The RC-88 is designed to be a remote control for setting/unsetting (arming/disarming) an alarm system, triggering panic alarms or remotely controlling other appliances. The battery-powered wireless button communicates via OASIS radio protocol.
It is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises. The JA-85ST detector uses wireless communication and it is powered with three AA batteries. The detector indicates a fire hazard using the built-in LED indicator and acoustic signalling. The JA-85ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to large dust particles which are present in dense smoke. It is less sensitive to smaller particles generated by the combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector which has a slower reaction but is much better at detecting fire which generates only a small amount of smoke.
The JA-82KRG is a configuration of the JA-82K control panel with the JA-82R 868MHz RF communications module and the JA-80Y GSM comunicator. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.