The MCT-237 is a 6-button miniature wireless 2-way keyfob with an icon-based LCD display designed for arming and disarming the security system, as well as for emergency signaling, query for status and home automation applications. It provides instant visual and auditory feedback regarding the system status and whether a command has been successfully executed, so that users can always be certain that the system has carried out their command. Unique to the PowerMaxPro and PowerMaxComplete security and control systems, the MCT-237 offers the ultimate in ease and performance by integrating an LCD screen in a 2-way keyfob. When activated, each button initiates a CodeSecure™ transmission of a unique 28-bit ID command, which is selected from over 100 million possible combinations. To prevent "code grabbing" by potential intruders trying to defeat the security system, the next time the button is activated, the transmitter sends out a different CodeSecure™ ID selected by a proprietary code encryption algorithm and recognized only by the target receiver.It is powered by a standard, easily replaceable alkaline battery and features visible and transmitted low battery indications.
The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI™) and unique pet identification software algorithm, the Next+ K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).
The MCT-211 is a PowerCode™ miniature waterproof wrist-worn transmitter, designed for personal emergency signaling and other applications where the transmitter needs to be within easy reach at all times. The transmitter is waterproof and suitable for wearing even in a shower or in other wet environments such as factories, hospitals, gardens, pools and rain conditions. Attractive ergonomic design makes the MCT-211 as convenient to wear on a regular basis as any wristwatch.
The detector indicates fire hazards using the built-in LED indicator and alarm outputs ALARM and TAMPER. These outputs must be connected to control panels complying with EN 50131-3. The SD-282 ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light and is very sensitive to dust particles which are present in smoke. There is also a built-in heat detector for detecting fire which generates heat quickly with a small amount of smoke. The microprocessor performs digital analysis for a high false-alarm immunity.
The MCT-241 is a PowerCodeTM miniature, microprocessorcontrolled personal UHF transmitter. It is designed to transmit coded alert signal in distress or in other emergency situations. The transmitter is waterproof and suitable for wearing in a shower. The transmitter is activated by depressing the recessed oval pushbutton at the center of the unit. A built-in timer determines the transmission time to 3 seconds, even if the user maintains the transmission button depressed shorter or longer than that. When triggered, the transmitter transmits a unique, factory programmed, randomly selected 24-bit digital alarm code. This code is selected from 16 million possible codes and is therefore unique and virtually impossible to reproduce. Operating power is obtained from an internal 3V Lithium battery. A red LED (see Fig. 1) lights steadily during the transmission, giving reassurance to the user and indicating that the battery condition is good. If the LED flashes each time the transmitter is activated, it indicates that the battery voltage is low and must be replaced as soon as possible. The transmitter case is sealed (no screws) to enable the waterproof feature. Therefore, battery replacement can only be done in the factory. If the transmitter is activated while the battery voltage is low, a ‘low battery’ alarm code is transmitted. If the transmitter is not activated for a long period, the battery is self-tested every 12 hours. After three consecutive “low battery” states, a supervisory ‘low battery’ alarm code is transmitted. The transmitter is supplied with two wearing accessories, a neck cord (to be worn around the neck) and a clip (to be attached to the user belt or shirt pocket). The neck cord includes a built-in safety release mechanism. This neck cord must never be replaced with a cord that does not include a safety release.
RS-232 PC programming kit for Visonsic’s Powermax/Powermaster 30 panels. When used with the USBtoRS232 interface and the Mios app "Visonic PowerMax Alarm Panel Plugin", it allows the Vera gateways users to control their Visonic alarm systems.
Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode™ technology is compatible with the PowerMax® wireless family and other Visonic PowerCode™ wireless receivers. Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm. Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR™ algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.