The PC-01 access card is a proximity card (RFID standard EM UNIQUE 125kHz). Up to 50 cards can be used in the system. For higher security each card can be combined with a digital code (PIN). It is possible to print your artwork on the card (using some computer printers).
The JA-86P is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect human body movement inside buildings. Detection in two zones makes this detector more immune to moving pets. The battery-powered detector communicates via OASIS radio protocol.
The JA-82KRX is a configuration of the JA-82K control panel with the JA-82R 868MHz RF communications module and the JA-80X PSTN comunicator. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.
Jablotron JA-8X and JA-6X series control panels can be connected to a computer via the JA-80T interface cable. Connect the control panel’s external digital bus connector to the JA-80T interface input using a cable with suitable RJ connectors. Then plug the JA-80T’s USB plug into a free USB port on your PC. The correct drivers must be installed in to the computer to use the JA-80T. Once installed you can start using ComLink software - using this software the user/installer can easily program, operate, and test the system, read the latest events and much more.
The JA-80G detects mixtures of air and combustible gases or fumes (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different reactions. The mains-powered detector indicates a gas leakage optically, and acoustically, and transmits alarm wirelessly via Oasis protocol.