Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: TKBhome

    Z-Wave Single Paddle Wall Dimmer

    €38.50 excl tax

    The TZ65-S single wall dimmer is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol. It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software. Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time or two times the switching paddle performs the control. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation.

    The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style, which can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.

    SKU: ZWtkbTZ65-S





    TechInfo:

    • Power rating: 230V, 50 Hz;
    • Wiring: 3-wire system;
    • Wireless behavior: receiver and transmitter if further units are associated;
    • Z-Wave type: slave;
    • Distance: up to 30 m in buildings;
    • Display: 1 blue LED shows switching status;
    • Interaction: one button for switching, inclusion, exclusion and association;
    • Installation: in a pattress box.

    Warning: The Switch does not fit in a german 60mm pattress box!





    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent





    TechInfo:

    • Power rating: 230V, 50 Hz;
    • Wiring: 3-wire system;
    • Wireless behavior: receiver and transmitter if further units are associated;
    • Z-Wave type: slave;
    • Distance: up to 30 m in buildings;
    • Display: 1 blue LED shows switching status;
    • Interaction: one button for switching, inclusion, exclusion and association;
    • Installation: in a pattress box.

    Warning: The Switch does not fit in a german 60mm pattress box!