Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    ZWave

    ZWave available on eurox10.com

    Show/Hide Categories
    View as Grid List
    Sort by
    Display per page

    Temperature & Humidity Sensor

    €59.96 excl tax
    Secure SES303 is the latest addition to the stylish range of digital environmental sensors. The smart sensor from Secure provides reliable and continuous monitoring of temperature and humidity inside your home, and lets you improve the efficiency of your heating system. The Z-Wave sensor can be integrated easily into your home automation network and configured to be a part of intelligent scenes and scenarios. It can be expanded to work with external wired NTC temperature sensor (SES 001) or pipetank temperature sensors (SES 002 / SES 003). The sensors supports configurable data reporting, and can be configured to transmit the information to an associated device in the Z-Wave network. As the sensor is battery powered, there's no need for external wiring and it can be installed within a matter of minutes.

    Temperature Sensor

    €59.66 excl tax
    The ZWsecSES301 is a battery operated device which acts as temperature sensor. It uses Z-Wave wireless commands to send its temperature data to a controller. The device is IP 30 rated and can therefore only be used in dry environments. The precision of the temperature sensor is +/- 0.5 degree.

    Door- and Window Sensor

    €32.22 excl tax
    This sensor offers information whether a door or window is open or closed. The product consists of a magnetic element and the main unit. One of the parts is mounted on the moving part of the window or of the door. The other part is placed on the frame. The installation can be done with screws or double-sided tape.
    The HSM02 is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The units send information to a controller or any other associated Z-Wave device. Up to 5 devices can be controlled from this device.
    The device needs to be included into a Z-Wave network by a remote control or any other Z-Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.

    Z-Wave motion sensor

    €28.45 excl tax
    Equipment from a partner.
    Brand new in its original blister, never used. Just don't have the manufacturers warranty anymore.
    1 unit available.

    This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.
    The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.
    The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.

    Z-Wave Presence Detector

    €42.53 excl tax

    This presence detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.
    The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered. 

    The device has changeable lenses to optimize the monitoring of the room. A built in 60 db siren can be used if the sensor is in security application mode. A built in light sensor can be used to detect ambient light.

    The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behavior a static controller such as a PC with home automation software or a gateway is required.

    Smoke Detector

    €45.43 excl tax
    The Smoke Detector SF812 uses a non-radioactive photo-sensor for a reliable and safe detection of smoke. Simply install the Smoke Detector on your ceiling and follow the procedure in the manual. Now your room is fitted with an early warning system against smoke. The smoke detector has a test button and a flashing led, so you always know that the smoke alarm is working correctly. The smoke alarm will warn you when the battery is low.

    Warning by sound, email, phone and sms When the Smoke Detector detects smoke, it will give a loud warning sound. The smoke detector will also trigger actions in other Z-Wavew devices or Z-Wave controllers to escalate the alarm.

    Execute a scenario when smoke is detected The Smoke Detector can also activate an alarm-scenario within the Z-Wave network. For example you can create an alarm-scenario to switch on all lights in the house when smoke is detected. So even at the middle of the night, you can leave the house very quickly when smoke is detected.

    Temperature/Humidity Detector

    €48.50 excl tax
    The ST814 is a combined Temperature/Humidity Sensor which is designed for both desktop use and wall mountable. The device has a local LCD display which either shows the temperature or the humidity. 4 buttons allow switching between minimum, maximum or actual values, humidity versus temperature and Fahrenheit versus Celsius The device can report its values via Z-Wave and allows to set trigger level for direct control of other Z-Wave device when the measured value hits the trigger point. This makes the ST814 a very powerful and flexible tool to measure environmental values and control device within a Z-Wave network.

    Motion Detector for indoor - outdoor

    €44.67 excl tax
    This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. It needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required. The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.

    1 Channel Z-Wave 7 Day Time Control and RF Room Thermostat

    €151.80 excl tax
    The SEC_SCP318-SET combines a 7 day single channel timeswitch with a wireless Z-Wave Room thermostat and can be used for adding an extra zone into an existing installation. Because of its TPI energy saving software the user can start to save up to 10% energy consumption. The Programmer and Room thermostat communicate with each other via Z Wave commands.

    Time control
    The SEC_SCP318 timeswitch will allow up to 3 ON/OFF settings per 24 hours 7 days a week. To temporarily override current settings the device has an 1 hour manual Boost Function, which allows the user to boost the system to be currently OFF for 1 hour, and an Advance Function button, which allows the user to advance the system to ON when currently OFF or switch the system OFF when currently ON. Additionally the device has a programming switch allowing permanent selection of: OFF/ON/AUTO/ALL DAY.

    Room thermostat
    The battery operated wall thermostat has a big adjustment wheel which can be used to preset the desired target temperature in the room in a range of 5°C – 30°C. By verifying the target temperature with the measured real temperature closed to the device, the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of Z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings and the local setup.

    1 Channel Z-Wave 7 Day Time Control and RF Room Thermostat

    €162.59 excl tax
    The ZWSECSCS318 is a set which combines a programmable 7 day room thermostat (ZWSECSCS317) with a wirelessly controlled relay switch (ZWSEC_SSR303) used for controlling a central heating. Because of its TPI energy saving software the user can start to save up to 10% energy consumption.

    3xSensative STRIPS Door and Window Sensor

    €127.30 excl tax
    STRIPS by Sensative is an ultra-thin magnetic sensor designed to monitor and protect the status of windows or doors and reports the data to the smart home controller. To do this the sensor can be mounted almost invisibly on frames of doors or windows. Strips by Sensative consists of two components: The thin narrow strip is mounted on the window or door frame and the small square magnet is mounted on the movable part of the window or door.

    Chain Drive for Pivot Windows (230V)

    €297.50 excl tax

    The ZWS230 chain motor is thanks to its small dimensions and suitable force output ideal for roof window operating and is fully compatible with the Z-Wave system. The motor can be used to upgrade centre pivot and top hung and pivot roof windows of different manufacturers.

