Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    ZWave

    ZWave available on eurox10.com

    Show/Hide Categories
    View as Grid List
    Sort by
    Display per page

    Z-Wave Door Lock without Handle

    €256.89 incl tax

    The ZM1701 is a Z-Wave controllable door lock that fits into standard European doors.

    The door lock can be applied for doors from a thickness of 38 mm and up. Since the lock is just a single dead bold lock it will not replace modern three dead bold locking outer doors.

    The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4...8 key long) and to limit the validity of certain key code.

    Z-Wave Plug-in Dimmer

    €37.50 incl tax
    The TKB Home TZ 67G is a dimmer plug-in and is used between a standard British wall outlet and lamps connected to a wall outlet by cable. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller. It dims standard lamps only (resistive load). Local operation is possible by pressing the button on the device.

    Z-Wave Plus Plug-in Dimmer

    €44.90 incl tax
    The TKB Home TZ 67G is a dimmer plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller. It dims standard lamps only (resistive load). Local operation is possible by pressing the button on the device.

    Z-Wave Switch Plug for Schuko 500 series

    €44.90 incl tax
    The Z-Wave Switch Plug for Schuko 500 series is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for Schuko Plug and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.

    Z-Wave Switch Plug for Type E - 500 series

    €44.90 incl tax
    The TKB TZ68 is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for plug (type E – French plug) and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.

    Z-Wave Switch Plug for Type G - 500 series

    €44.90 incl tax
    The TKB TZ68 is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for plug (type G – UK plug) and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.

    Floor Sensor Ø4MM for Heatit Thermostat

    €24.99 incl tax
    The Floor Sensor is ideal suited to measure soil temperature – especially when using a floor heating – and reporting to the Heat-it thermostat. Therefor the sensor can be laid in empty conduits and set into the ground.

    NTC 10 kOhm @ 25°C
    Cable length: 3 meters

    Hank One-Button Scene Controller

    €29.99 incl tax
    The One-Button-Scene Controller of Hank is a battery operated remote control which allows you to control multiple devices within one network by pressing the button.
    You can program the scene controller individually and based on your needs. It is programmable that you can start the coffeemachine out of the bed and the coffee is ready if you come out of the bath room. Another way of use: you install it on the wall and it works like a remote controller for your lights or other scenes.
    The Scene Controller works with battery which is rechargeable and there is a low battery alert.

    NEO Coolcam - Door/Window Sensor

    €29.99 incl tax
    The NEO Coolcam Door/Window Sensor provides information whether a door or window is opened or closed.

    The battery operated sensor consits of the main unit and a magnetic element. The main unit should be installed on the frame and the magnetic element is placed on the door or window. The mounting of the 2 elements can be done with screws or stickers.

    In combination with additional devices of Z-Wave like a siren or motion sensors you can create your own alarm system which promises more safety. All you need is a combination of the mentioned sensors like the Door/Window Sensor and a Z-Wave Smart Home gateway.

    Pack of 3 Z-Wave Switch Plug for Schuko 500 series

    €134.68 incl tax €165.67 incl tax
    The Z-Wave Switch Plug for Schuko 500 series is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for Schuko Plug and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.

    POPP 433 Bridge - black

    €49.99 incl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.

    Sensative STRIPS Door and Window Sensor

    €57.99 incl tax
    Strips by Sensative is an ultra-thin magnetic sensor designed to monitor and protect the status of windows or doors and reports the data to the smart home controller. To do this the sensor can be mounted almost invisibly on frames of doors or windows. Strips by Sensative consists of two components: The thin narrow strip is mounted on the window or door frame and the small square magnet is mounted on the movable part of the window or door.
    Strips is 19,5cm long and only 3mm thin, is Z-Wave Plus certified and can also be used outdoors. Its built-in battery has a life time of up to 10 years.

