Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar

    Wireless Detectors

    Wireless Detectors disponible en eurox10.com

    ordenar por
    Mostrar por página

    Wireless magnetic door detector & universal transmitter

    €55,90 sin IVA
    The JA-81M is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect the opening of doors, windows etc. It can also be extended by a normally closed / normally open sensor.
    It is also designed to detect the handling of roller blinds. This is achieved by detecting ratchet-wheel movements. Small movements are filtered out so that wind blasts do not cause false alarms.
    The battery-powered detector communicates via OASIS radio protocol.

    Wireless magnetic door-detector

    €64,50 sin IVA
    The JA-82M designed to detect opening windows, doors etc.

    Wireless motion detector with built-in camera

    €168,55 sin IVA
    The JA-84P provides human body movement detection including visual alarm verification.

    Wireless Motion/Glass-break Detector

    €119,00 sin IVA
    The JA-80PB consists of two independent detectors which occupy two separate enrollment addresses in the control panel. The motion detector uses a PIR sensor. The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking. The product is designed for internal use in buildings. The battery-powered detector communicates via OASIS radio protocol.

    Wireless outdoor PIR detector

    €354,00 sin IVA
    The JA-89P is an outdoor intruder detector designed to detect human body movement in a protected area. It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the sensor to be used within JA-80 OASiS systems.

    Wireless PIR Motion Detector

    €67,80 sin IVA
    The JA-80P is designed to detect human body movement inside buildings. The detection pattern can be modified by optional lenses. Detector immunity has two selectable levels. The battery-powered detector communicates via OASIS radio protocol.

    Wireless PIR motion detector

    €68,60 sin IVA
    This new compact PIR detector is available giving great performance and less visual impact. It works with Jablotron’s OASiS alarm system. It is designed to detect human body movement over 112 m ² of floor space inside buildings.
    The detection pattern can be modified by optional lenses to be pet-immune. Detector immunity has two selectable levels. The detector communicates via OASIS radio protocol runs on battery power.

    Wireless shock and tilt detector

    €69,90 sin IVA
    Detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill, or saw through. Has easy installation and uses digital signal processing. Features a memory of previous shocks.
    The detector is a component of the JABLOTRON ALARMS Oasis security system. It has two selectable operation modes. The mode for the detection of shocks / vibrations of doors, windows, etc. can be used to indicate attempts to breach these by force.
    The tilt detection mode can be used to indicate unwanted tampering with the object to which the detector is firmly fixed. This may be used for safes, artworks etc.
    The detector uses a semiconductor tri-axial accelerometer with digital output. Its signal processing guarantees a high immunity against false alarms.
    The detector communicates wirelessly using Oasis protocol and it is battery powered.

    Flood detector

    €21,50 sin IVA
    The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector. Plug it into the IN1 input terminal (red wire) and GND (black wire). If the detector is triggered (e.g. by a water), it sends a trigger signal. If the detector goes into a stand-by condition, it sends a non-triggered signal. The LD-81 takes its power supply from the JA-81M´s circuit.
    It is possible to use the LD-81 with an older type of detector, the JA-60N, for Profi systems if you insert a 4k7 resistor in series with the LD-81 between the INP (red wire) input terminals and GND (black wire).