    The maximum chain reach of the ZW230 is 36cm. The motor is equipped with built-in overload protection which acts as a sensor for correct window closing.

    CO2 Monitor

    €162.59 excl tax
    MCOHome CO2 Monitor is an air quality detector which compatible with Z-Wave technology, it is mainly used to monitor CO2 concentration in industrial, agricultural, and residence environment, while monitoring the indoor temperature and humidity. Device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.

    Dimmer Bypass

    €9.67 excl tax
    The Vision bypass allows operating small loads on Z-Wave controlled 2-wire dimmers.
    In the two-wire system the electronics of the dimmer or switch is powered by one wire coming from the mains supply plus one wire that comes from the load itself.
    This means that even when the load is turned off a small current runs through the load in order to power the Z-Wave electronic. This small current can cause a small load (e.g. a LED bulb with only 9 W) to flicker even when powered off. This flickering will also impact the dimming.

    Double Paddle Wall Dimmer TZ35 - Z-Wave Plus

    €40.64 excl tax
    The Double Paddle Wall Dimmer is a wall switch, which has a dimmer module integrated. The wallswitch has two shift paddles. The dimmer is able to switch one electrical load with up to 300 watts. With the shift paddles you can control the connected electrical load.

    The wallswitch can be easily connected to an electrical load without installing a flush mounted module separately. The dimmer is located inside a module, which is directly connected to the wall switch with the paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Dimmer Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Double Paddle Wall Dimmer TZ55 - Z-Wave Plus

    €40.64 excl tax
    The Double Paddle Wall Dimmer is a wall switch, which has a dimmer module integrated. The wallswitch has two shift paddles. The dimmer is able to switch one electrical load with up to 300 watts. With the shift paddles you can control the connected electrical load.

    The wallswitch can be easily connected to an electrical load without installing a flush mounted module separately. The dimmer is located inside a module, which is directly connected to the wall switch with the paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Dimmer Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Double Switch Relay

    €52.83 excl tax

    WiDom universal Double Switch is an ON/OFF control device designed to independently control two separate loads, suited for use as both a local and remote switch. Similar to the other WiDom “in wall” devices, it can be fully integrated into pre-existing systems and configured to link configurable behaviours to a specific number of clicks, in full interaction with the Z-Wave home automation ecosystem.

    The WiDom universal Double Switch also boasts the lowest energy consumption on the market.

    Energy Monitoring: Each of its two channels features an integrated consumption measurement device.

    Timer Management: Timer management for each independent channel, both switch on and switch off.

    Software Update: You will be able to independently update the device firmware "Over the Air" without even having to remove the devices from their location.

    Extremely low energy usage: In line with the other WiDom products, the WiDom universal Double Switch features the lowest energy usage of all similar devices on the market.

    Intelligent Multichannel: It has two independent channels individually controllable. It can independently control other devices both single channel and multi-channel. For example, you can remotely control the opening / closing of the shutters, to control of dimmable lights, turn on / off remote loads.

    Not all Z-Wave devices support the associations and / or multi-channel associations. When associations are supported, typically are a simple local control reference (if I turn off the local light, I turn off also those associated). With Widom Universal Double Switch you can define the state of local load and the state of the devices associated independently of the load, and you can control them separately activating the recognition sequence of clicks. So you can check the local loads with single click, and the associated devices with double click.

    Ready for installation, but fully configurable: The device is supplied ready for installation but can also be supplied with personalized configurations.

    Energy driven switch shunt version

    €58.82 excl tax
    The smallest device in its category worldwide, and the only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Version S featuring an internal shunt resistor. In addition to Power measurements, the device also provides data for Energy, Voltage, Current and Power factor.
    The only device suited for use with all types of Z-Wave controller, and capable of implementing an active energy-saving management policy defined by the user according to his energy consumption, or to the amount of energy produced by his solar power system.

    Energy driven switch TR version

    €77.23 excl tax
    The smallest device in its category worldwide, and the only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Version C featuring an external current transformer, it is capable of measuring loads exceeding 10 KW. In addition to Power measurements, the device also provides data for Energy, Voltage, Current and Power factor.
    he only device suited for use with all types of Z-Wave controller, and capable of implementing an active energy-saving management policy defined by the user according to his energy consumption, or to the amount of energy produced by his solar power system.

    External Room Sensor for HeatIt

    €39.99 excl tax
    This flat sensor is an optional accessorie for Heat-it thermostats. It allows precise air temperature measuring at any position in the room. Measured values will be reported to the Heat-it for thermostat control.

    The sensor owns a stylish glass surface and can be mounted to the wall directly.

    Fan Coil Thermostat 2 pipe

    €121.94 excl tax
    MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 2-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

    Fan Coil Thermostat 4 pipe

    €121.94 excl tax
    MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 4-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

    Frame + doble paddle BJ white

    €7.99 excl tax
    Bush Jaeger Duro 2000 Set in white composed of frame and single paddle for ZWzmeWALLC-S.

    Frame + double paddle BJ creme

    €7.99 excl tax
    Bush Jaeger Duro 2000 Set in creme composed of frame and single paddle for ZWzmeWALLC-S.

    Frame + double paddle system55

    €9.00 excl tax
    HK 07 Set composed of frame and double paddle for ZWzmeEWALLC-2.

    Frame + paddle

    €9.00 excl tax
    Set Frame + paddle ZWzmeEWALLC-2.

    Frame + single paddle BJ arcticwhite

    €7.99 excl tax
    Bush Jaeger Duro 2000 Set in white composed of frame and single paddle for ZWzmeWALLC-S.

    Frame + single paddle BJ creme

    €7.99 excl tax
    Bush Jaeger Duro 2000 Set in creme composed of frame and single paddle for ZWzmeWALLC-S.