    Vision Wireless Siren with mains power Z-Wave Plus

    €73.79 incl tax
    The siren will warn everybody in the building by a loud sound and a flashing light about an alarm. This product is especially suited for security applications in combination with other Z-Wave devices such as door or windows sensors or motion detectors.
    The siren gives a loud sound and a flashing warning light, so everybody in the building will know immediately that an alarm has occurred.
    The noise level fo the siren is > 105 dB in range of 1 meter.
    The device can be configured to either use the strobe flash or the acoustic siren or both.
    A tamper switch protects the device from removal or manipulation if used in security applications.
    The device is mains powered but has a backup battery inside to remain in operation in case of a power outage.

    Wall Plug Dimmer (Type G)

    €52.28 incl tax
    This is a wall plug dimmer that can be placed between a schuko wall outlet and electric devices, plugged in by cord. It can dim all incandescent lights, high voltage halogen lamps and transformers operated low voltage lamps without any restriction. Special optimization functions support the dimming of the majority of dimmable LED lights and Compact Fluorescent Lights (CFLs). The device is IP20 rated and can therefore only be used in dry environments. The device offers a Baby-Dim Function which dims down a lamp from a defined level into another defined level in a longer but also definable period (e.g. 20 minutes). An automatic Light-Off function and programmable dimming and switching behavior makes the device a very flexible tool for the inhouse lighting.

    Hank Motion Sensor

    €34.99 incl tax
    Protect yourself and also your loved ones in your own four walls while you know if there is somebody moving in your home. As a part of your Smart Home it informs dependably about every motion in your home.
    The Motion Sensor of Hank with a compact design like a ball reacts to that what is occuring in your home in real-time. By the compact design and the easy installation, which is nearly anywhere possible, the battery operated sensor fits very well in your rooms. It can be placed in a corner, on the walls or on the ceiling.
    In addition to other devices of the Z-Wave family you can switch the lights automatically to create the right and requested lighting in your home. Or you expand your security system with the Hank Motion Sensor to get an alert if an unauthorized person moves in your four walls.

    Smoke Detector with Siren (battery for 10 Years)

    €89.95 incl tax

    The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping. Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.

    Thank to its integrated 10-year battery the smoke detector can be used for legally prescribed lifecycle without replacing the main battery. The Z-Wave module‘s battery can be replaced with just a few simple steps when the device informs the control center about low battery status. Low Z-Wave module battery has no influence to the smoke sensors functionality.

    This device is the first smoke sensor with Z-Wave which has the Q-label (Vds 3131) for extended quality.

    Beyond these functions the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.

    Wall Thermostat (white)

    €149.99 incl tax
    This equipment is an electronic wall thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with your Home Automation systems. The thermostat is equipped with a single-pole switch an can handle loads up to 16A/3600W at 230V. The Device can be used with two external temperature sensors and shows the ambient temperature, either in the room or floor. The sensitive cap sense buttons can be used to set new values by lightly pressing.

    Z-Wave Plus integrated.

    Wireless adapter plug switch Z-Wave Plus

    €55.34 incl tax

    This is a switch plug-in and is used between a standard Schuko wall outlet and electrical loads connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The device switches all kinds of loads. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller.

    HEATIT Z-Scene Controller 2

    Call for pricing
    The Heatit Z-Scene Controller 2 is our new innovative wall switch. The front is elegantly designed with a uniform diffused backlight in each square. The squares can light up in all colors which can be used to show the status of a lamp, as orientation light during nighttime, visual alarm and much more. Each square is a tactile switch that can hold up to four functions and control either a wired lamp or other Z-Wave devices, e.g. other light dimmers, roller shutters and power outlets.

    HEATIT Z-TRM2fx

    €158.67 incl tax
    The Heatit Z-TRM2fx is our newest thermostat, packed with innovative features. The thermostat works both with traditional electrical floor heating and hydronic systems. The thermostat gives you exact temperature measurements in your house, in order for you to monitor your house status while you are away.

    Wallswitch with Dual Paddle TZ36 - Z-Wave Plus

    €82.30 incl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a double paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load.

