Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar
    Fabricante: X10

    Double Button Wall Lamp Switch (2 Wires)

    €37,40 sin IVA
    SKU: S2223
    Disponibilidad: 4 en stock

    Features: Local and remote control for incandescent lamps.
    LED Back light night switch indicator.
    Easy electronic codes setup - within 6 seconds.
    Can be controlled using wall switches or X10 compatible desk-top, wireless infra-red or r.f. handheld controllers. Can even be remotely controlled using phone or PC.
    Respond to X10 All Lights ON/All Units OFF command and Bright/Dim commands.
    Support 2-wires wall connections i.e. no neutral wire required.
    Requires signals to be greater than >100mV and 40W Loads.
    Brightness level memory retention.
    Soft touch push button. Application: Normal Wall switch operation or remote control using any X10 compatible r.f., infra-red, desktop or PC controllers.
    Create multiple scenes controls.
    Can be controlled by event triggering e.g. motion detection, etc.

    Warning: Incandescent (2-wire) switch can only control resistive load =40W (incandescent lamp or halogen lamps, etc). It cannot control inductive or capacitive Load (like: Fluorescent lamps?save-energy lamps etc).





    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    • Malo
    • Excelente

    Features: Local and remote control for incandescent lamps.
    LED Back light night switch indicator.
    Easy electronic codes setup - within 6 seconds.
    Can be controlled using wall switches or X10 compatible desk-top, wireless infra-red or r.f. handheld controllers. Can even be remotely controlled using phone or PC.
    Respond to X10 All Lights ON/All Units OFF command and Bright/Dim commands.
    Support 2-wires wall connections i.e. no neutral wire required.
    Requires signals to be greater than >100mV and 40W Loads.
    Brightness level memory retention.
    Soft touch push button. Application: Normal Wall switch operation or remote control using any X10 compatible r.f., infra-red, desktop or PC controllers.
    Create multiple scenes controls.
    Can be controlled by event triggering e.g. motion detection, etc.

    Warning: Incandescent (2-wire) switch can only control resistive load =40W (incandescent lamp or halogen lamps, etc). It cannot control inductive or capacitive Load (like: Fluorescent lamps?save-energy lamps etc).





    Los clientes que compraron este producto tambien han comprado

    Double Button Wall Lamp Switch (3 Wires)

    €37,40 sin IVA

    Two load appliance in-wall module

    €28,90 sin IVA
    The S2268HE module allow to control two individual loads, being small enough to fit behind a wall switch or junction box. It allows to control both internal relay either using any conventional electric switch (push buttons are not supported) or remotely, using any X-10 compatible controller.

    This module has a special feature which allows setting 16 distinct X-10 addresses to each internal relay. This is very useful to create macros.