    Hank Smart Plug

    €32.52 excl tax
    With the Smart Plug of Hank you will never worry about a connected iron or coffee machine. Using the intelligent remote controllable wall plug you are able to turn off devices comfortable via Smartphone or Tablet from anywhere.
    You can control and monitor any electrical devices. Due to its energy measurement function, you can also identify all power eaters in your home. The RGB LED ring informs you about the current power consumption of the connected device.
    The Smart Plug offers one special feature: Two USB charging ports with 5V and 2.4A for charging your smartphone or any other USB powered device.
    Furthermore the Smart Plug repeats the wireless signal and so it extends the range of your Z-Wave network.

    Heating Thermostat Comet

    €45.00 excl tax

    The Comet Z-Wave Thermostat heats your room right when you need it. So you do not have to enter a cold bathroom after waking up nor a cold home after coming home from work. In addition the thermostat lowers your heating and its costs.

    Thanks to the Z-Wave wireless technology the Comet thermostat can be included into and controlled by your Z-Wave gateway. Set the room temperature from your smart phone: It does not matter if you are on your couch or on the way. Of course you can define scenes in your smart home gateway which regulate the temperature fully automatic.

    As stand alone solution without a Z-Wave gateway you can program up to 6 times for heating or cooling per day. Thanks to “open window” detection the electric thermostat will stop heating as soon as you open the window to air the room and prevents you from throwing your money out of the window. Other functions like child protection, timer function, frost protection and many more can be activated over the menu-driven display.

    The installation does not require any tools and can be performed without any further knowledge – dead easy!

    Just take off the conventional thermostat and install the Comet. No need to drain water. Adapters for most common valves are enclosed in the package.

    HEIMAN Smoke Sensor

    €32.52 excl tax
    Hopefully, you will never need it, but in case of emergency it will save not only your belongings, but also life. A pot which stands on the stove too long or a forgotten iron…first there will arise smoke, then it will cause a fire.
    The HEIMAN Smart Smoke Sensor owns an accurate capture of smoke and you will alert acousticly and visually. In a serious situation the smoke sensor alerts with a red LED which flashes rapidly and with a noisy alarm. Furthermore there is the opportunity to receive a warning on your smartphone if you are not at home. This prevents a fire emerging from smoke and expensive consequential damages.
    Because of the use of the wireless technology Z-Wave the sensor can be connected to any Z-Wave gateway. Thanks to the latest Z-Wave Plus standard the Smoke Sensor ensures a battery lifetime of 3 years.

    Indoor Siren

    €40.35 excl tax
    The Siren SE812 Siren will warn everybody in the building by a loud sound and a flashing light that an alarm has occurred. This product is especially suited to use in combination with other Z-Wave devices such as sensors.

    Warning by sound and light
    The SE812 Siren gives a loud sound and a flashing warning light, so everybody in the building will know immediately that an alarm has occurred. You can choose to activate the siren either by burglary alarm or by a smoke alarm or activate the siren by both alarms. It is even possible to install multiple sirens, so the alarm can be heard loudly at multiple locations. The SE812 Siren has an adjustable jumper inside, so you can choose between either a 90dB or a 100 dB volume of the siren.

    Powered by power supply or batteries
    Choose either the included batteries or a power supply to power your siren. When using batteries, the siren will give a warning when the batteries are almost empty.

    Neo Coolcam - Siren

    €28.45 excl tax
    he Siren of NEO Coolcam enriches your Smart Home with a further safety factor. In connection with other devices of your Z-Wave network the optical visually appealing siren alerts in different situations. Whether it is as simple as alerting you about a water leak or a more dangerous scenarios such as a fire or break-in, this siren is loud enough to notify both you and your neighbours of potential impending dangers, giving you the chance to respond quickly.

    Besides using the Siren for alarm purposes you can also use the Siren as a doorbell. The NEO Coolcam Siren plays 10 different sounds, which can be set via parameter settings or the Indicator Command class. Furthermore you can adjust the volume of the bell sound and the alarm sound in 3 stages. All in all this device works specifically good for any type of accoustical and optical notification in your Smart Home.

    The battery operated siren with the high quality design harmonizes with every living area and can be placed wherever you want.

    Official Pi Case Red/White

    Call for pricing
    Raspberry Pi presents the official Raspberry Pi 3 case designed to house and protect the Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is sleek and lightweight, and is made of high quality molded plastic. The box for RPi has a modular construction consisting of 5 pieces that easily fit together without using tools or screws. The modular design of this box for Pi 3 Model B allows to disassemble the sides and top to facilitate access to GPIO connections and internal interfaces

    On/off Switch for Everlux

    €16.18 excl tax €60.48 excl tax
    This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical loads. A 230V powered pattress box is needed for installation. The product consists of:
    • the insert, which can be used with or without local control
    • a special mounting plate to mount the insert into a pattress box
    • a mounting frame for Duwi Everlux series , color standard white
    • the switching paddle for local control of the dimmer

    The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations. It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.

    PM2.5 Air Quality Monitor

    €162.59 excl tax
    MCOHome PM2.5 Monitor is an air quality detector which compatible with Z-Wave technology, it is mainly used to monitor PM2.5 concentration in industrial, agricultural, and residence environment, while monitoring the indoor temperature and humidity. Device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.

    POPP 433 Bridge - white

    €40.64 excl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.

    POPP Flood / Water Leakage Sensor

    €35.52 excl tax

    A broken hose at the washing machine or a leaking pipe at the water tap. Even if there is only a small leckage it can cause a big damage. The POPP Water Leckage Sensor is protecting you from that. As soon as the device detects water at his probes an acustic alarm is triggered. Additionally, the LED starts blinking and the alarm signal is sent to the Z-Wave gateway. Because of that, you receive a message on your smartphone and you can act immediately even when you are not at home. Therefore you can prevent high damages because of water.

    Connected to other smart devices like the POPP Flow Stop you can even turn off the water automatically, if there is a leakage in a water pipe.

    The POPP Water Leakage Sensor can be placed underneath a washing machine or a sink. If there is not enough space for the main device you can use the included sensor cable with extra wall mounting plate. The sensor is water resistant and floats (protection class IP44). Thus, it is also suitable for outdoor use.

