Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: X10

    Transceiver Module - Refurbished TM13G / TM13F / TM13I / TM13U

    €29.90 excl tax
    The TM13 is an X10 radio-frequency converter in X10 powerline commands.
    This equipment is necessary to control the X10 receivers (lights or apparatus from any RF X10 control.
    Receives and transmits X10 signals ON / OFF, Dim / Bright, All lights ON, All units off, among others.
    The TM13W is itself an X10 device actuator, you can connect and control any electrical device.
    SKU: TM13W_REF




    TechInfo: Power supply: 230V + 10% - 15%, 50Hz
    Current: & lt; 20mA capacitive
    Maximum Load: 5A max. Resistive
    RF Frequency: 433.92 MHz
    X10 Electrical Network: 120 kHz ± 2 kHz, 3.5 Vpp
    Signal Sensitivity: 15mVppm, 50mVpp at 120 kHz
    Input Impedance:> 180_ (L / N) at f = 120 kHz
    Ambient temperature: 0 ° C to 50 ° C (operating), -20 ° C to 70 ° C (storage)
    Dimensions: 52 x 122 x 33 mm
    EMC emission: according to EN 50081-1
    EMC immunity: according to EN 50082-2
    Safety: according to EN 60950 and 60065
    Warning: Refurbished Equipment
    By default the plugs are type C (European plug)
    We can install type E (France, Belgium and others), F (shucko) and G (UK and others) at the customer's request





    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent




    TechInfo: Power supply: 230V + 10% - 15%, 50Hz
    Current: & lt; 20mA capacitive
    Maximum Load: 5A max. Resistive
    RF Frequency: 433.92 MHz
    X10 Electrical Network: 120 kHz ± 2 kHz, 3.5 Vpp
    Signal Sensitivity: 15mVppm, 50mVpp at 120 kHz
    Input Impedance:> 180_ (L / N) at f = 120 kHz
    Ambient temperature: 0 ° C to 50 ° C (operating), -20 ° C to 70 ° C (storage)
    Dimensions: 52 x 122 x 33 mm
    EMC emission: according to EN 50081-1
    EMC immunity: according to EN 50082-2
    Safety: according to EN 60950 and 60065
    Warning: Refurbished Equipment
    By default the plugs are type C (European plug)
    We can install type E (France, Belgium and others), F (shucko) and G (UK and others) at the customer's request