Ajax outdoor PIR photodetector
868MHz Jeweller Wireless
Dual PIR / 3 to 15 detection m
Antimasking / Pet immunity
Weatherproof IP55

Outdoor photo detector with image request
868MHz Jeweller Wireless
Privacy manager / Detection of 3 to 15 m
Antimasking / Pet immunity
Weatherproof IP55

Wireless outdoor bidirectional curtain motion detector
Protecting property boundaries

DualCurtain Outdoor controls your property perimeter without creating obstacles for people who are already inside. Two independent optical systems with narrow viewing sectors and flexible settings allow you to accurately adjust 30 meters of the detection zone, excluding possible sources of false alarms. The ELSA (Extended Live Signal Analysis) unique software reacts to intruders, screening out triggers like natural interferences and pets.

AJAX MotionProtect Outdoor detects people before they enter your home. With a range of up to 15 meters at an angle of 90 degrees and a sensitivity adjustable in 3 positions, this detector is perfect for outdoor use. Dogs and cats can just run loose in the garden and only people who don’t have anything to look for will be detected. This detector can be mounted anywhere in the garden, or on your driveway, thanks to its wireless range of 1800 meters from the Hub.

Hood for MotionProtect Outdoor protects sensors of the anti-masking system from rain and snow

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.
Glass-breaking detector via two-way radio with built-in temperature sensor. Detection 9m; 1 cable entry. CR123A lithium battery power supply; Grade 2

From the new Ajax Superior range, this small wireless detector notifies the user when glass is being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.
Glass-breaking detector via two-way radio with built-in temperature sensor. Detection 9m; 1 cable entry. CR123A lithium battery power supply; Grade 2

Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

FireProtect 2 RB H (Heat)
High temperature detector
and rapid temperature increase
868MHz Jeweller Wireless
Siren 85 dB built-in
Certified EN 14604
Power 2 batteries CR123A

FireProtect 2 RB (Heat/Smoke) Heat and smoke detector with replaceable batteries

Accuracy through steam, dust, and time
FireProtect 2 is a next-gen detector designed for residential fire safety. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Thought-out design, mounting, and in-app settings make installation straightforward and quick. Everything meets the most modern fire safety standards.

FireProtect 2 RB (Heat/CO) Wireless fire detector with heat and CO sensors with Replaceable batteries

FireProtect 2 is a next-gen detector designed for residential fire safety.

FireProtect 2 RB (Heat/Smoke/CO) Wireless fire detector with heat, smoke, and CO sensors with Replaceable batteries

Accuracy through steam, dust, and time
FireProtect 2 is a next-gen detector designed for residential fire safety. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Thought-out design, mounting, and in-app settings make installation straightforward and quick. Everything meets the most modern fire safety standards.

Wireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools.

Temperature, humidity and CO2 monitor
Wireless 868 MHz Jeweler
Communication range up to 1700 meters
LED indication of air quality
Integrated accelerometer against sabotage
Graphs in the app (coming soon)

Wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders.

Wireless outdoor siren that notifies of danger using sound and light. The device is installed outside the room to raise an alarm for everyone to hear.

Wireless touch keypad is used for arming/disarming of Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.

Wireless touch keypad supporting encrypted contactless cards and key fobs

Wireless touch keypad is used for arming/disarming of Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.

Keyboard with IPS touch screen and RFID reader Total or group arming/disarming Automation scenario control Authentication: codes, RFID reader, or Bluetooth Power supply with 6 AA batteries of 1.5 V or 12VDC Grade 2 certified

Encrypted contactless key fob for keypad PLUS

Encrypted contactless card for keypad PLUS

Un mando para controlar los modos de seguridad. Cuenta con un botón de pánico para enviar alarmas a su círculo interno y una compañía de seguridad en caso de problemas.

Compatible with AJ-LIGHTCORE-1G
Compatible with AJ-LIGHTCORE-2W
LED backlighting
Contactless touch panel
Available in several colours

Touch panel for double light switch
Compatibility with AJ-LIGHTCORE-2G
contactless operation LED backlight

Compatible with AJ-LIGHTCORE-1G
Compatible with AJ-LIGHTCORE-2W
LED backlighting
Contactless touch panel
Available in several colours

Touch panel for double light switch
Compatibility with AJ-LIGHTCORE-2G
contactless operation LED backlight

Touch panel for single light switch
Compatible with AJ-LIGHTCORE-1G
Compatible with AJ-LIGHTCORE-2W
LED backlighting
Contactless central touch panel

Touch panel for double light switch
Compatibility with AJ-LIGHTCORE-2G
contactless operation LED backlight

Compatible with 2 x AJ-SIDEBUTTON

Compatible with 2 x AJ-SIDEBUTTON
Compatible with 1 x AJ-CENTERBUTTON

Compatible with 2 x AJ-SIDEBUTTON
Compatible with 2 x AJ-CENTERBUTTON

Relay for single intelligent light switch
868MHz Jeweller Wireless
Communication range up to 1100 m
Power supply 230 V AC 50 Hz
No need for neutral wire