    Raspberry Pi 3 Modelo B+

    Call for pricing
    Raspberry Pi 3 Model B + is the latest Raspberry Pi computer board. It is a development of the previous Raspberry Pi 3 Model B, which offers improved speed and functionality.

    RaZberry2 - Z-Wave Plug-On Module for Raspberry Pi

    €49.00 excl tax
    The Z-Wave.Me RaZberry turns every Raspberry PI into a Z-Wave smart home gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone.

    The Z-Wave software provides an easy to understand and easy to use interface applying the well-known JavaScript interface technology JSON on a built-in web server. Writing your own home automation apps was never easier and more affordable!

    The RaZberry 2 has an optimized antenna, wherewith the module can achieve a range of up to 200 meters.

    Shock and Vibration Sensor Z-Wave Plus

    €43.00 excl tax

    This sensor detects any vibration or shock of the device it is mounted to. It can therefore be used to protect any valuable goods, windows, doors or any other kind of gear that is not supposed to move or vibrate. The sensor has a manual calibration and adjustment element to adapt the sensitivity to the different applications. The installation can be done with screws or double-sided tape.

    The device is battery-operated and therefore in sleeping mode unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The CR123 Lithium battery lasts 3 ... 5 years in normal operation conditions.

    The units send information to a controller or any other associated Z-Wave device. Up to 5 devices can be controlled from this device.

    A tamper switch protects the device from removal or manipulation if used in security applications.

    Two terminals allows to connection of an external dry contact in parallel to the vibration sensor.

    Single Paddle Wall Dimmer TZ35- Z-Wave Plus

    €37.39 excl tax
    The Single Paddle Wall Dimmer is a wall switch, which has a dimmer module integrated. The wallswitch has one shift paddle. The dimmer is able to switch one electrical load with up to 300 watts. With the shift paddle you can control the connected electrical load.

    The wallswitch can be easily connected to an electrical load without installing a flush mounted module separately. The dimmer is located inside a module, which is directly connected to the wall switch with the paddle. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Dimmer Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Single Paddle Wall Dimmer TZ55- Z-Wave Plus

    €37.39 excl tax
    The Single Paddle Wall Dimmer is a wall switch, which has a dimmer module integrated. The wallswitch has one shift paddle. The dimmer is able to switch one electrical load with up to 300 watts. With the shift paddle you can control the connected electrical load.

    The wallswitch can be easily connected to an electrical load without installing a flush mounted module separately. The dimmer is located inside a module, which is directly connected to the wall switch with the paddle. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Dimmer Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Switch Insert Set Busch-Jaeger DURO 2000 (2-Wire) in Creme White

    €16.18 excl tax €52.76 excl tax
    Replace your conventional wall switch and control the connected load (e.g. ceiling light) in future via Z-Wave wireless technology. Of course local control via wall switch is still possible as is usual. Besides local connected loads (from 10W to 300W) the wall insert can also switch other devices within the wireless network via Z-Wave. For this two switch groups are available: Single and double click. Therewith scene activation is also possible.

    If the Z-wave.me wall is included into a network controlled by a controller that supports Z-Wave all communication with the controller is secure and it only accepts special secure commands. All data that is sent to the controller is secured as well.

    This device is working with a 2-Wire system, so no neutral wire is required for it to work.

    Rocker switch and installation frame in design Busch-Jaeger DURO 2000 (Creme White) are part of this set.

    The Soft Remote - Cozy White

    From €36.50 excl tax

    The NodOn® Soft Remote can control any kind of Z-Wave compliant receiver (standalone mode) such as the switchable plugs, blind controls and dimmers. In addition it is able to trigger scenes/actions via a Z-Wave compliant home automation gateway (gateway mode).

    Spill and shock proof, the Soft Remote can be used anywhere in the house. Its embedded magnet allows to fix the Soft Remote everywhere, from the heater to the fridge door.

    Touch Panel Switch 1 channels

    €91.78 excl tax

    The MCO_TPS411 is a glass-surface wireless actuator able to to switch 1 load up to 1100 W. It is designed for application in round Pattress boxes (according to PT, ES, DE, etc Standard).

    Beside local switching the device can be used to control two groups of directly associated devices or scenes stored in the central controller.

    A blue LED on the button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

    Touch Panel Switch 2 channels

    From €91.78 excl tax

    The MCO_TPS312 is a glass-surface wireless actuator able to to switch 2 separate oads up to 1100 W. It is designed for application in round Pattress boxes (according to PT, ES, DE, etc Standard).

    Beside local switching the device can be used to control two groups of directly associated devices or scenes stored in the central controller.

    A blue LED on every button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

    Touch Panel Switch 4 channels

    €95.73 excl tax

    The MCO_TPS314 is a glass-surface wireless actuator able to to switch 4 separate oads up to 1100 W. It is designed for application in UK Pattress boxes (according to British Standard).

    Beside local switching the device can be used to control four groups of directly associated devices or scenes stored in the central controller.

    A blue LED on every button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

    USB Stick incl. Z-Way Controller Software

    €73.13 excl tax

    This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network.

    The device already contains a license to run Z-Way, the certified Z-Wave Controller software available for various operating systems and platforms.

    This stick and Z-Way work with all certified Z-Wave devices regardless of its vendor or date of origin. Just plug in the USB stick to your Windows or Linux machine or Raspberry Pi and download Z-Way.

    In short UZBWAY = UZB1 + Z-WAY

    Vision PIR-Sensor Z-Wave plus

    €44.63 excl tax
    This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device.
    Up to 4 devices can be controlled from this device.
    Beside the motion detector function the device also works as temperature sensor.
    The installation can be done with screws or double-sided tape.
    The device is battery-operated and therefore in sleeping mode unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus.
    Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced.
    A tamper switch protects the device from removal or manipulation if used in security applications.
    The powerful CR123 Lithium battery lasts 3 ... 5 years on normal operation conditions. The device supports normal Z-Wave inclusion, auto inclusion and network wide inclusion for convenient handling.

