Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: PoPP

    Wireless adapter plug switch Z-Wave Plus

    €55.34 incl tax

    This is a switch plug-in and is used between a standard Schuko wall outlet and electrical loads connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The device switches all kinds of loads. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller.

    SKU: ZWPOP009006

    Features: A multi color LED indicates the switching status and the assignment of the colors to the switching status can be defined by the user. The device will report any change of the switching status to a central gateway regardless the origin of the switch (local or wireless).

    A built in virtual power meter will report the power consumption of the load attached. However the user must configure the assumed constant power draw of the load. The local button can control the local load but can also be used to control other functions in a Z-Wave network.

    Single and Double Clicks are distinguished.

    The device is certified and tested against all important European Safety Regulations such as EN 61058, DIN VDE 0620-1:2005.

    The device fully complies with the Z-Wave Plus standard.

    TechInfo:

    • Power rating: 230V, 50 Hz;
    • Maximum load: 0 ... 3500W (16A);
    • Wireless behaviour: receiver;
    • Z-Wave type: routing slave;
    • Distance: up to 100m outdoor, up to 30m in buildings;
    • Display: multicolour-LED;
    • Local interaction: one button for switching, inclusion, exclusion and association;
    • Power supply: via 230 V power.









    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features: A multi color LED indicates the switching status and the assignment of the colors to the switching status can be defined by the user. The device will report any change of the switching status to a central gateway regardless the origin of the switch (local or wireless).

    A built in virtual power meter will report the power consumption of the load attached. However the user must configure the assumed constant power draw of the load. The local button can control the local load but can also be used to control other functions in a Z-Wave network.

    Single and Double Clicks are distinguished.

    The device is certified and tested against all important European Safety Regulations such as EN 61058, DIN VDE 0620-1:2005.

    The device fully complies with the Z-Wave Plus standard.

    TechInfo:

    • Power rating: 230V, 50 Hz;
    • Maximum load: 0 ... 3500W (16A);
    • Wireless behaviour: receiver;
    • Z-Wave type: routing slave;
    • Distance: up to 100m outdoor, up to 30m in buildings;
    • Display: multicolour-LED;
    • Local interaction: one button for switching, inclusion, exclusion and association;
    • Power supply: via 230 V power.