Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar

    ESTE EQUIPO ESTÁ DESCATALOGADO

    Fabricante: X10

    Lamp Module

    €29,95 IVA incluido
    The Dimmer plug-in module is a 300W receiver unit that works as a remote dimmer.
    The connected lamp can still be switched on and off locally. The dimmer function, however, is by an X10 remote control.
    The dimmer module can be used at any wall outlet in the house with incandescent lamps between 40W and 300W. As the dimmer is simply inserted into wall outlets like an ordinary plug, there is no installation necessary. Just adjust the settings on the front side to the desired device address (e.g. F9) and note this address down in a list. The lamp connected to the dimmer module can still be controlled locally by its own switch, but do not forget to leave the local switch in the "ON" position, otherwise the lamp cannot be controlled by an X10 controller. Switch the lamp off by remote control.
    The LM12E responds to STANDARD X10 protocols: "All lights on" or "All units off" from any X10 controller set to its house code, regardless of unit code. Or alternatively, by individual unit control using "On", "Off", "Bright" and "Dim".
    SKU: LM12G
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Features: • On/Off and dimmer control of incandescent lighting.
    • Available in a wide range of plug styles (British, German, French, Italian, Euro-style, Swiss, Australian / New Zealand, Danish, Czech etc.).
    • Designed to operate with 230 VAC 60W to 300W incandescent or 12 V halogen lamps.

    TechInfo: • Supply voltage: 230V ±10% 50 Hz
    • Supply current : = 20 mA capacitive
    • Making capacity: 60 to 300W (incandescent + 12 V halogen lamps only)
    • Regulating time: 4,4 sec ± 0,2sec from fully on to off
    • EMC: EN 50081-1, EN 50082-1, EN 6100- 3-2, EN 61000-3-3, EN 60555-2
    • Electrical safety: according to EN 60950 and EN 60065
    • Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
    • Input impedance: = 55 Ohms (L - N) at 120 kHz
    • Ambient temperature:
    - 10° C to + 50° C (operation)
    - 20° C to + 70° C (storage)
    • Dimensions:
    52 x 122 x 33 mm
    (width x height x depth without plug)Warning: By default the Plug type sent is the Shucko (used in Austria, Bulgaria, Croatia, Finland, Germany, Greece, Hungary, Iceland, Latvia, the Netherlands, Norway, Portugal, Serbia, Slovenia, Spain and Sweden).
    If you wish to order another Plug type, when you place your order, please refer the type of plug that you want in the observations field.
    The available Plug types are:

    • AU - Australian;
    • CH - Swiss;
    • F - French;
    • G - Shucko;
    • E - compatible with most types of plugs existent in Europe;
    • I - Italian;
    • IL - Israelian;
    • SA – South African;
    • U – United Kingdom ;







    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    *
    *
    • Malo
    • Excelente
    *
    *
    *
    *

    Features: • On/Off and dimmer control of incandescent lighting.
    • Available in a wide range of plug styles (British, German, French, Italian, Euro-style, Swiss, Australian / New Zealand, Danish, Czech etc.).
    • Designed to operate with 230 VAC 60W to 300W incandescent or 12 V halogen lamps.

    TechInfo: • Supply voltage: 230V ±10% 50 Hz
    • Supply current : = 20 mA capacitive
    • Making capacity: 60 to 300W (incandescent + 12 V halogen lamps only)
    • Regulating time: 4,4 sec ± 0,2sec from fully on to off
    • EMC: EN 50081-1, EN 50082-1, EN 6100- 3-2, EN 61000-3-3, EN 60555-2
    • Electrical safety: according to EN 60950 and EN 60065
    • Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
    • Input impedance: = 55 Ohms (L - N) at 120 kHz
    • Ambient temperature:
    - 10° C to + 50° C (operation)
    - 20° C to + 70° C (storage)
    • Dimensions:
    52 x 122 x 33 mm
    (width x height x depth without plug)Warning: By default the Plug type sent is the Shucko (used in Austria, Bulgaria, Croatia, Finland, Germany, Greece, Hungary, Iceland, Latvia, the Netherlands, Norway, Portugal, Serbia, Slovenia, Spain and Sweden).
    If you wish to order another Plug type, when you place your order, please refer the type of plug that you want in the observations field.
    The available Plug types are:

