The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI™) and unique pet identification software algorithm, the Next+ K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).

Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode™ technology is compatible with the PowerMax® wireless family and other Visonic PowerCode™ wireless receivers.
Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm.
Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR™ algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.

The MCT-501 is a fully supervised digital glass-break wireless detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed for a wide range of residential and commercial applications where reliable glass-break detection is required.
The MCT-501 employs an advanced patented acoustic pattern recognition technology that can reliably distinguish between true alarms and false alarms. It provides 360o detection range of up to 6m (20 ft) and can detect breaking of different types of glass including plate, tampered, laminated and wired.

The MCT-550 is a fully supervised wireless flood detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset.

TOWER®-20AM MCW is a ground-breaking anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes, and free-roaming animals, while still providing reliable detection of real threats.
TOWER-20AM MCW features the revolutionary Octa-Quad™ technology, which uses eight PIR sensors (compared to only one used in other outdoor detectors), with each sensor acting as a Quad detector, to accurately determine whether an alarm is justified. In addition, further increasing its reliability, TOWER-20AM MCW also has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation to provide exceptionally high resistance to vandalism and masking.

The TOWER 40 is a microprocessor-controlled wireless digital PIR detector, designed for easy installation, free of vertical adjustment. It features parabolic and cylindrical mirrors with uniform detection sensitivity throughout its operating range, up to 18 meters (59 ft), with creep zone protection.
The advanced True Motion Recognition™ algorithm (patented) allows the TOWER 40 to distinguish between true motion of an intruder and any other disturbances which may cause false alarms.
An on-board motion event jumper determines whether 1 or 2 consecutive motion events trigger an alarm.

The MCT-560 is a fully supervised wireless PowerCode detector used with the PowerMax Pro (Ver. 5). The detector alerts the alarm system control panel upon detecting critical indoor or outdoor temperatures. The detector generates an alarm message when its sensor detects that the temperature has reached a certain temperature point. A restore message is generated when it crosses back the threshold temperature point. There are a total of four fixed temperature points and the user can enable one or more temperature point.
The MCT-560 can be used in instances where temperature detection is critical. Other examples of detector usage are as follows:

• Activating and deactivating pipe heaters at locations where low temperatures may causes the water in pipes to freeze.
• Warn of possible electrical device malfunction due to high or low temperature levels.
• Alerting elderly people of a significant rise or drop in room temperature.

The MCT-560 detects both indoor and outdoor temperatures. The detector monitors room temperature using an internal sensor. For outdoor or refrigerator installations, a waterproof temperature probe (optional) is used.
When the probe is connected, the temperature measurement is performed only by the probe sensor. When the probe is not connected, the temperature measurement is performed only by the detector's internal sensor.
Once the predefined temperature is reached, the detector wirelessly updates the alarm system control panel which then sends a notification to the central station or uses the PGM/X-10 controls to switch on a connected appliance, for example, a heater or air conditioner.