Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar

    Wireless Detectors

    Wireless Detectors disponible en eurox10.com

    ordenar por
    Mostrar por página

    Wireless PowerCode Digital Mirror PIR Detector

    €74,72 IVA incluido
    The TOWER 40 is a microprocessor-controlled wireless digital PIR detector, designed for easy installation, free of vertical adjustment. It features parabolic and cylindrical mirrors with uniform detection sensitivity throughout its operating range, up to 18 meters (59 ft), with creep zone protection.
    The advanced True Motion Recognition™ algorithm (patented) allows the TOWER 40 to distinguish between true motion of an intruder and any other disturbances which may cause false alarms.
    An on-board motion event jumper determines whether 1 or 2 consecutive motion events trigger an alarm.

    Wireless Temperature Detector

    €63,65 IVA incluido
    The MCT-560 is a fully supervised wireless PowerCode detector used with the PowerMax Pro (Ver. 5). The detector alerts the alarm system control panel upon detecting critical indoor or outdoor temperatures. The detector generates an alarm message when its sensor detects that the temperature has reached a certain temperature point. A restore message is generated when it crosses back the threshold temperature point. There are a total of four fixed temperature points and the user can enable one or more temperature point.
    The MCT-560 can be used in instances where temperature detection is critical. Other examples of detector usage are as follows:
    • Activating and deactivating pipe heaters at locations where low temperatures may causes the water in pipes to freeze.
    • Warn of possible electrical device malfunction due to high or low temperature levels.
    • Alerting elderly people of a significant rise or drop in room temperature.
    The MCT-560 detects both indoor and outdoor temperatures. The detector monitors room temperature using an internal sensor. For outdoor or refrigerator installations, a waterproof temperature probe (optional) is used.
    When the probe is connected, the temperature measurement is performed only by the probe sensor. When the probe is not connected, the temperature measurement is performed only by the detector's internal sensor.
    Once the predefined temperature is reached, the detector wirelessly updates the alarm system control panel which then sends a notification to the central station or uses the PGM/X-10 controls to switch on a connected appliance, for example, a heater or air conditioner.