    • AU - Australian;
    • CH - Swiss;
    • F - French;
    • G - Shucko;
    • E - compatible with most types of plugs existent in Europe;
    • I - Italian;
    • IL - Israelian;
    • SA – South African;
    • U – United Kingdom ;







    Los clientes que compraron este producto tambien han comprado

    Micromódulo de Persianas

    INS 2444-422
    €64,98 IVA incluido
    Este módulo está diseñado para el control de persianas eléctricas.
    Recibe comandos X10.
    Disponibilidad: En existencia

    Sensor oculto de puerta/ventana

    INS_2845-422
    €39,99 IVA incluido

    La paz de mente - es lo que el Sensor Oculto de Puerta lleva a su casa. Con el Sensor y el INSTEON Hub, sabrá siempre si la puerta se ha abierto o si se olvidó de cerrar la puerta del garaje. Lo sensor de puerta se instala en el interior de la puerta o del marco, reportando la actividad de la puerta de forma inalámbrica a su casa.

    Ahora lo ves, ahora no lo ves: Nada hace su hogar más inteligente que la adición de sensores. Por eso hemos creado el sensor oculto de puerta. En lugar de montaje a la superficie de la puerta, el sensor se instala dentro del marco de la puerta o incluso en la propia puerta. El resultado es un sensor completamente oculto que permanece fuera del camino, seguimiento de puertas sin el mínimo impedimento visual.

    Disponibilidad: En existencia

    Double Button Wall Lamp Switch (2 Wires)

    S2223
    €46,00 IVA incluido
    Disponibilidad: 3 en stock

    Internal / External R.F. Motion Detector

    MS13
    €36,78 IVA incluido
    Imagine you won't need to tell the kids any more to turn off the lights when they leave their bedroom. With the MS13E Occupancy Sensor, it will be done automatically. Imagine not having to search for a light switch in the dark. The MS13E will turn on the lights when you enter. And for the "sophisticated", with the CM15 Computer Interface you can set up macros to run when the MS13E senses "occupancy" or not. With the CM11E time-delay feature you could have sequenced lighting. So it's not only the garage or front door lights which you may wish to control by the MS13E Occupancy sensor. However, don't forget everytime a light or heater is switched off because nobody is in the room, you save money. The MS13E Motion Detector sends Wireless Radio Frequency (RF) signals to an X10 Transceiver (TM13E) or any X10 security system base receiver. The receiver then passes the signals onto your house wiring to turn on lights (or appliances) around your home. The MS13E will send a RF signal to turn off the light at the users pre-determined time. The user can set the MS13E to turn off at 1,2,4,8,16,32,64, 128 or 256 minimum later as long as no motion has been detected. Note that the MS13E has a built-in photocell that detects when it's dark. The user can select to use the photocell to only turn lights on when it's dark. In this condition the MS13E does not transmit its RF signal during daylight. Alternatively the user may choose not to use the photocell and the MS13E will transmit day and night that there is someone there. In addition, the MS13E sends signals when it detects dusk and dawn so it can turn a light on when it gets dark and turn it off when it gets light (in addition to turning lights on when it detects motion, when it's dark).

    Encrypted remote control 8 in 1 - touch screen (IR+RF+X10)

    S4073
    €61,50 IVA incluido
    The 4073 is a universal command with a tactile screen, with a backlight of deep blue, especially geared towards the control of X-10 devices by encrypted radio frequency (RF) and infrared (IR) signals, allowing however the control of 4 multimedia devices (DVD, TV, etc.) by IR. It is compatible with the X-10 RF encrypted receiver S4022, being able to control all the house codes, unit codes and the X-10 commands “On”, “Off”, “All Lights On”, “All Units Off”, “Dim” and “Bright”.
    Its memory is well adapted to the day-by-day needs, being able to store 4 macros with up to 8 commands each and to learn IR commands to control 4 different devices.
    It has a keyboard lock and is supplied with a docking base to be applied to the wall.