Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar
    Fabricante: X10

    Two load appliance in-wall module

    €28,90 sin IVA
    The S2268HE module allow to control two individual loads, being small enough to fit behind a wall switch or junction box. It allows to control both internal relay either using any conventional electric switch (push buttons are not supported) or remotely, using any X-10 compatible controller.

    This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.
    SKU: S2268HE
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Features:

    • Allows to control 2 individual loads either locally or remotely, using any compatible X-10 controller;
    • Potential free inputs, compatible with electric switches (push buttons are not supported);
    • Can be programmed to receive group commands (e.g. All Units Off);
    • Can  be programmed to accept until 16 X-10 address (per load);
    • Compatible with all X-10 devices;
    • Higher receiving sensitivity (25mVpp).



    TechInfo:

    • Supply voltage: 230V +/- 10% 50Hz;
    • Power consumption: <1 W;
    • Maximum load (by output):
      • Resistive loads: up to 8A;
      • Indutive loads: up to 1.5A;
      • Electric Transformer: up to 5A;
    • Ambient temperature: -10C to +50C;
    • Receiving signal sensitivity: 25mVpp;
    • Dimensions: 47mm x 51mm x 21mm;









    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    *
    *
    • Malo
    • Excelente
    *
    *
    *
    *

    Features:

    • Allows to control 2 individual loads either locally or remotely, using any compatible X-10 controller;
    • Potential free inputs, compatible with electric switches (push buttons are not supported);
    • Can be programmed to receive group commands (e.g. All Units Off);
    • Can  be programmed to accept until 16 X-10 address (per load);
    • Compatible with all X-10 devices;
    • Higher receiving sensitivity (25mVpp).



    TechInfo:

    • Supply voltage: 230V +/- 10% 50Hz;
    • Power consumption: <1 W;
    • Maximum load (by output):
      • Resistive loads: up to 8A;
      • Indutive loads: up to 1.5A;
      • Electric Transformer: up to 5A;
    • Ambient temperature: -10C to +50C;
    • Receiving signal sensitivity: 25mVpp;
    • Dimensions: 47mm x 51mm x 21mm;









    Los clientes que compraron este producto tambien han comprado

    Micromódulo de Persianas

    INS 2444-422
    €52,83 sin IVA
    Este módulo está diseñado para el control de persianas eléctricas.
    Recibe comandos X10.
    Disponibilidad: En existencia

    Double Button Wall Lamp Switch (3 Wires)

    S2221
    €37,40 sin IVA
    Disponibilidad: 4 en stock

    Wired Lamp Module

    LM12W
    €29,90 sin IVA
    The Wired Lamp Module is a small module that can be fitted easily in any false ceiling, wall, etc... to control your lights. The module can be installed directly into lighting fixtures. It can be built-in, wired to the light or lamp it has to controlled. Its small size allows you to fit this module almost anywhere. The perfect module when you want your X10 modules to be installed out of sight.

    Universal Alarm Interface

    SM10E
    €36,58 sin IVA
    Connects to an existing system and turns on lights when tripped. It has 3 modes of operation:
    In mode 1 the SM10 will turn On all Lamp Modules and Wall Switch Modules set to its House code, and will also turn On any other Modules set to its Unit code, a stereo connected to an Appliance Module, for example. All Lamp Modules and Wall Switch Module are left in the On state when the system is deactivated, but the Module set to the same Unit code as the SM10 will turn Off.
    In mode 2 the SM10 will FLASH all lights connected to Lamp Modules or Wall Switch Modules. All Lamp and Wall Switch Modules will be left in the On state when the system is de-activated but Appliance modules set to the same House code as the SM10 will turn Off.
    In mode 3 the SM10 will turn ON any Module set to the same House Code and Unit Code as the SM10 when the system is activated and turns it OFF when the input contact is opened.
    Set the input switch to A for triggering the interface by a low voltage input (6-8 V AC, DC or audio), to B for triggering the interface by a dry contact closure. Do not connect 220V to the input terminal!
    The SM10 has a test button which allows you to activate it whether or not it is connected to a system. The All light off button allows you to turn off anything which has been turned on by the interface.
    To install the SM10 (is expected to be installed inside the security controller panel) :
    • Connect the system output to the screw terminals.
    • Connect the flying lead to the 230V power supply, most likely at the 230V side of the transformer.

    Mini remote control

    KR22E
    €26,25 sin IVA
    The KR22 is a remote control with the size of a credit card.
    Is reduced size allows to be store in a pocket or purse. The capability of sending the “On”, “Off”, “Dim” and “Bright” commands can control 4 different X-10 addresses. It sends RF signals to any X-10 RF receptor.
    Disponibilidad: Agotado