868MHz Jeweller Wireless
Communication range to 1100 m
Power supply 230 V AC 50 Hz
No need for neutral wire

Relay for a 2-way switch
868MHz Jeweller Wireless
Communication range up to 1100 m
Power supply 230 V AC 50 Hz
No need for neutral wire

The AJAX Socket is a smart power plug for full control of your devices. The Socket can help prevent damage in the event of power surges, but it is mainly used to save energy and automate standard tasks. The Socket simply plugs between your current plug and your wall socket, and then you are able to use the Ajax App. thousands of miles from home to turn on your lights, manage devices, monitor power consumption, etcetera. Especially for hot water boilers this is very interesting. If you forgot to remove the plug of the boiler after departure, that’s no longer a problem. Curious how much power a certain device costs? With this Socket you can read it exactly. Also ideal when renting out houses, you can track exactly how much electricity your guests use.

The radio channel controller allows to control domestic appliances remotely. It is used to switch on/off irons, garage gates, water heaters and heat-insulated floors.

The relay is a wireless low-voltage relay. The relay can be used to remotely switch on/off devices powered by a 7-24 V DC source. The device communicates with the hub via the Jeweller radio protocol.

Relay for smart plug type F Wireless 868 MHz Jeweller Communication range up to 1100 m Power supply 230 V AC 50 Hz Control via smartphone or manually Electricity consumption monitor

Lateral cover for smart plug type F Compatible with AJ-OUTLETCORE-SMART LED indicator for socket status and power consumption Tactile button for manual control Feedback LED

Ajax - Light switch Central button Touch panel for double light switch Compatible with AJ-LIGHTCORE-2G LED backlighting Non-contact touch central panel

Ajax - Light Switch Central Button Touch panel for light switch Compatible with AJ-LIGHTCORE-1G / -2W LED backlighting Central touch panel without contact

Ajax Central Front Cover for F-Type Smart Socket Features a tactile button on the front panel for manual control LED indicator for device status and power consumption LED backlighting

Kit via radio, w/ Central, Command, Det. PIR, Magnetic Contact

Kit via radio, w/ Central, Command, Det. PIR, Magnetic Contact

Central via radio, 64 zones, 8 keyboards, LAN, Wi-Fi, GPRS

Central via radio, 96 zones, 8 keyboards, LAN, Wi-Fi, 3/4G

Signal repeater 868 MHz, LED indicators, auto-pairing.

Radio siren, 3 types of sound

Radio siren, arm/disarm sound, blue flash, 90~110dB

Radio optical smoke detector, Ind. LED

PIR detector via radio, 15m / 85.9º, animal immunity up to 30Kg

Remote control to arm/disarm, lock/unlock

Numeric keypad via radio, 4 LED indicators, Buzzer

NVR Recorder 16 channels H.265 / H.264 Compression Resolution up to 4K (25/30 FPS) 100Mbps Bandwidth Space for 1 HDD up to 16 TB.

Corridor lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.

Drill-in magnetic detector , NC contact with wires. Color Brown.

The JA-87P wireless outdoor detector with curtain lens characteristics is designed to indicate disturbances outside the building caused by human bodies. It is a dual zone outdoor detector by Optex with a 5° angular width detection zone which makes it very suitable for guarding narrow spaces such as balconies, French doors, terraces, etc. It is supplemented with a transmitter compatible with JA-8x OASiS systems. Both the detector and the transmitter are powered by a lithium battery. The common power supply is beneficial as the low battery signal is transmitted to a control panel as standard. The detector is equipped with three TAMPER contacts (at the front on the detection part and the front and rear on the transmission part), which immediately report opening of the detector cover or its tearing from the place of installation. The detector can also have the anti-masking function activated. The detector reports its current status via control transmissions to the system.

This siren was designed and made in Portugal.

It has been designed for exterior use. Get is power trough the alarm central and a backup battery incorporated.

Have a tamper that originates an alarm in case of cover violation.

The WJ-80 is designed to connect JA-80H outdoor keypads or JA-80N RFID readers to a control panel. It provides an output to operate the electric strike of a door lock and is equipped with a wireless door bell transmitter.
The WJ-80 can also be used to interface to a third party keypad (reader) which uses Wiegand 26b protocol (e.g. HID RK-40 a RK-10).

Receiver module for connecting Ajax detectors to wired and hybrid security systems. The device is integrated into any central unit with wired security areas.

Siren kit external, wired to the security console SC-28 Homeprotector.
When the control panel SC-28 is triggered, sends a set of X10 signals to the grid that can be used to activate the lighting of your home or signaling systems such as sirens or fireflies.