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with the 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Z-Wave Smoke Sensor with indoor siren function

    €69.99 incl tax
    The Z-Wave smoke detector from manufacturer POPP sets new safety standards in your home.
    There are a lot of potential fire sources in your own four walls, for example open fire such as candles or a fireplace. Also an iron, cooking utensils or numerous other electrical device can cause fire.
    Smoke detectors can save lives. In case of a fire or smoke emission every second counts giving the chance to extinguish the fire or to get somebody or themselves out of harm’s way. The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping.
    Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.
    Z-Wave smart home buys time for you to get somebody or yourself out of harm’s way.
    Beyond these functions the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.

    Battery powered wireless wall controller

    €51.04 incl tax
    With this battery wall controller you can control your smart home from everywhere in the room, because the flat switch can be positioned on and removed from every planar surface without laying or pay attention cables. Switch the lights, the heating and window blinds with only one touch of a button. Using the wall controller is as simple as using an ordinary light switch – but with significantly more functions.
    The device could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the wireless wall controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the battery wall controller as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by the controller directly.
    Once one device is added to the wall controller it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the battery wall controller to an existing Z-Wave smart home network. Therewith you have the possibility to trigger defined scenes such as the closing of the shutters with simultaneous switching on all lights in the room by only one touch of a button. Or place the wall controller next to your entrance door and start the scenario All of when youre leaving home to switch off al lights and electrical devices you do not need during absence with only one touch of a button.

    Hank RGBW LED Bulb

    €46.74 incl tax
    Bring color into your life and create a personal comfortable atmosphere with dimmable white and color shades. The Hank RGB LED bulb fits into every E27 bulb holder and can be connects to a smart home center through Z-Wave wireless technology right after screwing in. The required radio chip is already integrated into the bulb’s housing. Via remote control, smartphone or tablet you can vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes or use scenes (e.g. in case of an alarm) activating appropriate light color.

    As a special function, the Hank bulb light color can be completely adjusted without using a smartphone app. Just control it over the existing wall switch. Through the combination of ON/OFF at the wall switch, the bulb will go into a fade mode and fades through all main colors. Once you have found the color you like, you select it by switching ON/OFF the bulb again. Then the fade mode will stop and the bulb will stay in the current color mode.

    Due to LED technology, power consumption is very low compared to conventional bulbs. The Hank bulb is as bright as a conventional 60W bulb, but needs only 7W.

    HEATIT Z-DIN 616

    €236.16 incl tax
    The Heatit Z-Din 616 is designed to be mounted on DIN rails. It features 6 potential free outputs capable of supplying 16Amps at 230V, and 6 digital inputs. This makes the Heatit Z-Din 616 a flexible DIN rail mounted Z-Wave device, which may be used for anything from controlling lights to motors or contactors.

    HEATIT Z-RELAY

    €116.85 incl tax
    The Heatit Z-Relay may be used to control high-current loads and it has power metering functionality. This makes you able to discover any installation that uses too much power, causing your electrical bill to skyrocket. It can also be used with a leakage sensor and a solenoid valve, enabling you to turn off the main water supply before it is too late. You can also setup notifications when leak is detected, so you can feel extra safe.

    HEATIT Z-Water

    €246.00 incl tax
    The Heatit Z-Water is designed to be used with the Heatit Z-TRM2fx thermostat or the Heatit Z-Temp. With a thermostat in each room, the Heatit Z-Water controls the solenoid valves that control the individual heating zones. It also has 4 analogue inputs for 10KΩ NTC, which may be used to measure exact temperatures where needed.

    Z-Weather

    €199.90 incl tax

    Z-Weather is the world’s first energy-automated Z-Wave sensor.

    The multifunctional sensor is powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measures to the Z-Wave Controller even during the night. The built in energy manager automatically calculates and sets the wake up interval between 5 minutes (on sunny days) and 1 – 2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continous operation for reporting gusting wind, storm or dusk in case of emergency.