    Vision Smoke Detector

    €46.90 excl tax
    This Smoke Detector uses a non-radioactive photoelectron-sensor for a reliable and safe detection of smoke. The smoke sensitivity is 0.5 % /ft … 4 % /ft. The smoke detector has a test button and a flashing led, so you always know that the smoke alarm is working correctly.
    The smoke alarm will warn you when the battery is low. When the device detects smoke, it will give a loud warning sound. It will also trigger actions in other Z-Wave devices or Z-Wave controllers to escalate the alarm.
    The Smoke Detector can also activate an alarm-scenario within the Z-Wave network. For example you can create an alarm-scenario to switch on all lights in the house when smoke is detected. Even at the middle of the night, you may leave the house very quickly when smoke is detected.

    Wall Switch

    €43.91 excl tax
    The SIR 321 is a wirelessly controllable 3 KW wall switch that integrates a easy to use timer function. With this the user can turn on a boiler or a heater/cooler right on the slot and define a maximum heating/cooling time to prevent that the forgotten device continues to draw power when not needed anymore. Z-Wave allows to set the timer function with a granularity of 1 minute, while the local operations defines times between 30 min and 2 hours. An optional temperature sensor turns the device into a temperature monitoring device. The SIR fits into both UK and European 60 mm wall boxes.

    Wall Thermostat with LCD display plus actuator

    €106.05 excl tax €130.44 excl tax
    The ZWSEC_SCP318 is a system to control warm water heating in general and floor heating installations in particular. It consists of a battery operated wall thermostat installed in the room to be controlled and a relay switch to operate the water boiler. The thermostat can be manually operated by the user or remotely operated via z-wave to set the desired temperature level.

    Transmitter

    The ZWSEC_SSR303 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.

    Wallswitch with Dual Paddle TZ36 - Z-Wave Plus

    €37.39 excl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a double paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load.

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with the 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Wallswitch with Dual Paddle TZ56 - Z-Wave Plus

    €37.39 excl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a double paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load.

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with the 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Wallswitch with Single Paddle TZ36 - Z-Wave Plus

    €32.51 excl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a single paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load .

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Wallswitch with Single Paddle TZ56 - Z-Wave Plus

    €32.51 excl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a single paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load .

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Water Heating Thermostat with humidity sensor Version 2

    €121.94 excl tax €191.94 excl tax
    The MCOEMH7H-WH2 thermostat is the second Generation of the MCO Home Underfloor water heating thermostat. The thermostat is designed to be used for room temperature control, equipped with Z-Wave wireless technology. It is applied to control water heating systems such as wall mounted boiler, water valve/pump, under floor pipes, radiator systems etc. and electrical systems such as heating cable, electro-thermal film, heating actuator, electrical globe valve etc. The second Generation has the functionality to be connected in its association group with binary actors like plugs and relays. That allows you full control of any On/Off heating actuator via the MCOEMH7H-WH2 without the permanent use of a static Z-Wave controller. The wall thermostat MCOEMH7H-WH2 requires an installation with permanent mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas. With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc.

    Wireless Z-Wave remote control

    €19.99 excl tax

    Suitable for wireless controls Z-Wave actuators such as dimmers, switches, thermostats or motor controls for blinds or jalousies.

    Devices can be turned on and off but dimmers and motor controls can also be turned into a desired dimming level to motor position by keeping a button pushed and releasing it.

    Additionally the device can act as a primary controller of a Z-Wave network using three dedicated network control buttons located behind a sliding cover.

    The remote control can operate as a secondary control beside an IP-Gateway however it is not possible from this device to activate scenes defined in the IP-Gateway. All scenes and control groups are stored within the remote control and they are also conveniently programmed using the buttons of the remote rather than using wireless commands from an IP-Gateway.

    ZBulb dimmable LED light

    €35.00 excl tax

    The Domitech ZBulb is a fully-dimmable, instant-on LED screw-in light bulb that provides comfortable warm white illumination (2700K). It is controllable and via normal wall switch and Z-Wave wireless as well. Equivalent to a 60-watt incandescent bulb and using only nine (9) watts of energy, ZBulb is estimated to save approximately 140 EU throughout its average lifespan.

    The ZBulb can be used even in two-wire electrical systems where an installation of a standard Z-Wave switch or dimmer will fail. As with all Z-Wave products ZBulb acts as Z-Wave repeater and gives users the convenience of wirelessly controlling lighting from a Z-Wave hub or controller.

    Different from other smartphone controlled LED lights, ZBulb remains controllable via wireless device after it was broken by normal wall switch. This is possible through an ingenious switching technology. With a defined switch process of the wall switch the light can be switched off. Nevertheless it remains controllable via Z-Wave wireless. Thus it is possible to switch on and dim the light again by smartphone, tablet or defined automation scene.

    Furthermore ZBulb is able to memorize the last dim status before shut-off.

    Z-Wave Plus integrated

    ZBulb dimmable LED light (UK)

    €35.00 excl tax

    The Domitech ZBulb is a fully-dimmable, instant-on LED screw-in light bulb that provides comfortable warm white illumination (2700K). It is controllable and via normal wall switch and Z-Wave wireless as well. Equivalent to a 60-watt incandescent bulb and using only nine (9) watts of energy, ZBulb is estimated to save approximately 140 EU throughout its average lifespan.

    The ZBulb can be used even in two-wire electrical systems where an installation of a standard Z-Wave switch or dimmer will fail. As with all Z-Wave products ZBulb acts as Z-Wave repeater and gives users the convenience of wirelessly controlling lighting from a Z-Wave hub or controller.

    Different from other smartphone controlled LED lights, ZBulb remains controllable via wireless device after it was broken by normal wall switch. This is possible through an ingenious switching technology. With a defined switch process of the wall switch the light can be switched off. Nevertheless it remains controllable via Z-Wave wireless. Thus it is possible to switch on and dim the light again by smartphone, tablet or defined automation scene.

    Furthermore ZBulb is able to memorize the last dim status before shut-off.

