With the optional usable cable you can update Heat-it thermostats' software and firmware.

This flat sensor is an optional accessorie for Heat-it thermostats. It allows precise air temperature measuring at any position in the room. Measured values will be reported to the Heat-it for thermostat control.

The sensor owns a stylish glass surface and can be mounted to the wall directly.

The Floor Sensor is ideal suited to measure soil temperature – especially when using a floor heating – and reporting to the Heat-it thermostat. Therefor the sensor can be laid in empty conduits and set into the ground.

NTC 10 kOhm @ 25°C
Cable length: 3 meters

This equipment is an electronic wall thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with your Home Automation systems. The thermostat is equipped with a single-pole switch an can handle loads up to 16A/3600W at 230V. The Device can be used with two external temperature sensors and shows the ambient temperature, either in the room or floor. The sensitive cap sense buttons can be used to set new values by lightly pressing.

Z-Wave Plus integrated.

The Heatit Z-Scene Controller 2 is our new innovative wall switch. The front is elegantly designed with a uniform diffused backlight in each square. The squares can light up in all colors which can be used to show the status of a lamp, as orientation light during nighttime, visual alarm and much more. Each square is a tactile switch that can hold up to four functions and control either a wired lamp or other Z-Wave devices, e.g. other light dimmers, roller shutters and power outlets.

The Heatit Z-TRM2fx is our newest thermostat, packed with innovative features. The thermostat works both with traditional electrical floor heating and hydronic systems. The thermostat gives you exact temperature measurements in your house, in order for you to monitor your house status while you are away.