The MCT-441 are fully supervised indoor, easy-to-install, PowerCode Gas detectors. The MCT-441 is a natural gas detector designed to send an alarm when Methane gas is detected. The detectors can be used in a house, apartment, caravan, mobile home or yacht. The detectors are powered by 220 VAC. An internal Lithium battery is used for AC power failure reporting only (the battery does not power the detector). The detector can send the following messages to the alarm system control panel: Gas alarm, gas sensor failure , AC power failure and low battery voltage. The MCT-441 is designed for wall mounting and should be placed in a location where gas presence, for example leakage, is probable. Upon gas detection, an audible buzzer is sounded and the built-in transmitter transmits a digital message, composed of the detector's PowerCode ID followed by status messages. Alarm and other data are thus forwarded to the alarm system. A periodic supervision message is transmitted automatically (see specifications) to inform the alarm system at regular intervals, of the unit’s active participation in the system. The MCT-441 has a 24-bit ID code, randomly selected in the factory from over 16 million possible combinations. This code is therefore unique and virtually impossible to reproduce. Compatible PowerCode receivers are designed to "learn" specific IDs and respond only to them.
The Next Duo is a Dual Technology Digital Detector designed to prevent false alarms due to interferences in residential and light commercial environments. A passive infrared (PIR) sensor and a complementary active microwave sensor are combined in a single unit, giving Next Duo an unprecedented capacity to distinguish between the motion of a human body and any other disturbance.
The MCT-550 is a fully supervised wireless flood detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods. In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset.
MCR-308 is a superheterodyne receiver designed to convert a standard hard-wired control panel into a reliable fully supervised wireless system. It provides a cost-effective opportunity to realize all the benefits of Visonic wireless systems and devices.
MCR-308 is compatible with all Visonic PowerCode™ and CodeSecure™ devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-308 has 4 zones, each accommodating up to 4 transmitter devices. It is easily expanded using up to three MCX-8 zone expanders, for a total of 28 zones and 112 wireless devices in a single system. Dry contact outputs can be provided, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs.
MCR-308 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control applications. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features that professionals require, including four additional outputs for low battery reporting, tamper protection, RF signal jamming and transmitter inactivity indication.
When used with CodeSecure devices, the MCR-308 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.
This highly reliable and versatile receiver is available in several optional frequencies in compliance with European, U.S. and other international standards, and is approved for use by local authorities in most countries.
TOWER®-20AM MCW is a ground-breaking anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes, and free-roaming animals, while still providing reliable detection of real threats. TOWER-20AM MCW features the revolutionary Octa-Quad™ technology, which uses eight PIR sensors (compared to only one used in other outdoor detectors), with each sensor acting as a Quad detector, to accurately determine whether an alarm is justified. In addition, further increasing its reliability, TOWER-20AM MCW also has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation to provide exceptionally high resistance to vandalism and masking.
MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs*, remote commander and PowerCode motion detectors. It receives alarm, status and control messages from the wireless devices, and sends these messages to the control panel.
For maximum security, the MCX-610 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.
Other important benefits of the MCX-610 include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.
The TOWER 40 is a microprocessor-controlled wireless digital PIR detector, designed for easy installation, free of vertical adjustment. It features parabolic and cylindrical mirrors with uniform detection sensitivity throughout its operating range, up to 18 meters (59 ft), with creep zone protection. The advanced True Motion Recognition™ algorithm (patented) allows the TOWER 40 to distinguish between true motion of an intruder and any other disturbances which may cause false alarms. An on-board motion event jumper determines whether 1 or 2 consecutive motion events trigger an alarm.
The MCR-304 superheterodyne receiver is designed for easy and cost-effective upgrading, enabling hard-wired control panels to operate with wireless remote devices. Compatible with all Visonic PowerCode™ and CodeSecure™ devices, the MCR-304 receiver supports up to 10 wireless devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-304 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control systems and gate openers for garage and parking lots. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features professionals require, including low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication. When used with CodeSecure™ devices, the MCR-304 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.