    Z-Wave Plus integrated

    Z-Uno - Z-Wave Board for Arduino

    €48.36 excl tax
    Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions, keeping maximum flexibility.
    Z-Uno is a fully DIY product. It is made for those who are limited by existing choice of Z-Wave products and wants to extend their smart homes with more sensors and actuators: connect LEDs, buttons, switches, motors or any low voltage sensor including most of Arduino compatible sensors.
    Z-Uno programming is done by writing sketch in simplified C language and loaded into Z-Uno using Arduino IDE. Many examples and comprehensive tutorials will help you to make your own project.
    Being Z-Wave Plus certified device, Z-Uno is the perfect companion for you RaZberry gateway. Z-Uno is compatible with other controllers too: among them Fibaro Home Center 2/Lite, Vera Edge and Zipato Zipabox.

    Z-Wave controlled Boiler Actuator

    €62.04 excl tax
    The ZWSEC_SSR303 is a wirellessly controlled single Relay switch to operate loads up to 3 A / 230 V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Z-Wave controlled Boiler Actuator - two channels

    €69.19 excl tax
    The ZWSEC_SSR302 is a wirelessly controlled double Relay switch to operate loads up to 3 A / 230 V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Z-Wave controlled Radiator Thermostat - Danfoss Living Connect LC-13

    €56.90 excl tax €69.99 excl tax

    Living connect® LC-13 is a Z-Wave controlled electronic radiator thermostat with a new firmware. It is controlled by either a Z-Wave compatible Controller or a central device called Danfoss LinkTM CC. The Danfoss LinkTM CC can also control hydronic and electrical floor heating and on/off switches in a building. living connect® uses Z-Wave wireless communication technology, is easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.

    Living connect® is battery powered, compact and very easy to operate with only three buttons on the front.

    Additionally the temperature can be set wirelessly to a certain set point. The device has a scheduler inside that allows to set up to 9 different set point for each day of a 7 day week. This means that energy saving is even achieved when the controlling device is offline or not working. Local buttons can always overwrite the scheduled setting. living connect® features an open-window function, which closes the valve if the temperature in the room is falling dramatically.

    Z-Wave Data Logger for E-Meters

    €74.00 excl tax
    The Z-Wave Smart Meter Sensor is a compact sensor designed to read meter values from traditional electromechanical and electronic meters with optical port. The sensor is easy to install and ideal for precise meter reading down to 0,1kwh. Its compact size and external wireless transmitter makes it easy to install in any distribution board.

    The device is battery powered (batter last about 1 year) and reports the meter value once per 15 minutes In case there is no Z-Wave network present the device will store values up to 3 month. This ensures that the system can even be used in a minimal configuration with a simple USB Stick (Not part of delivery!) connected to a PC not always up and running.

    Z-Wave Data Logger for Gas-Meters

    €97.55 excl tax

    The Z-Wave Smart Meter Sensor is a compact sensor designed to read gas meter values. Its compact size and external wireless transmitter makes it easy to install in any distribution board.

    The device is battery powered (will last about 1 year) and reports the meter value once in 15 minutes. If there won't be a Z-Wave network, the device will store values up to 3 month. This ensures, that the system can even be used in a minimal configuration with a simple Z-Wave USB Stick (Not part of delivery!) connected to a PC.

    Z-Wave Data Logger Set for E-Meters (including USB flash drive)

    €93.00 excl tax
    The Z-Wave Smart Meter Sensor is a compact sensor designed to read meter values from traditional electromechanical and electronic meters with optical port. The sensor is easy to install and ideal for precise meter reading down to 0,1kwh. Its compact size and external wireless transmitter makes it easy to install in any distribution board.

    The device is battery powered (batter last about 1 year) and reports the meter value once per 15 minutes In case there is no Z-Wave network present the device will store values up to 3 month. This ensures that the system can even be used in a minimal configuration with a simple USB Stick (Not part of delivery!) connected to a PC not always up and running.

    Z-Wave Door Lock with Handle

    €229.00 excl tax
    The ZM 1702 is a Z-Wave controllable door lock that fits into standard European doors. The mechanics can be adopted to right or left opening doors.
    The door lock can be applied for doors from a thickness of 38 mm and up. Since the lock is just a single dead bold lock it will not replace modern three dead bold locking outer doors.
    The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4...8 key long) and to limit the validity of certain key code.

    Z-Wave Dual Paddle Wall Dimmer

    €39.49 excl tax

    The TZ65-D dual wall dimmer is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.

    Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time or two times the switching paddle performs the control. The left paddle controls the local load while the right paddle remotely controls Z-Wave associated devices only. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation. The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style. The mounting frame can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.

    Z-Wave Outdoor Solar Siren

    €203.17 excl tax

    The PoPP Solar Outdoor Siren is a self-sufficient siren for Z-Wave security systems. Due to its large solar panel it can be used without any additional power supply or batteries. The siren can be installed on any place on the outside of the house and can be controlled using Z-Wave. This way it extends security systems and calls attention in case of a triggered alarm. The siren issues a very loud sound (105 dBm) and in parallel some stroboscope light.

    Furthermore the device is self-protecting. Removing the main device from the mounting unit immediately starts the siren and also reports the tamper attempt to the Z-Wave control center. All communication between the Z-Wave controller and the siren is encrypted and secured to protect against manipulation.

    Z-Wave Plug-Dimmer

    €35.76 excl tax

    The BeNext Plug-in Dimmer is an easy to install product, which enables to control and measure appliances up to 150 Watt while taking care of your favorite intensity of light during a particular moment of the day. It is totally up to you. The Plug-in Dimmer has the capability to determine the electricity consumption and to show these values in the BeNext application. The measured energy usage is stored in the internal memory. The Plug-in Dimmer can be controlled locally by the On/Off push button or from a distance with your tablet, PC or smartphone (Android, IOS, Windows).

    Z-Wave Plus - Octan Remote - White

    €48.70 excl tax

    Mobile remote control or wall switch? As of now you don't have to decide for one.

    Z-Wave Plus Wall Switch - White

    €44.71 excl tax

    With the NodOn wall switch, you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.

