Living connect® LC-13 is a Z-Wave controlled electronic radiator thermostat with a new firmware. It is controlled by either a Z-Wave compatible Controller or a central device called Danfoss LinkTM CC. The Danfoss LinkTM CC can also control hydronic and electrical floor heating and on/off switches in a building. living connect® uses Z-Wave wireless communication technology, is easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.
Living connect® is battery powered, compact and very easy to operate with only three buttons on the front.
Additionally the temperature can be set wirelessly to a certain set point. The device has a scheduler inside that allows to set up to 9 different set point for each day of a 7 day week. This means that energy saving is even achieved when the controlling device is offline or not working. Local buttons can always overwrite the scheduled setting. living connect® features an open-window function, which closes the valve if the temperature in the room is falling dramatically.
The ZWSEC_SCP318 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.
Control your devices through your smartphone, wherever you are. With NEO, You can turn on or off your electronic devices anywhere. Your smartphone while connected to your Wi-Fi network or mobile internet (3G/4G), turns itself into a remote control for your home.
This module allows the shutter control to 500W. You can control locally through the switch, or wireless via a command or wireless switch. The module can be used for the control of blinds or even lighting.
The UP200-GSM is an intercom unit which as a cell phone can call the owner’s mobile or landline phone. By pressing the call button on the intercom, it makes the voice connection in a few seconds, just like when talking via a conventional intercom system. This way it makes possible for the owner to receive the visitor’s calls and talk to them at anytime and anywhere, even when not at home. The unit does not need internal handset, any special installation or complicated wiring, it needs power only and an active SIM card.
The UP200-GSM is an intercom unit which as a cell phone can call the owner’s mobile or landline phone. By pressing one of the two call buttons on the intercom, it makes the voice connection in a few seconds, just like when talking via a conventional intercom system. This way it makes possible for the owner to receive the visitor’s calls and talk to them at anytime and anywhere, even when not at home. The unit does not need internal handset, any special installation or complicated wiring, it needs power only and an active SIM card.
Connects to your traditional active speakers or external amplifiers
Connects to active speakers, AudioCast will turn your traditional audio system into a wireless one, which allows you to control the wireless audio system in much more convenient way. Easy setup
AudioCast doesnot require technical or wireless expertise. Connect the AudioCast to active speakers in the room where you want to play music, connect to your home WiFi network with the AudioCast App, which provide simple on-screen prompts and voice prompts. With several steps, you will be playing music in few minutes...
This powerful stereo amplifier can turn any pair of speakers to a wireless HiFi multiroom audio system, play your favorite music from a range of streaming services as well as your smartphone, tablet, flash drivers and NAS...