Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: X10

    Pack 3 Two load appliance in-wall module

    €86.70 excl tax

    The S2268M module allow to control two individual loads, being small enough to fit behind a wall switch or junction box. It allows to control both internal relay either using any conventional electric switch (push buttons are not supported) or remotely, using any X-10 compatible controller.

    This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.

    SKU: PK3_S2268M
    Features:
    • Allows to control 2 individual loads either locally or remotely, using any compatible X-10 controller;
    • Potential free inputs, compatible with electric switches (push buttons are not supported);
    • Can be programmed to receive group commands (e.g. All Units Off);
    • Can  be programmed to accept until 16 X-10 address (per load);
    • Compatible with all X-10 devices;
    • Higher receiving sensitivity (25mVpp).


    TechInfo:
    • Supply voltage: 230V +/- 10% 50Hz;
    • Power consumption: <1 W;
    • Maximum load (by output):
      • Resistive loads: up to 8A;
      • Indutive loads: up to 1.5A;
      • Electric Transformer: up to 5A;
    • Ambient temperature: -10C to +50C;
    • Receiving signal sensitivity: 25mVpp;
    • Dimensions: 47mm x 51mm x 21mm;








    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent
    Features:
    • Allows to control 2 individual loads either locally or remotely, using any compatible X-10 controller;
    • Potential free inputs, compatible with electric switches (push buttons are not supported);
    • Can be programmed to receive group commands (e.g. All Units Off);
    • Can  be programmed to accept until 16 X-10 address (per load);
    • Compatible with all X-10 devices;
    • Higher receiving sensitivity (25mVpp).


    TechInfo:
    • Supply voltage: 230V +/- 10% 50Hz;
    • Power consumption: <1 W;
    • Maximum load (by output):
      • Resistive loads: up to 8A;
      • Indutive loads: up to 1.5A;
      • Electric Transformer: up to 5A;
    • Ambient temperature: -10C to +50C;
    • Receiving signal sensitivity: 25mVpp;
    • Dimensions: 47mm x 51mm x 21mm;