Close
(0) items
Sem itens no carrinho de compras.
Categorias
    Filters
    Preferências
    Pesquisa

    Z-Wave thermostat for electrical floor heating.

    €123,51 IVA incluido
    Heatit Z-TRM2fx is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc. Heatit Z-TRM2fx is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors. The thermostat has the capacity of up to 5 associations (relays, wall plugs etc.). The thermostat is designed for electrical heating. It can also be used for waterborne floor heating when linked with Heatit Z-Water.
    SKU: ZWHEA Z-TRM2fx

    Features:

    • Floor sensor
    • External room sensor
    • Temperature limiter
    • Weekly program/setback via gateway or pilot wire
    • Power metering
    • Can be used in connection with different NTC-sensors
    • Lock mode/child lock
    • Calibration
    • up to 5 associations

    Specifications:

    • Z-Wave Plus
    • Ratings voltage: 230V 50/60Hz
    • Max load: 2900W (resistive load)
    • 750W self-limiting heating cable
    • Max current: 13A
    • Power consumption: <2,0W
    • Min/max operating temperature: 5°C – 40°C
    • Temperature intervals Floor Sensor: 5°C – 40°C
    • External Room Sensor: 5°C – 40°C
    • Hysteresis 0,3°C – 3,0°C (default 0,5°C)
    • Switchable Single-pole switch
    • Compatible with NTC sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
    • Included in package Floor Sensor
    Partilhe a sua opinião!
    • Envio de reviews disponível apenas para clientes registados.
    • Mau
    • Excelente

    Features:

    • Floor sensor
    • External room sensor
    • Temperature limiter
    • Weekly program/setback via gateway or pilot wire
    • Power metering
    • Can be used in connection with different NTC-sensors
    • Lock mode/child lock
    • Calibration
    • up to 5 associations

    Specifications:

    • Z-Wave Plus
    • Ratings voltage: 230V 50/60Hz
    • Max load: 2900W (resistive load)
    • 750W self-limiting heating cable
    • Max current: 13A
    • Power consumption: <2,0W
    • Min/max operating temperature: 5°C – 40°C
    • Temperature intervals Floor Sensor: 5°C – 40°C
    • External Room Sensor: 5°C – 40°C
    • Hysteresis 0,3°C – 3,0°C (default 0,5°C)
    • Switchable Single-pole switch
    • Compatible with NTC sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
    • Included in package Floor Sensor