Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    PoPP

    PoPP full range of smart home products available on eurox10

    View as Grid List
    Sort by
    Display per page

    POPP 433 Bridge - white

    ZWPOPP POP_700700
    €40.64 excl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.
    Availability: 1 in stock

    POPP 433 Bridge - black

    ZWPOPP POP_700717
    €40.64 excl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.
    Availability: 1 in stock

    Flow Stop gas/water shut-off controller

    ZWPOPE009501
    €89.99 excl tax

    Overflowing bathtubs, leaking washing machines or defects to gas and water pipelines – damages can occur almost anywhere and cause immense costs. The POPP Flow Stop can prevent this – thanks to Z-Wave. Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave technology. This means it is particularly suitable for use in smart homes.

    Even installation is child’s play. The POPP Flow Stop is delivered completely including valve control/motor, power supply, mounting and Quick Start Guide and is easy to assembly on the existing ball stop valve. In doing so, all usual pipe standards, including ½ ” and ¾“, are possible. On this occasion no pipes must be dismantled or even water must be drained. That way the installation is normally done in 5-10 minutes.

    The POPP Flow Stop is driven by a motor and closes the ball valve mechanically. Even though the Motor requires only 12 Volt (1A), it has a high power output as well as high torque, which reliably closes the ball valve in just 10 seconds. Also a manual closing of valve is easily possible in case of power failure – thanks to the clutch release bearing.

    Once the Flow Stop is added to a smart home gateway via Z-Wave, the stop valve can be operated via any PC, notebook, smartphone or tablet. Additionally, in the event of leaking gas or water the smart home gateway – when combined with sensors – is able to stop a further inflow automatically and thus protects against more extensive damage and further danger.

    The POPP Flow Stop is a good piece of security for the intelligent home defending from nasty surprises and high costs due to gas and water damages.

    Availability: 2 in stock

    POPP Z-Rain

    ZWPOPE700168
    €65.03 excl tax

    You want to be informed when it starts raining and your windows are still opened? Or you want to control your garden watering intelligently and you want to note the rainfall as well? The POPP Z-Rain enables this in your Z-Wave Smart Home.

    The Z-Rain has an internal rocker, where the rainwater is collected until the weight of the water tilts the rocker. The tilting will be registered from a reed sensor and counted as well. Based on that the rainfall will then be calculated.

    With the first tilt of the rocker and therefore right to the beginning of the rain you will receive the first value from the Z-Rain. Then you can get a push-message or E-Mail, if one of your windows is still opened and your awning will close automatically.

    The great advantage of the Z-Rain is, that it not only detects rain but also measures the exact amount of rain. A small little shower is not always a reason to close your side windows. You can also configure the value of rain, when you want to be informed about the rain. During a rain fall the Z-Rain reports the amount of rain every 1024 seconds in m3 (total sum of the rainfall), mm per m2 and mm/h (current strength of the rainfall) to the Smart Home Gateway. When the rainfall stops, the last measured value will be sent to the gateway. Afterwards the value will become nil again. With that you can turn off your garden watering with the beginning of a rainfall and turn on the next watering cycle based on the measurements of the last rainfall.

    Thanks to Z-Wave and the operation with two standard AAA batteries the Z-Rain can be placed anywhere in your garden. Because of the integrated battery booster technology, the Z-Rain could possibly have lifetime of up to 5 years depending on the wake-Up interval.

    Popp mains adapter

    ZWPOPE004100
    €16.25 excl tax
    This optional available power supply allows external powering (220 V) of your Popp Smoke Sensor (ZWPOPE004001).
    Plug the terminal in the connection jack on the backside of the device and then connect red wire with plus pole of your Popp mains adapter and the blue one with minus pole. Now you can plug the Load- and the neutralwire into your Popp mains adapter and the device is ready to use. Nevertheless please do not remove the battery.

    Smoke Detector with Siren (battery for 10 Years)

    ZWPOP E009402
    €73.13 excl tax

    The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping. Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.

    Thank to its integrated 10-year battery the smoke detector can be used for legally prescribed lifecycle without replacing the main battery. The Z-Wave module‘s battery can be replaced with just a few simple steps when the device informs the control center about low battery status. Low Z-Wave module battery has no influence to the smoke sensors functionality.

    This device is the first smoke sensor with Z-Wave which has the Q-label (Vds 3131) for extended quality.

    Beyond these functions the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.

