Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Qubino

    Qubino full range of smart home products available on eurox10

    View as Grid List
    Sort by
    Display per page

    Qubino RGB/RGBW Dimmer

    €59.89 incl tax
    The Qubino RGBW Dimmer module controls RGB/RGBW LED stripes and bulbs and lets them shine in various colors. Therewith, you present your home in the right light. Beside 16 million selectable colors, you can use 5 already pre-defined scene effects (Ocean, Lightning, Rainbow, Snow and Sun).

    The device is placed in a wall box right behind a RGB/GRBW switch. The switch is no longer directly connected to the light but acts as an input device for the Qubino module that is controlling the light. The Qubino RGBW Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

    Thanks to Z-Wave, you can control your light conveniently via smartphone and tablet-pc as well as automatically through intelligent sensors and time schedules. Therewith, you create not only good mood atmosphere, but also use colored light within safety scenes for optical alarms or presence simulation.

    Flush Dimmer Z-Wave

    €59.90 incl tax

    This module is used for dimming the light or to manage the speed of a fan.

    Big range of bulb types
    The first (MOSFET switching) dimmer module which also supports control of low voltage halogen lamps with electronic transformer, dimmable compact fluorescent light and dimmable LED bulbs. Qubino Flush dimmer supports also the classical incandescent lights, halogen lamps operated by 230 VAC (High Voltage Halogen), dimmable fluorescent lights and dimmable LED lights.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush Dimmer 0-10V

    €59.90 incl tax
    Smarthome lighting & LED dimmer. Universal dimmer module with a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.

    Flush Dimmer 0-10V is a unique Z-Wave Plus product and truly one of a kind. It was researched and developed based on the end users and DIY (Do It Yourself) enthusiasts who were desperately looking for a Z-Wave solution with 0-10V input/output. A perfect LED dimmer.
    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    DIN Dimmer Z-Wave Plus

    €69.90 incl tax
    This Z-Wave module is used for dimming the bulb or to manage the speed of a fan. The module can be controlled either through a Z-Wave network or through the wall switch.
    The module is designed to be mounted inside an electrical cabinet onto DIN rail.

    Module measures power consumption of bulb or fan and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.
    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush 2 Relays Z-Wave Plus

    €59.90 incl tax

    This module is used for switching On or Off 2 electrical devices like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush Shutter Z-Wave Plus

    €59.90 incl tax

    Este módulo se utiliza para controlar el motor de persianas, rodillos, cortinas, persianas venecianas, ventanas, etc.

    New functionality - support venetian blind slats tilting


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush Shutter DC Z-Wave Plus

    €59.90 incl tax

    Flush shutter DC module with inverting power polarity is used to control the 12-24VDC motor of blinds, rollers, shades, venetian blinds, windows, etc.

    New functionality - support venetian blind slats tilting


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush 1 Relay Z-Wave Plus

    €59.90 incl tax

    This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush 1 Relay Potencial Free

    €59.90 incl tax

    This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

    With this module can feed your load with the desired voltage because it has a separate entrance for this purpose.
    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush PWM Thermostat Z-Wave Plus

    €65.90 incl tax

    Discrete Z-Wave Flush PWM thermostat allows you to control radiant floor or radiators with PWM valves.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush Thermostat for Fan Coil

    €65.90 incl tax

    Discrete Z-Wave Flush heat & cool thermostat allows you to control 4 pipes fan coil or cooling beam with your smartphone.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Flush On/Off Thermostat Z-Wave Plus

    €65.90 incl tax

    The Z-Wave module can be used to directly control an electrical or water floor heating system, electric water heater, hot water pump, electrical radiator, etc.

    Incredible sensor temperature range
    Temperature sensor measures temperature from -50.0°C to +125.0°C, with a 0.1°C resolution.

    No batteries required – Connect direct to any heating device
    As it is connected directly to either 230VAC or 24VDC, no batteries are required.

    Hidden thermostat - clean walls
    There is no need to have big room thermostat on the wall, because the temperature set point is set through a Z-Wave network.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    5 Pack QUBINO

    €299.50 incl tax €368.40 incl tax
    5 x QUBINO insert modules of your choice:
    ZWGOA ZMNHDD1 – Flush Dimmer Z-Wave Plus
    ZWGOA ZMNHBD1 -Flush 2 Relays Z-Wave Plus
    ZWGOA ZMNHAD1– Flush 1 Relay Z-Wave Plus
    ZWGOA ZMNHCD1 - Flush Shutter Z-Wave Plus

    Note: In the observation field please define the references and quantities of your choice.

    Smart Meter

    €119.90 incl tax

    This Z-Wave module is used for energy measurements in single-phase electrical power network till 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.

    The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.

    It is designed to be mounted on DIN rail.


    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies

    Qubino three-phase smart meter

    €169.90 incl tax
    The Qubino three-phase smart meter can be used in many automation scenarios that make your life more comfortable. Smart Meter is an extremely versatile and powerful instrument for measuring energy in a three-phase power network up to 65A. A built-in microprocessor calculates the power, reactive power and power factor with the measured values. The smart meter is designed to be mounted on a DIN channel. The Qubino Smart Meter can be used in residential, industrial and commercial facilities. This equipment permanently measures the current and voltage in a three-phase network. Calculate the current and total power, the PHI power factor and the reactive energy that is actually consumed. The control through Z-Wave allows to act the relays (available separately), as well as to evaluate the results of the measurements of the device. With the energy data we can carry out the most varied actions, such as being alerted if the consumption exceeds a certain limit, sliding loads to keep the consumption below a certain level, etc.

    Contactor

    €29.90 incl tax
    to work with ZWGOA ZMNHTD1 Smart Meter
    wired connection
    Voltage: 230V ± 10%, 50-60Hz
    Current: 32A, 2 pole

    Bistable Switch

    €79.90 incl tax
    to work with ZWGOA ZMNHTD1 Smart Meter
    Infra-red connection
    Voltage: 230V ± 10%, 50-60Hz
    Current: 32A, 4 pole

    Wall Mounted Casing

    €5.90 incl tax

    Temperature sensor can be installed inside this Wall mounted casing. The dimensions of the Wall mounted casing are 71mm x 71mm x 27mm. This casings are made from ABS material and are available in white colour.

    2M Casing Set

    €6.49 incl tax
    Temperature sensor can be installed behind this 2M casing SET. It is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 x cover plate1, 2 x 1M perforated blank cover and 1 x mounting frame 2M with claws. 2M casing SET is made of PC/ABS material and comes in 2M dimensions. 2M casing set is available in polar white colour.

    Temperature Sensor

    €14.80 incl tax

    Digital Temperature sensor has 1m cable with connector to connect directly to the different modules. The digital temperature sensor range is between -50°C and +125°C.

    Extendable Module Box

    €14.90 incl tax
    Din rail enclosure that can be used to mount Fibaro modules on DIN rails.

    Expander for Extendable Module Box

    €13.67 incl tax
    Expander for CMEB box.
    It fits on the side of the CMEB and it makes it 17,5mm wider and adds 8 terminals.

    Mini Dimmer Z-Wave

    €59.90 incl tax