax
    230V AC relay with one 250V AC 12A output.

    Double cover plate for Walli devices

    €4.02 excl tax
    Double cover plate for Walli devices.

    Mounting Frame Legrand

    Call for pricing
    Mounting frame for device installation with selected Legrande fronts.

    Mounting Frame Schneider

    Call for pricing
    Mounting frame for device installation with selected Schneider fronts.

    Switch Button Adapter Gira

    Call for pricing
    Button adapter for selected Gira fronts.

    Triple cover plate for Walli devices

    €4.84 excl tax
    Triple cover plate for Walli devices.

    Walli N TV-SAT Outlet

    €28.41 excl tax
    High quality tool-free TV-SAT socket with 2 SAT connectors and 1 TV connector.

    walli Outlet type E

    €73.13 excl tax
    An intelligent electrical outlet that allows to control and manage the device connected to it. Equipped with a LED ring, informing about current consumption. The maximum load is 3680W.

    walli Outlet type F

    €73.13 excl tax
    An intelligent electrical outlet that allows to control and manage the device connected to it. Equipped with a LED ring, informing about current consumption. The maximum load is 3680W.

    Walli Roller Shutter

    €73.13 excl tax
    Intelligent roller blinds controller that allows you to manage the gate, roller blinds, blinds and scenes with a single click.

    Walli Switch

    €73.13 excl tax
    An intelligent switch integrated with the button used in a system with one or two independently controlled loads. Designed for quick installation in sockets. Equipped with a LED ring and functionalities known from Fibaro modules.

    Walli Dimmer

    €73.13 excl tax
    Intelligent lighting dimmer with integrated light switch. Works with commercially available lighting source such as: LED diodes, compact lamps, traditional bulbs and halogen lamps. The device is equipped with automatic calibration functions and active power and energy measurement.

    Walli N Ethernet Outlet

    €20.28 excl tax
    Double Ethernet socket equipped with 2 RJ45 cat.6 sockets.

    Walli N USB Outlet

    €28.41 excl tax
    Socket with a double USB charger with a 2400mA charging current (total).

    FIBARO Smart Implant

    €36.57 excl tax
    This small device allows you to control the door of your garage or heating system, as a smart complement to your alarm system or simply to make all devices smart in your home. As an additional development of the Universal binary Sensor, the FIBARO Smart Implant controls the connected device, can be used for scene control, has a temperature sensor and is compatible with binary sensors. In addition to controlling the devices (ON / OFF), the device reads the sensor data and amplifies the existing Z-Wave network.

    FIBARO CO Sensor HomeKit

    €66.98 excl tax
    FIBARO CO Sensor is a HomeKit-enabled carbon monoxide detector using Bluetooth® low energy wireless technology. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning. Alarm is signalled with a built-in siren, blinking LED indicator and by sending information to your iOS device. Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.

    FIBARO The Button Homekit

    €39.02 excl tax
    FIBARO Button is a HomeKit-enabled, compact, battery-powered wireless controller using Bluetooth® low energy technology.
    It allows you to control HomeKit accessories using Automations.
    Various actions may be triggered with one clicks, two clicks or by holding the button down.
    With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.

    Door/Window Sensor HomeKit white

    €40.32 excl tax
    FIBARO Door/Window Sensor is a HomeKit-enabled contact sensor using Bluetooth® low energy wireless technology. Along with detecting opening and closing, the accessory measures the ambient temperature. Opening is detected by separating the sensor’s body and the magnet. Tampering is detected whenever the accessory is detached from the surface or casing is opened.

    FIBARO Wallplug Homekit

    €45.52 excl tax
    FIBARO Wall Plug is a HomeKit-enabled smart plug using Wi-Fi® connection and Bluetooth® low energy wireless technology.
    This remotely controlled outlet adapter is equipped with power and energy metering function.
    It uses a LED ring to visualize current consumption and status.
    The Wall Plug may be operated using the button on the casing or via an iOS mobile app.

    Flood Sensor HomeKit

    €46.82 excl tax
    FIBARO Flood Sensor is a HomeKit-enabled water detector using Bluetooth® low energy wireless technology. The accessory alarms about flooding, whenever water is detected between its probes. Along with detecting flooding, the accessory measures the ambient temperature. Tampering is detected whenever the accessory is moved or casing is opened.

    Relay Switch HomeKit

    €40.32 excl tax
    FIBARO Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Single Switch allows to control connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.