    Z-Wave Plus Wall Switch - White/Grey

    €44.71 excl tax

    With the NodOn wall switch, you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.

    Z-Wave Single Paddle Wall Dimmer

    €38.50 excl tax

    The TZ65-S single wall dimmer is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol. It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software. Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time or two times the switching paddle performs the control. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation.

    The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style, which can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.

    Z-Wave Single Paddle Wall Switch

    €35.00 excl tax €43.05 excl tax
    The TZ66 single wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.
    Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time or two times the switching paddle performs the control. The left paddle controls the local load while the right paddle remotely controls Z-Wave associated devices only. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation. The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style. The mounting frame can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.

    Z-Wave temperature sensor

    €75.00 excl tax
    This Z-Wave device is used as a central temperature sensor for heating or cooling solutions with multiple actuators. The measured temperature is displayed. Two buttons allow to overwrite the setpoint temperature. It can be used as Z-Wave stand alone temperature sensor or to control heating, cooling of ventilation devices. The overwrite can be terminated for certain hours. After this time the setpoint temperature will go back to the redefined value.
    Beside the two front buttons the device has one more button on the top side. The use of this button wan be defined by the central controller. Possible functions can include a temperature boost (heat up as soon as possible) or the activation of a energy saving mode.

    Z-Wave to IR Extender

    €64.23 excl tax
    Zipato IR Extender is a Z-Wave enabled IR extender that works with Zipato home automation controllers or any other Z-Wave enabled network. It has integrated IR control code library to simplify setup and configuration process. Using it with Zipato controllers and Zipato Rule Creator you can run virtually limitless automation scenarious such as configuring Z-Wave enabled thermostat to automate and remotely control IR enabled air conditioner and many other IR devices.

    Z-Wave USB Stick

    €32.50 excl tax

    This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network.

    A third party controller software compatible to the Sigma Designs Serial API is required to use the functions of the device. The third party software plus this UZB realize a static controller to manage and use Z-Wave devices of various vendors.

    This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The Sigma Designs Serial API specification is available to all owners of a Sigma Designs Z-Wave SDK.


    Please note that this product does not contain a license to run Z-Wave.Me’s controller software Z-Way. You can however upgrade the stick to accommodate this function using a licensing key ZWzme_ZWAYLIC.

    Z-Wave USB Stick

    €30.07 excl tax
    he Vision USB-Stick is a Z-Wave USB dongle. When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB. The primary function of the device is to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technology protocol. Within the Z-Wave wireless network the Z-Stick acts as a static controller with enhanced (SUC/SIS) network management function. In order to use the full functionality a software application such as Z-Cloud or Z-Way is needed to run on the host. Z-Stick supports all kinds of third party software complying with the Zensys Serial API.

    Z-WAY License

    €47.50 excl tax

    This software upgrades a Z-Wave Standard UZB Stick (ZWzme_UZB1) to a UZB stick capable running Z-Wave.Me’s controller software Z-Way. Just install Z-Way, go to the expert User Interface and include the key code you purchased. Every key code can be used only one time and is stored in the UZB Stick it was used for. This Stick is then portable and can be used on other platforms running Z-Way as well. This means UZB1 + Z-WAY => UZBWAY. Note that the license can only be applied when the UZB stick from Z-Wave.Me is used. The software will not work with third party hardware.

    Aeotec Dimmer Bypass

    €11.37 excl tax
    Aeotec Nano Dimmer Bypass for use with Aeotec Nano Dimmer has been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

    Cable for Heat-it Thermostat Software-Updates

    €57.50 excl tax
    With the optional usable cable you can update Heat-it thermostats' software and firmware.

    Flow Stop gas/water shut-off controller

    €105.61 excl tax

    Overflowing bathtubs, leaking washing machines or defects to gas and water pipelines – damages can occur almost anywhere and cause immense costs. The POPP Flow Stop can prevent this – thanks to Z-Wave. Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave technology. This means it is particularly suitable for use in smart homes.

    Even installation is child’s play. The POPP Flow Stop is delivered completely including valve control/motor, power supply, mounting and Quick Start Guide and is easy to assembly on the existing ball stop valve. In doing so, all usual pipe standards, including ½ ” and ¾“, are possible. On this occasion no pipes must be dismantled or even water must be drained. That way the installation is normally done in 5-10 minutes.

    The POPP Flow Stop is driven by a motor and closes the ball valve mechanically. Even though the Motor requires only 12 Volt (1A), it has a high power output as well as high torque, which reliably closes the ball valve in just 10 seconds. Also a manual closing of valve is easily possible in case of power failure – thanks to the clutch release bearing.

    Once the Flow Stop is added to a smart home gateway via Z-Wave, the stop valve can be operated via any PC, notebook, smartphone or tablet. Additionally, in the event of leaking gas or water the smart home gateway – when combined with sensors – is able to stop a further inflow automatically and thus protects against more extensive damage and further danger.

    The POPP Flow Stop is a good piece of security for the intelligent home defending from nasty surprises and high costs due to gas and water damages.

    Hank Four-Button Scene Controller

    €28.45 excl tax
    The Four-Button-Scene Controller of Hank is a battery operated remote control which allows you to control multiple devices within one network by pressing the 4 buttons.
    You can program the scene controller individually and based on your needs. It is programmable so that you can start the coffeemachine out of the bed and the coffee is ready if you come out of the bath room. Another way of use: you install it on the wall and it works like a switch. You have the chance to control up to 12 different scenes from one Four-Button-Scene Controller.
    The Scene Controller works with battery which is rechargeable and there is a low battery alert.

    Hub Z-Wave PoPP

    €161.79 excl tax

    The PoPP Hub is the central head and brain of the smart home made by PoPP. It utilizes the Z-Wave wireless technology to control all smart devices in the home. It is used to control different single devices as well as complete defined scenes and actions combining device functions within the network.

    It needs only a few steps to get your PoPP Hub up and running. Add devices such as switches, lights, thermostats, door locks and various sensors to your home network and define automated scenarios (e.g. „All-off“, „Coming Home“, different light scenes).