The Universal GSM module is easy to connect (install) with your HomeGuard or other PSTN alarm panels, by inserting a telephone wire in both analogue inputs. The GSM module enables the control panel to communicate via cellular networks.
The modem translates the analogue signals and converts them into a GSM signal. A SIM card (prepaid or subscription from any provider) has to be placed inside the GSM module.
The GSM module creates a two-way communication. This enables your security system to send an alarm alert to your mobile phone in cause of an emergency, and makes it possible to monitor and control your security system remotely.
This model is supplied with an E-plug.

This module provides 10 additional wired inputs, thus extending the total capacity to 14 wired inputs.

This AJAX NVR108 with 8 channels recorder allows you to capture and store video and audio recordings from your security system. When connected to surveillance cameras, microphones or other capture devices, the recorded images or audio are stored on the device's internal hard drive.

The receiver module for connecting Ajax detectors to wireless security systems and smart home solutions.

Send a help message in case off na emergency. If the user presses the "Emergency Call" button an panic alarm is triggered.

The JA-80IR is designed to detect the interruption of infra-red beams by intruders walking between IR transmitters and receivers. The unit comprises an Optex sensor and a Jablotron transmitter and is powered by 4 lithium batteries. Tampering is also signalled to the control panel in addition to beam blocking and the results of regular self-testing.

The Remote Chime is designed to work with the X10 Security Console or Home Controller to provide a pleasant annunciator chime when someone approaches. It will also respond as Siren in case the Security Console is activated. It can also be activated using the correct House Code and Unit Code from any X10 controller.

The JA-85B glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking and it is designed for indoor use in buildings or in cars. The battery-powered detector communicates via OASIS radio protocol.

The OS-366A is an hardwired outdoor backup siren combining a loud acoustic siren with a flashing light. The high-powered flashing light helps to locate the active siren

PowerHorn is used as an additional audio alarm unit for use with the Home Security System which gives an additional independent 110 decibel sound output when the security system is triggered. The PowerHorn will only trip a few seconds later after the alarm trips. It counts the sequence transmitted to flash lights connected to Lamp Modules after the lights have flashed 4 or 5 times. This prevents it from being accidentally tripped from any other X10 controller.
You can also trip the PowerHorn from any other X10 controller, which is useful in panic situations.
It can be added anywhere around the home; nobody wants to hang around when one of these activate.

The detector has one NA (normally open) input for connecting the detector’s probe (included).
Coded RF signal with 30m range in open field.
Up to 30 detectors can be used with the SC-28 Homeprotector.

The JA-60P is an intruder detector designed to detect human body movement in a protected area.

(Used unit, refurbished as new)

The JA-85P mini-size motion detector uses a PIR sensor and it is designed for indoor use in buildings or in cars. The battery-powered detector communicates via OASIS radio protocol

The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc).

The RC-87 is a component of Jablotron’s Oasis 80 alarm system. It allows users to trigger panic alarms or to control appliances remotely.

The detector indicates fire hazards using the built-in LED indicator and alarm outputs ALARM and TAMPER. These outputs must be connected to control panels complying with EN 50131-3.
The SD-282 ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light and is very sensitive to dust particles which are present in smoke. There is also a built-in heat detector for detecting fire which generates heat quickly with a small amount of smoke. The microprocessor performs digital analysis for a high false-alarm immunity.

The JA-65X digital communicator is designed for JA-63 and JA-65 alarm control panels. If the 65X module is installed, the control panel can communicate with a Monitoring Station, send voice messages, SMS messages and dial a numeric Pager as well as communicate with a remote PC. A standard analog telephone line (type TNV 1-3) must be connected to the module for these functions.

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
The detector guards the same way as a classic PIR motion detector.
When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.

The RC-88 is designed to be a remote control for setting/unsetting (arming/disarming) an alarm system, triggering panic alarms or remotely controlling other appliances. The battery-powered wireless button communicates via OASIS radio protocol.

Get warned by flooding and intervene to prevent against water damage. The ebode water detector is battery operated and provided with 2 sensors which have to be placed on the location where water will be expected. When detecting water or moisture the eWD18 will sound an alarm (85DB), like a smoke detector does as a stand-alone system. To register the eWD18 to an X-10 network (BS800 HomeGuard, SC-28 Homeprotector/ProtectorPlus BS880/4 and BS880/7), the water detector is part of your X10 security system and here an alarm message will also be given.

Tens of detectors and kilometers of wire can now effortlessly be transformed into a modern smartphone-controlled security system. Replacing the old security central unit, the module connects wired devices to a hub and makes them a full-fledged part of Ajax. MultiTransmitter is a step towards awareness and reliability. For a security company, it opens the possibility to configure the equipment remotely, and users get all the benefits of managing the system through an app.

Bracket for indoor siren - AJ-HOMESIREN-W
ABS plastic- White colour

Maintenance-free rechargeable lead-calcium batteries with 12V voltage and 2,2Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.