Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    VisionSecurity

    Vision Security full range of smart home products available on eurox10

    View as Grid List
    Sort by
    Display per page

    Vision PIR-Sensor Z-Wave plus

    €43.92 incl tax €54.89 incl tax
    This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device.
    Up to 4 devices can be controlled from this device.
    Beside the motion detector function the device also works as temperature sensor.
    The installation can be done with screws or double-sided tape.
    The device is battery-operated and therefore in sleeping mode unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus.
    Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced.
    A tamper switch protects the device from removal or manipulation if used in security applications.
    The powerful CR123 Lithium battery lasts 3 ... 5 years on normal operation conditions. The device supports normal Z-Wave inclusion, auto inclusion and network wide inclusion for convenient handling.

    Z-Wave Door Lock with Handle

    €281.67 incl tax
    The ZM 1702 is a Z-Wave controllable door lock that fits into standard European doors. The mechanics can be adopted to right or left opening doors.
    The door lock can be applied for doors from a thickness of 38 mm and up. Since the lock is just a single dead bold lock it will not replace modern three dead bold locking outer doors.
    The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4...8 key long) and to limit the validity of certain key code.

    Z-Wave Door Lock without Handle

    €256.89 incl tax

    The ZM1701 is a Z-Wave controllable door lock that fits into standard European doors.

    The door lock can be applied for doors from a thickness of 38 mm and up. Since the lock is just a single dead bold lock it will not replace modern three dead bold locking outer doors.

    The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4...8 key long) and to limit the validity of certain key code.

    Vision Wireless Siren with battery Z-Wave Plus

    €43.66 incl tax €54.59 incl tax
    The siren will warn everybody in the building by a loud sound and a flashing light about an alarm. This product is especially suited for security applications in combination with other Z-Wave devices such as door or windows sensors or motion detectors. The siren gives a loud sound and a flashing warning light, so everybody in the building will know immediately that an alarm has occurred. The noise level fo the siren is > 105 dB in range of 1 meter. The device can be configured to either use the strobe flash or the acoustic siren or both. A tamper switch protects the device from removal or manipulation if used in security applications. The device is battery powered.

    Vision Wireless Siren with mains power Z-Wave Plus

    €59.03 incl tax €73.79 incl tax
    The siren will warn everybody in the building by a loud sound and a flashing light about an alarm. This product is especially suited for security applications in combination with other Z-Wave devices such as door or windows sensors or motion detectors.
    The siren gives a loud sound and a flashing warning light, so everybody in the building will know immediately that an alarm has occurred.
    The noise level fo the siren is > 105 dB in range of 1 meter.
    The device can be configured to either use the strobe flash or the acoustic siren or both.
    A tamper switch protects the device from removal or manipulation if used in security applications.
    The device is mains powered but has a backup battery inside to remain in operation in case of a power outage.

    Door/Window Sensor

    €35.20 incl tax €44.00 incl tax
    Zipato’s Door/Window Sensor consists of sensor and a magnet. One piece mounts on the door/window frame, and the other mounts on the door/window itself. When the two components separate, sensor reports that door/window is open. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. It can be used either to detect intruders or to automatically trigger other Z-Wave devices when activated Like all Z-Wave devices displaying the Z-Wave logo, Zipato Door/Window Sensor can also be used with various Z-Wave networks and controllers, regardless of the manufacturer.