    Control all devices in your smart home by wall panel, key fob remote control or with tablet, smartphone and desktop pc by using the internet connection to the PoPP Hub.

    NEO Coolcam - Motion Sensor (PIR) with Light Sensor

    €28.45 excl tax
    The NEO Coolcam Motion Sensor comes with a discret design like a ball and convinces by its high detection range of up to 7 meters. The installation is dead easy thanks to its wallmounting. Furthermore it measures the light sensitivity of the overwatched area in lux.

    Besides the motion sensor detects motion in a distance of up to 7 meters. In combination with other Z-Wave devices the sensor will help you to optimize your energy costs by switching the lights automatically and can also be uses for alarm scenes.

    Pack 3 Z-Wave On/Off Plugs Type F (Schuko) + Remote Control

    €138.17 excl tax

    We combine the high versatility of a remote control to the wirelessly electrical control of loads via Z-Wave. The plug adapter is simply plugged between the wall outlet and the electric device.

    With this basic pack may begin to create a Z-Wave network, since ZWduw064459 command can function as a master controller of a Z-Wave network using three control buttons dedicated network, located behind the cover sliding.

    Popp mains adapter

    €16.25 excl tax
    This optional available power supply allows external powering (220 V) of your Popp Smoke Sensor (ZWPOPE004001).
    Plug the terminal in the connection jack on the backside of the device and then connect red wire with plus pole of your Popp mains adapter and the blue one with minus pole. Now you can plug the Load- and the neutralwire into your Popp mains adapter and the device is ready to use. Nevertheless please do not remove the battery.

    POPP Z-Rain

    €65.03 excl tax

    You want to be informed when it starts raining and your windows are still opened? Or you want to control your garden watering intelligently and you want to note the rainfall as well? The POPP Z-Rain enables this in your Z-Wave Smart Home.

    The Z-Rain has an internal rocker, where the rainwater is collected until the weight of the water tilts the rocker. The tilting will be registered from a reed sensor and counted as well. Based on that the rainfall will then be calculated.

    With the first tilt of the rocker and therefore right to the beginning of the rain you will receive the first value from the Z-Rain. Then you can get a push-message or E-Mail, if one of your windows is still opened and your awning will close automatically.

    The great advantage of the Z-Rain is, that it not only detects rain but also measures the exact amount of rain. A small little shower is not always a reason to close your side windows. You can also configure the value of rain, when you want to be informed about the rain. During a rain fall the Z-Rain reports the amount of rain every 1024 seconds in m3 (total sum of the rainfall), mm per m2 and mm/h (current strength of the rainfall) to the Smart Home Gateway. When the rainfall stops, the last measured value will be sent to the gateway. Afterwards the value will become nil again. With that you can turn off your garden watering with the beginning of a rainfall and turn on the next watering cycle based on the measurements of the last rainfall.

    Thanks to Z-Wave and the operation with two standard AAA batteries the Z-Rain can be placed anywhere in your garden. Because of the integrated battery booster technology, the Z-Rain could possibly have lifetime of up to 5 years depending on the wake-Up interval.

    Radiator Thermostat STELLAZ

    €44.90 excl tax

    StellaZ is a wireless Z-Wave controlled actuator suitable for heating, ventilation and air conditioning systems.

    Sensor, controller and actuator are combined in a single device to allow a self-sufficient energy-efficient room control.

    The device has four different modes (Normal, Energy saving, Frost protection, direct valve control via Z-Wave) to control and regulate the temperature. It is also possible to readout the temperature via wireless Z-Wave requests.

    Open windows are automatically detected and lead to a temporary reduction of the heating power to save energy.

    Raspberry Pi Case, Red/White

    Call for pricing
    This official raspberry Pi case is designed to house and protect your raspberry Pi 4 dashboard while making it look great. It fits raspberry Pi 4 Model B 1 GB, 2 GB and 4 GB. This particular case is red and white.

    Raspberry Pi Power Adaptor, 5.1V / 3A, White EU

    Call for pricing
    This raspberry Pi official power supply is the perfect choice to power your new raspberry board Pi 4 Model B. This PSU works with all the variants of the raspberry board Pi 4, the 1GB, 2GB and 4GB board.

    Scene Master

    €40.64 excl tax
    The Scene Master is a Z-Wave controller which can trigger actions and predefined scenes in a Z-Wave control center. Therefor the device has 8 single buttons and a status LED.
    The Scene Master will be distributed with wall mount where it can be took out for use as portable remote control.

    Secure Z-Wave controlled Boiler Actuator GEN5

    €72.36 excl tax
    The Secure SSR303 Gen 5 is a wirelessly controlled relay switch to operate loads up to 3A/230V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Sensative STRIPS Comfort

    €48.77 excl tax
    The STRIPS Comfort by Sensative is an ultra-thin sensor designed to the temperatur and the light level. Because of its ordinary design the sensor can be mounted almost invisibly on walls or ceilings in the middle of your rooms. Just as well you can use it outdoor.
    In combination with other Z-Wave devices the STRIPS Comfort enables a energy safing way of life and it generates more comfort within your own four walls. If you combine the temperatur and light sensor with the Roller Shutter the blinds or shutters are closed automatically if the temperatur goes above what you desire. So you control the climate in your rooms and secure your furniture at the same time.
    The STRIPS Comfort surprises with its design as well as with its battery which has got a lifetime up to 10 years. Furthermore the strip can alert you if the temperature or the light level reaches above or below a defined value.

    Temperature probe

    €6.37 excl tax
    The SES 001 is an external temperature probe especially selected for use with our ZWSEC_SIR321.It is easy to fit and extends the capability and performance of our comfort control systems. The probe is integrally moulded into a thermoplastic elastomer casing that is flexible, resilient and waterproof.

    The EnOcean® Metering Smart Plug

    €36.50 excl tax
    The EnOcean® Metering Smart Plug can control your appliances, and monitor their energy consumption!

    ZWave

    Filter by:

    Clear All
    Min: €0.00 Max: €724.00
    0 724