    Battery powered wireless wall controller

    ZWPOPE700861
    €41.50 excl tax
    With this battery wall controller you can control your smart home from everywhere in the room, because the flat switch can be positioned on and removed from every planar surface without laying or pay attention cables. Switch the lights, the heating and window blinds with only one touch of a button. Using the wall controller is as simple as using an ordinary light switch – but with significantly more functions.
    The device could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the wireless wall controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the battery wall controller as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by the controller directly.
    Once one device is added to the wall controller it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the battery wall controller to an existing Z-Wave smart home network. Therewith you have the possibility to trigger defined scenes such as the closing of the shutters with simultaneous switching on all lights in the room by only one touch of a button. Or place the wall controller next to your entrance door and start the scenario All of when youre leaving home to switch off al lights and electrical devices you do not need during absence with only one touch of a button.

    Z-Weather

    ZWPOP 005206
    €162.52 excl tax

    Z-Weather is the world’s first energy-automated Z-Wave sensor.

    The multifunctional sensor is powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measures to the Z-Wave Controller even during the night. The built in energy manager automatically calculates and sets the wake up interval between 5 minutes (on sunny days) and 1 – 2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continous operation for reporting gusting wind, storm or dusk in case of emergency.

    KEYFOB-C mini 4 Button Remote Control

    ZWPOPE009204
    €29.41 excl tax
    You want to be in control of your smart home? With the KFOB-C remote control you can switch the lights, the heating and window blinds with only one touch of a button. Using the KFOB-C remote control is as simple as using your car key remote control – and it is equally small and compact and suits to your key ring. Furthermore the robust sliding cover prevents involuntary touches of the buttons.
    The KFOB-C remote control could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the KFOB Controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the KFOB as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by KFOB-C directly.
    Once one device is added to KFOB remote control it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the KFOB-C to an existing Z-Wave smart home network. Therewith you have the possibility to trigger predefined scenes such as the opening of the garage door with simultaneous switching of all lights in your garden by only one touch of a button. Or start the scenario “Good night” which switches off al lights and electrical devices in your house with only one touch of a button when you go to bed.
    Availability: 4 in stock

    POPP KeyPad

    ZWPOPE700045
    €145.53 excl tax
    The Keypad is the first Z-Wave enabled and outdoor Keypad in the Smart Home world!
    The Keypad can activate and deactivate your security system by using an individual Pin Code. Furthermore you can unlock connected doorlocks without a key but with a multi-digit Code.
    As soon as somebody logs in with his personal Pin Code you will be informed automatically. Because of that you even know while your on the road, when your kids arrived at home. Beside the Keypad does not need a key, which are often lost by kids.

    The POPP Keypad can save up to 20 different Pin Codes. Each Code can have 4-10 digits. Every single Pincode has its own scene ID and can start other scenes. Meanwhile you can also us the different scenes IDs to see, who and when one of the residents came home. Additionally the Keypad has an separated doorbell button, which controls his own scene. That way you can switch on a light and turn down the volume of your hifi system when somebody rings the door.

    The Keypad is protected against tamper and burglar the Keypad has an integrated magnetic sensor. If the Keypad is move unauthorized, you receive a push message (gateway mode) immediately or a siren will be triggered. In addition a separted scene ID is used, when a wrong Pin Code is entered. As a result you know directly when somebody use the keypad unauthorized. An integrated multicolor LED shows, if the Pin Code was entered correctly and informs if the entered Code was transmitted successfully.

    Stand alone and Gateway mode
    The Keypad can be used in 2 different modes. Firstly it can be use in connection to a doorlock or dooropener in the Stand-Alone mode. For that you do not need a Z-Wave gateway because the Keypad is directly associated with the door opener.
    Secondly the Keypad can be used in the Gateway mode. For that the keypad is connected to the Gateway and is shown as a scene controller. Each access code gets his own scene ID. The doorbell button and the wrong entering of code will be shown with own scene IDs.
    Availability: 1 in stock

    POPP Keypad + ABUS HomeTec Pro Z-Wave

    ZWUE700045S
    €234.96 excl tax
    POPP Keypad + ABUS HomeTec Pro – the innovative door opener for your smart home

    The POPP Keypad in combination with the ABUS HomeTec Pro Z-Wave provides its owner more comfort, control and flexibility. With the pluggable Z-Wave door lock drive, apartments or front doors can be smartly opened and locked.

    Never worry about forgotten keys anymore. Never lock yourself out again. With the Keypad each of your family members gets an own access code.

    The installation of both products is comfortable and easy. It only requires a door cylinder with emergency function, which has a projection of 7 to 12 mm on the inside of the door. Both devices are battery powered. They can be installed with a few simple steps without any wiring.

    This article contains 2 products: ZWABU CFA3010S + ZWPOPE700045