Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar

    PowerCode™ Wireless Magnetic Contact

    €36,75 sin IVA
    The MCT-302 is a fully supervised PowerCode™ magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.
    SKU: MCT-302 (868)




    TechInfo:
    • Frequency (MHz): 868;
    • Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse width modulation;
    • Overall Message Length: 36 bits;
    • Alarm Inputs: 2, one internal and one external, with a separate 24-bit transmitter ID each;
    • Auxiliary Input Circuit Type: N.C. / E.O.L., selected with DIP switch E.O.L. Resistor Required: 47 kO;
    • Message Repetition: Repetitive transmission (once every 3 minutes) or one-shot, as selected with on-board DIP switch;
    • Supervision: Signaling at 60-minute intervals or according to the local standard from the reed switch (if enabled) or from the aux. input (if the reed switch is disabled) ;
    • Response to Tamper Event: Tamper report every 3 minutes (until the tamper switch is restored) ;
    • Power Source: 3.6 V Lithium battery, size 1/2 AA, Tadiran;
    • Battery Life Expectancy: 3 years (for typical use) ;
    • Operating Temperature: 0°C to 49°C;
    • Dimensions: 81 x 22 x 23.5 mm;
    • Weight: MCT-302 (excluding battery): 34g;
    • Magnet: 13g;
    • Standards: Meets FCC Part 15, MPT1349 and Directive 1999/5/EC;








    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    • Malo
    • Excelente




    TechInfo:
    • Frequency (MHz): 868;
    • Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse width modulation;
    • Overall Message Length: 36 bits;
    • Alarm Inputs: 2, one internal and one external, with a separate 24-bit transmitter ID each;
    • Auxiliary Input Circuit Type: N.C. / E.O.L., selected with DIP switch E.O.L. Resistor Required: 47 kO;
    • Message Repetition: Repetitive transmission (once every 3 minutes) or one-shot, as selected with on-board DIP switch;
    • Supervision: Signaling at 60-minute intervals or according to the local standard from the reed switch (if enabled) or from the aux. input (if the reed switch is disabled) ;
    • Response to Tamper Event: Tamper report every 3 minutes (until the tamper switch is restored) ;
    • Power Source: 3.6 V Lithium battery, size 1/2 AA, Tadiran;
    • Battery Life Expectancy: 3 years (for typical use) ;
    • Operating Temperature: 0°C to 49°C;
    • Dimensions: 81 x 22 x 23.5 mm;
    • Weight: MCT-302 (excluding battery): 34g;
    • Magnet: 13g;
    • Standards: Meets FCC Part 15, MPT1349 and Directive 1999/5/EC;