    CO Detector

    €91.02 incl tax
    Carbonmonoxid is posion and can be very insidious. You can not see it, you can not taste it and you can not smell it.
    This product combines a certified carbon monoxide detector with a plug-in Z-Wave module to form a wirelessly reporting carbon monoxide sensor. The carbon monoxide detector is certified according to EN 50270:1999, EN 60335-1:1994 as well as EN 50291:2001 and satisfies all contemporary legal requirements.
    The high-end carbon monoxide detector offers a test button conveniently accessible – e.g. with a broom stick – when mounted on the ceiling. Three colored LEDs on the device indicate Alarm, Error and Battery Level. The Alarm conditions as well as the actual CO level – measured in ppm – are reported wirelessly using Z-Wave. Additionally, a group of actuators can be controlled using the BASIC command class in case the CO alarm triggers. Two configuration parameters define what command to be sent in this case. The device is a secure Z-Wave Plus device and can be used in one wireless Z-Wave network with other certified devices regardless of origin and brand. It supports secure communication if the central controller supports secure communication as well. Even if included securely the device is able to communicate unsecured with devices included unsecure using the association group 2. Beside the Carbon monoxide danger alarm the device will also report a tamper alarm if the sensor is removed from the mounting base. The POPP CO detector with integrated Z-Wave technology helps you to make your Smart Home even safer.

    KEYFOB-C mini 4 Button Remote Control

    €51.67 incl tax
    You want to be in control of your smart home? With the KFOB-C remote control you can switch the lights, the heating and window blinds with only one touch of a button. Using the KFOB-C remote control is as simple as using your car key remote control – and it is equally small and compact and suits to your key ring. Furthermore the robust sliding cover prevents involuntary touches of the buttons.
    The KFOB-C remote control could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the KFOB Controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the KFOB as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by KFOB-C directly.
    Once one device is added to KFOB remote control it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the KFOB-C to an existing Z-Wave smart home network. Therewith you have the possibility to trigger predefined scenes such as the opening of the garage door with simultaneous switching of all lights in your garden by only one touch of a button. Or start the scenario “Good night” which switches off al lights and electrical devices in your house with only one touch of a button when you go to bed.

    POPP KeyPad

    €179.00 incl tax
    The Keypad is the first Z-Wave enabled and outdoor Keypad in the Smart Home world!
    The Keypad can activate and deactivate your security system by using an individual Pin Code. Furthermore you can unlock connected doorlocks without a key but with a multi-digit Code.
    As soon as somebody logs in with his personal Pin Code you will be informed automatically. Because of that you even know while your on the road, when your kids arrived at home. Beside the Keypad does not need a key, which are often lost by kids.

    The POPP Keypad can save up to 20 different Pin Codes. Each Code can have 4-10 digits. Every single Pincode has its own scene ID and can start other scenes. Meanwhile you can also us the different scenes IDs to see, who and when one of the residents came home. Additionally the Keypad has an separated doorbell button, which controls his own scene. That way you can switch on a light and turn down the volume of your hifi system when somebody rings the door.

    The Keypad is protected against tamper and burglar the Keypad has an integrated magnetic sensor. If the Keypad is move unauthorized, you receive a push message (gateway mode) immediately or a siren will be triggered. In addition a separted scene ID is used, when a wrong Pin Code is entered. As a result you know directly when somebody use the keypad unauthorized. An integrated multicolor LED shows, if the Pin Code was entered correctly and informs if the entered Code was transmitted successfully.

    Stand alone and Gateway mode
    The Keypad can be used in 2 different modes. Firstly it can be use in connection to a doorlock or dooropener in the Stand-Alone mode. For that you do not need a Z-Wave gateway because the Keypad is directly associated with the door opener.
    Secondly the Keypad can be used in the Gateway mode. For that the keypad is connected to the Gateway and is shown as a scene controller. Each access code gets his own scene ID. The doorbell button and the wrong entering of code will be shown with own scene IDs.

    ZWave

    Filter by:

    Clear All
    Min: €0.00 Max: €890.00
    0 890